Method MR31478560500 314 17x8.5 6x5.5 0mm Matte Black Wheel Toyota Tacoma4Runner

Vehicle Fitment

• 2005-2024 Toyota Tacoma (2WD and 4WD, All Trims), 6x139.7mm
• 2003-2026 Toyota 4Runner (2WD and 4WD, All Trims), 6x139.7mm
• 2022-2026 Toyota Tundra (2WD and 4WD, All Trims), 6x139.7mm
• 2024-2026 Toyota Land Cruiser 250 (LC250, All Trims), 6x139.7mm
• 2003-2009 Toyota FJ Cruiser (4WD, All Trims), 6x139.7mm
• 2001-2007 Toyota Sequoia (2WD and 4WD, All Trims), 6x139.7mm
• 2003-2023 Lexus GX (2WD and 4WD, All Trims), 6x139.7mm
• 2021-2026 Ford Bronco (All Trims), 6x139.7mm
• 2019-2023 Ford Ranger (2WD and 4WD, All Trims), 6x139.7mm
• 1999-2018 Chevrolet Silverado 1500 (2WD and 4WD), 6x139.7mm
• 2000-2026 Chevrolet Tahoe, Suburban, and Avalanche (2WD and 4WD), 6x139.7mm
• 2004-2012 Chevrolet Colorado (2WD and 4WD), 6x139.7mm
• 1999-2018 GMC Sierra 1500 (2WD and 4WD), 6x139.7mm
• 2000-2026 GMC Yukon and Yukon XL (2WD and 4WD), 6x139.7mm
• 2000-2026 Cadillac Escalade (2WD and 4WD), 6x139.7mm
• 2004-2021 Nissan Titan (2WD and 4WD), 6x139.7mm
• 2005-2021 Nissan Frontier (2WD and 4WD), 6x139.7mm
• 2003-2017 Nissan Armada (2WD and 4WD), 6x139.7mm
• 2005-2021 Nissan Pathfinder (2WD and 4WD), 6x139.7mm
• 2006-2010 Hummer H3 and H3T, 6x139.7mm

Fitment Notes

• Bolt pattern 6x5.5 is also expressed as 6x139.7mm - both designations refer to the same fitment
• 106.25mm centerbore is hub-centric for Toyota Tacoma, 4Runner, FJ Cruiser, Lexus GX, and pre-2022 Sequoia applications (factory hub bore approximately 106.1mm); no hubcentric rings required for these Toyota and Lexus applications
• 106.25mm centerbore is lug-centric for Chevrolet/GMC, Cadillac, Nissan, Ford Bronco, and Ford Ranger applications - hubcentric rings are recommended for all non-Toyota applications to prevent vibration; confirm the correct ring size for your specific vehicle before installation
• 0mm offset / 4.75" backspacing is the standard neutral-stance fitment for the 17x8.5 6x139.7 segment - the wheel face sits approximately at the vehicle's hub mounting surface centerline, producing a moderately outboard stance that is appropriate for stock-height and mildly lifted Tacoma, 4Runner, and Tundra builds; confirm clearance for your specific trim, suspension, and tire combination before ordering
• Toyota Tacoma, 4Runner, Tundra, and most listed Toyota vehicles require aftermarket conical-seat lug nuts - factory flat-seat lug nuts are NOT compatible with this wheel; lug nuts are not included
• Ford Bronco and Ranger use M14x1.5; Chevy/GMC and Cadillac use M14x1.5; Nissan applications vary by model year - confirm thread pitch and seat type before purchasing separately; lug nuts are not included
• 2019+ Chevrolet Silverado 1500 and GMC Sierra 1500 switched to 6x139.7 - confirm compatibility with your specific year and trim before ordering
• TPMS sensors are not included - purchase separately if required
• Sold individually - one (1) wheel per listing

