KYB SR4790 Strut-Plus OE Front Right Pre-Assembled Corner Unit 17-22 Honda CR-V

Vehicle Fitment

• 2017-2022 Honda CR-V (1.5L I4 Turbo, FWD and AWD) - Front Right (Passenger Side) Strut Assembly
• Covered 2017-2019 trims: LX, EX, EX-L, Touring (FWD and AWD)
• Covered 2020-2022 trims: LX, EX, EX-L, Touring (FWD and AWD) - 1.5L I4 variants only

Fitment Notes

• NOT compatible with the 2020-2022 Honda CR-V Hybrid - the Hybrid's two-motor powertrain system uses different front suspension tuning and spring specifications; verify your CR-V's powertrain before ordering
• Front Right (passenger side) position ONLY - this is a corner-specific assembly; the front left (driver side) requires KYB SR4789, which must be purchased separately
• Complete corner unit - no spring compressor, strut mount, spring, insulators, bearing plate, boot, or bump stop needed; all components are pre-assembled and ready to install
• Left and right assemblies have side-specific design and components as the manufacturer intended - do not install SR4790 in the front left position
• Fits both FWD and AWD variants of the 5th-generation Honda CR-V (RW/RW1/RW2 platform) with the 1.5L turbocharged engine
• Sold individually - for a complete front axle replacement, purchase one SR4790 (right) and one SR4789 (left)
• Front wheel alignment is required after installation

Features

• Complete Strut-Plus corner unit - pre-assembled and ready to install directly onto the vehicle without a spring compressor, eliminating assembly errors and saving significant installation time over rebuilding a bare strut
• Built around a KYB Excel-G twin-tube gas strut - made on the same KYB OE assembly lines with the same OE-quality components used in Honda production; calibrated to OEA (Original Equipment for the Aftermarket) standards to restore the 5th-generation CR-V's original front ride height, handling, and control characteristics
• Application-engineered high-carbon steel coil spring - fatigue-tested and heat-treated to match the exact corner weight and ride height specifications of the RW-platform CR-V front suspension; features a corrosion-resistant coating for extended service life
• Corner-specific part number and side-specific design - SR4790 is engineered exclusively for the front right (passenger) position, with the correct spring rate, spring seat geometry, bearing plate orientation, and mount design for that corner as Honda intended
• Hand-assembled in-house damping valves calibrated in a pressurized clean room - restores the front suspension's original rebound and compression characteristics, supporting proper operation of the CR-V's Vehicle Stability Assist (VSA), Honda Sensing suite, and ABS systems
• Includes strut mount, upper spring seat, upper and lower spring insulators, bearing plate, boot kit, and bump stop - all OE-quality or better, eliminating the need to source small, hard-to-find components separately
• Thick, rigid strut body and brackets minimize flex and metal fatigue to maintain correct front-end alignment throughout the assembly's service life
• Backed by KYB's Lifetime Warranty on the strut damper; 1-Year Warranty on non-damper components (spring, mount, boot, hardware)

Specifications

• Part Number: SR4790
• Product Line: KYB Strut-Plus
• Type: Complete Front Strut and Coil Spring Corner Unit Assembly
• Position: Front Right (Passenger Side) - corner-specific; see SR4789 for Front Left
• Strut Type: KYB Excel-G Twin-Tube Gas (OEA-classified)
• Engine Fitment: 1.5L I4 Turbo (1497cc) - NOT for CR-V Hybrid 2.0L
• Coil Spring: Included (application-engineered high-carbon steel, corrosion-resistant coating)
• Strut Mount: Included
• Upper Spring Seat: Included
• Upper and Lower Spring Insulators: Included
• Bearing Plate: Included
• Dust Boot Kit: Included
• Bump Stop: Included
• Quantity: Sold Individually
• Warranty: KYB Lifetime Warranty (strut damper); 1-Year Limited Warranty (non-damper components)

Included Components

• 1x KYB Excel-G Twin-Tube Front Right Strut
• 1x Application-engineered high-carbon steel coil spring (corrosion-resistant coating)
• Strut mount
• Upper spring seat
• Upper and lower spring insulators
• Bearing plate
• Dust boot kit
• Bump stop

Product Description

The KYB SR4790 is a Strut-Plus complete front right (passenger side) strut and coil spring assembly for the 2017-2022 Honda CR-V with the 1.5L I4 turbocharged engine (FWD and AWD, all non-Hybrid trims). This part is NOT compatible with the 2020-2022 CR-V Hybrid - confirm your CR-V's powertrain before ordering. This is a corner-specific part for the front right position only - the companion front left assembly is KYB SR4789, sold separately. For a complete front axle replacement, purchase one of each.

The Strut-Plus format eliminates the most demanding steps of a conventional front strut job - no spring compressor, no separate sourcing of mounts, insulators, bearing plate, or bump stops, and no risk of assembly errors. The assembly is pre-built and ready to bolt directly onto the vehicle. At the core is a KYB Excel-G twin-tube gas strut built on the same OE assembly lines used in Honda's original equipment supply, calibrated to OEA (Original Equipment for the Aftermarket) standards - tuned to restore the RW-platform CR-V's original front ride height and handling characteristics. The application-engineered coil spring is matched precisely to the front right corner weight and spring rate specification of the 1.5L CR-V. As a front strut, this assembly also acts as the steering pivot - correct damping and spring rate at this corner are critical to steering response, alignment retention, and the proper function of the CR-V's Honda Sensing safety suite and Vehicle Stability Assist. Backed by KYB's Lifetime Warranty on the strut damper; non-damper components carry a 1-Year Warranty.