MBRP S5082AL Armor Lite Dual Cat-Back Exhaust for 2014-19 Silverado/Sierra 1500

Vehicle Fitment

• 2014-2018 Chevrolet Silverado 1500 (4.3L V6, 5.3L V8; One-Piece Driveshaft Only; 2WD/4WD)
• 2014-2018 GMC Sierra 1500 (4.3L V6, 5.3L V8; One-Piece Driveshaft Only; 2WD/4WD)
• 2019 Chevrolet Silverado 1500 Limited / LD (4.3L V6, 5.3L V8; One-Piece Driveshaft Only; 2WD/4WD)
• 2019 GMC Sierra 1500 Limited / LD (4.3L V6, 5.3L V8; One-Piece Driveshaft Only; 2WD/4WD)

Fitment Notes

• Compatible with 4.3L V6 and 5.3L V8 engines only - does not fit the 6.2L V8 or any other engine variant in these model years
• One-piece driveshaft only - does not fit trucks equipped with a two-piece driveshaft; verify driveshaft configuration before ordering
• 2019 fitment applies to the Silverado 1500 Limited and Sierra 1500 Limited (LD - legacy body style) only - does not fit the 2019 new body style (T1XX) Silverado or Sierra 1500
• Aluminized steel construction is recommended for dry climates with minimal rain or road salt exposure - not recommended for heavy snow-belt or high-salt environments

Features

• Street Profile sound tuning delivers a deeper, more assertive exhaust note under throttle while remaining controlled and non-droning at highway cruise - a meaningful improvement over the factory system without aggressive volume
• Dual side exit configuration routes exhaust out of both sides of the truck simultaneously, delivering the symmetrical, performance-oriented appearance behind both rear tires that is the hallmark of this generation's full-size GM truck builds
• Full cat-back design replaces all factory exhaust from the catalytic converter rearward for the maximum flow improvement available in a bolt-on package
• 16-gauge heavy-duty aluminized steel construction with fully sealed seams - the Armor Lite series delivers the same fitment precision and sound profile as MBRP's stainless steel systems at a value price point
• Mandrel-bent 3-inch tubing maintains a consistent internal diameter through all bends, reducing backpressure and lowering exhaust gas temperatures versus the factory system
• Dual mirror-polished T304 stainless steel single-wall rolled angle-cut tips (one per side) provide a durable, bright finish at both exits
• Direct bolt-on installation using OEM factory hanger locations - no cutting, welding, or drilling required
• All necessary hardware, clamps, mid-pipe, over-axle pipes, tailpipes, and muffler included for a complete installation
• Backed by MBRP's 3-Year Warranty under the Armor Lite series designation

Specifications

• Part Number: S5082AL
• Exhaust Type: Cat-Back
• Series: Armor Lite
• Sound Profile: Street Profile
• Exit Style: Dual Side Exit
• Tubing Diameter: 3 inches
• Body Material: 16-gauge aluminized steel
• Tip Style: Single Wall, Rolled Angle Cut
• Tip Outlet Diameter: 3.5 inches OD
• Tip Material: Mirror-polished T304 Stainless Steel
• Tip Quantity: 2 (one per side)
• Driveshaft Requirement: One-piece driveshaft only
• Drivetrain: 2WD / 4WD
• Fuel Type: Gasoline
• Position: Cat-back (replaces all exhaust from catalytic converter outlet rearward)
• Warranty: 3-Year (Armor Lite)

Included Components

• 1x Extension pipe (aluminized steel)
• 1x Mid-pipe assembly (aluminized steel, mandrel-bent 3-inch tubing)
• 1x High-flow performance muffler
• 2x Over-axle pipes (driver side and passenger side)
• 2x Tailpipes
• 2x Mirror-polished T304 stainless steel rolled angle-cut tips (3.5-inch OD, one per side)
• 1x Hardware and installation kit (clamps and mounting hardware)
• 1x MBRP installation instructions

Product Description

The MBRP S5082AL is a 3-inch Armor Lite dual side exit cat-back exhaust system engineered for the 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500, as well as the 2019 Silverado 1500 Limited and Sierra 1500 Limited (LD), equipped with either the 4.3L V6 or 5.3L V8 engine. It is the aluminized steel counterpart to the T409 stainless S5082409 - sharing the same fitment, routing geometry, sound tuning, and exit configuration while using Armor Lite's 16-gauge aluminized steel construction in place of stainless to bring the cost down. As a full cat-back system, the S5082AL replaces all factory exhaust from the catalytic converter rearward - including the extension pipe, mid-pipe, muffler, over-axle pipes, and tailpipes - delivering a comprehensive improvement in exhaust flow, reduced backpressure, and lower exhaust gas temperatures.

MBRP's Street Profile tuning shapes a deeper, more commanding exhaust note under acceleration while keeping the system composed and non-droning at sustained highway speeds. The dual side exit layout exits behind both rear wheels simultaneously, producing the symmetrical performance appearance that defines full-size GM truck builds of this era. Each exit is capped with a mirror-polished T304 stainless steel 3.5-inch single-wall rolled angle-cut tip for a bright, long-lasting finish at both exits. The aluminized steel body uses fully sealed seams at high-risk rust points - a key differentiator from lower-quality budget systems - and is backed by MBRP's 3-Year Warranty.

The same two critical fitment restrictions apply as with the S5082409: this system is compatible with the 4.3L V6 and 5.3L V8 engines only - it does not fit the 6.2L V8 - and it requires a one-piece driveshaft. Owners should confirm their driveshaft configuration before ordering. The 2019 year coverage is limited to the Legacy body style Limited (LD) designation only. Aluminized steel is recommended for dry climates; owners in snow-belt or high-salt regions should consider the T409 stainless S5082409 for longer-term corrosion protection. The S5082AL is the ideal value-tier dual side exit upgrade for 2014-2019 Silverado and Sierra 1500 owners who want proven MBRP fitment and sound quality at the Armor Lite price point.