Features

• Rally Raid / Dakar Rally-inspired 16-spoke design - the MR314 brings a motorsport-derived, functional aesthetic to the Toyota Tacoma and 4Runner platform; the 16-spoke layout creates a dense, structural-looking face with more spoke contact area and visual depth than the 6- and 10-spoke designs dominant in the 6x5.5 segment, referencing the purpose-built competition wheels of professional off-road rally events
• Machined weight-saving pockets in the outer lip with "Method" embossed text - a subtle, integrated branding element and weight-reduction feature unique to the 314 design among Method's street series; the machined pockets are visible along the outer lip profile and distinguish the 314 from the smooth-lip NV, Grid, and Double Standard designs
• Slightly arched spoke faces with a deeply recessed bolt circle - the arched spoke geometry creates a three-dimensional face appearance and the recessed bolt circle partially conceals lug hardware, producing a cleaner and more finished look than flat-faced multi-spoke designs
• Snap-in center cap with embossed METHOD logo - the 314 uses a snap-in cap design; additional snap-in cap styles are available separately
• 17x8.5 at 0mm offset is the standard "full-width" fitment for this bolt pattern - 1" wider and with a more outboard stance than the 17x7.5 +25mm variant, the 17x8.5 0mm configuration is the most popular single MR314 specification on the Tacoma and 4Runner platforms and supports a wider range of tire widths including 265/70R17, 275/70R17, and 285/70R17
• 106.25mm centerbore provides hub-centric fitment on Toyota Tacoma, 4Runner, FJ Cruiser, and Lexus GX applications - the most popular vehicles in this bolt pattern - without hubcentric rings, ensuring maximum wheel centering precision on the primary target applications
• All-matte black finish is the most broadly compatible color option across the full range of vehicles in the 6x5.5 fitment - working equally well on Magnetic Grey, Army Green, Lunar Rock, Midnight Black, and Barcelona Red Metallic Tacoma and 4Runner builds, as well as the full range of Bronco, Silverado 1500, and GMC Sierra 1500 colors
• Solid one-piece cast A356 aluminum construction with T6 heat treatment provides reliable structural performance for daily driving, mixed-use trail, and light off-road applications across all listed platforms
• 2,650 lb. load rating for this 6-lug 6x139.7 configuration - appropriate for standard Tacoma, 4Runner, Silverado 1500, and other listed truck and SUV payloads
• DOT street-legal - suitable for all on-road, daily-driven, and mixed-use applications on all listed vehicles
• Covered by Method Race Wheels' Lifetime Structural Warranty

Specifications

• Part Number: MR31478560500
• Model: Method 314
• Finish: Matte Black
• Wheel Diameter: 17 in
• Wheel Width: 8.5 in
• Bolt Pattern: 6x139.7mm (6x5.5")
• Offset: 0mm
• Backspacing: 4.75 in
• Centerbore: 106.25mm
• Load Rating: 2,650 lbs
• Construction: One-piece cast A356 aluminum, T6 heat treated
• Center Cap: Snap-in with embossed METHOD logo (additional cap styles available separately)
• Warranty: Lifetime Structural

Included Components

• 1x Method 314 Wheel - 17x8.5, 6x139.7, 0mm, Matte Black
• 1x Snap-in center cap with embossed METHOD logo

Product Description

The Method 314 in Matte Black (P/N MR31478560500) is the standard full-width fitment of the MR314 for the 6x139.7 (6x5.5) platform - the 17x8.5 / 6x5.5 / 0mm configuration that represents the most popular single specification of the MR314 on the Toyota Tacoma and 4Runner. The 17x8.5 width provides 1" of additional barrel width compared to the 17x7.5 variant, accommodating a wider range of all-terrain tire sizes including 265/70R17, 275/70R17, and 285/70R17 without the aggressive outboard poke of a negative-offset setup. At 0mm offset and 4.75-inch backspacing, the wheel sits with the face approximately at the centerline of the barrel - a neutral stance that works cleanly on stock-height, leveled, and mildly lifted Tacoma and 4Runner builds across all listed platforms.

The 106.25mm centerbore provides hub-centric fitment on all listed Toyota and Lexus applications without hubcentric rings - the most important practical advantage of the MR314 6x5.5 in this centerbore over lug-centric alternatives. The Dakar Rally-inspired 16-spoke design with machined lip pockets and arched spoke faces distinguishes the 314 from the beadlock-simulation designs that dominate the Method street series, offering a functional, competition-derived aesthetic that is particularly well-matched to the rally and overland build culture surrounding the Tacoma and 4Runner platforms. The all-matte black finish pairs with the complete range of Toyota and Lexus color offerings across all listed applications.

Toyota factory flat-seat lug nuts are not compatible with this wheel; aftermarket conical-seat lug nuts are required. Confirm thread pitch and seat type for your specific vehicle before purchasing separately. Lug nuts not included. Covered by Method Race Wheels' Lifetime Structural Warranty.