Maxtrac 510400 Front Extended Brake Lines DOT 2WD for 2015-2024 Colorado Canyon

Vehicle Fitment

• 2015-2024 Chevrolet Colorado (2WD)
• 2015-2024 GMC Canyon (2WD)

Fitment Notes

• Intended for use with MaxTrac lift spindles - required when installing a front lift that would otherwise stretch or bind the factory brake lines
• Fits 2WD models - confirm compatibility with 4WD configurations before ordering
• Sold as a pair (left and right front brake lines)
• DOT compliant - meets federal safety standards for street use
• MaxTrac does not recommend wheels wider than 9" or with less than 4.5" backspacing - doing so voids the manufacturer warranty

Features

• 5-layer construction (Teflon inner liner, Kevlar braid, Vinyl jacket, Stainless steel outer braid, Vinyl protective coating) for maximum burst strength and abrasion resistance
• DOT compliant - fully street-legal and approved for highway use
• 18" length provides the additional slack needed after a front suspension lift - prevents binding, kinking, and contact with suspension components
• Stainless steel braided design offers improved pedal feel and reduces brake line expansion under pressure compared to factory rubber lines
• Backed by MaxTrac's limited lifetime warranty

Specifications

• Part Number: 510400
• Brake Line Type: Extended Front Stainless Steel Braided
• Length: 18"
• Construction: 5-Layer (Teflon / Kevlar / Vinyl / Stainless / Vinyl)
• Compliance: D.O.T. Approved
• Position: Front Left and Front Right
• Quantity: 2 brake lines per order (pair)
• Drivetrain: 2WD

Included Components

• 2x Front Extended Stainless Steel Braided Brake Lines (Left and Right)

Product Description

The MaxTrac 510400 is a pair of front extended stainless steel braided brake lines engineered for 2015-2024 Chevrolet Colorado and GMC Canyon 2WD trucks equipped with MaxTrac lift spindles. When the front suspension is lifted, the factory rubber brake lines can become stretched, kinked, or pulled tight against suspension components - creating a serious safety concern. The 510400 lines, at 18" in length, provide the additional slack needed to accommodate the new ride height while maintaining safe, unrestricted brake fluid flow.

Built with a 5-layer design (Teflon, Kevlar, Vinyl, Stainless, Vinyl), these lines offer significantly greater burst strength and abrasion resistance than factory rubber lines, while the stainless steel braid improves brake pedal feel by reducing hose expansion under pressure. Fully DOT compliant for street use and backed by MaxTrac's limited lifetime warranty, the 510400 is a required safety upgrade when performing a front lift on this platform.