MBRP S7024409 3" Cat-Back Exhaust for 2010-2015 Chevy Camaro 6.2L V8 Auto L99

Vehicle Fitment

• 2010-2015 Chevrolet Camaro SS (6.2L V8 L99, Automatic Transmission only)

Fitment Notes

• L99 automatic transmission only -- does not fit LS3 manual transmission
• SS trim only -- does not fit V6 or 1LE models
• Dual rear exit
• Direct bolt-on to factory hangers -- no cutting or welding required

Features

• MBRP Armor Plus series (formerly XP Series)
• Race Profile -- most aggressive sound
• T409 stainless steel construction
• 3 in. mandrel-bent tubing
• 16-gauge tubing
• True X-pipe crossover design
• Dual rear exit
• 4 in. OD T304 mirror-polished dual wall angle cut tips
• Direct bolt-on -- no cutting or welding
• Made in North America
• Lifetime warranty

Specifications

• Part Number: S7024409
• Series: Armor Plus (formerly XP Series)
• Type: Cat-Back, Dual Rear Exit
• Sound Profile: Race
• Tubing: 3 in., 16-gauge
• Main Material: T409 Stainless Steel
• Tip: 4 in. OD, dual wall, angle cut, T304 mirror polished
• X-Pipe: Yes -- true crossover
• Transmission: Automatic (L99) only
• Warranty: Lifetime

Included Components

• All cat-back exhaust pipes and sections
• True X-pipe crossover
• 2x 4 in. OD T304 mirror-polished dual wall angle cut tips
• All clamps, brackets, and hardware

Product Description

The MBRP S7024409 is an Armor Plus 3-inch cat-back exhaust system for the 2010-2015 Chevrolet Camaro SS with the 6.2L L99 V8 and automatic transmission. L99 automatic fitment only -- the LS3 manual Camaro SS uses a different part number. The system features MBRP's true X-pipe crossover design, which balances exhaust pulses between the two cylinder banks for a sharper, more aggressive Race Profile sound and improved exhaust scavenging vs. a conventional H-pipe. On the dyno, MBRP documented gains of 18 RWHP and 22 ft-lbs of torque on the L99 Camaro with this system installed.

Construction is 16-gauge T409 stainless steel with fully mandrel-bent tubing and reinforced welds throughout. Tips are 4-inch OD dual wall angle cut in mirror-polished T304 stainless. Direct bolt-on to factory hangers -- all clamps and hardware included, no cutting or welding required. Made in North America. Backed by MBRP's lifetime warranty.