Konig SS98514225 SSM 18x9 +22 Gloss Black Machined Lip Wheel 5x114.3 Hub 73.1

Vehicle Fitment

Fits vehicles with a 5x114.3 (5x4.5") bolt pattern and a hub bore of 73.1mm or smaller (hub-centric rings required for smaller hub bores). Common fitments include:

• 2023-2025 Acura Integra (all trims)
• 2019-2025 Acura RDX / TLX
• 2022-2025 Honda Civic Si / Civic Type R
• 2022-2025 Honda HR-V / CR-V
• 2021-2025 Kia K5 / Stinger
• 2020-2025 Hyundai Sonata / Elantra N / Tucson
• 2015-2025 Subaru WRX / WRX STI (5x114.3 applications)
• 2003-2025 Nissan 350Z / 370Z / Z
• 2003-2015 Infiniti G35 / G37 / Q50 / Q60
• 2005-2023 Ford Mustang (5x114.3 applications)
• 2016-2025 Honda Pilot / Passport
• Many additional vehicles with a 5x114.3 bolt pattern - always confirm hub bore and offset compatibility before ordering

Fitment Notes

• Bolt pattern: 5x114.3mm (5x4.5") - confirm your vehicle's bolt pattern before ordering
• Hub bore: 73.1mm - hub-centric rings are recommended for vehicles with a smaller hub bore diameter
• Offset: +22mm - verify clearance with suspension, brakes, and fender wells for your specific application, especially on lowered vehicles
• Lug seat style: 60-degree conical (tapered) - use conical/acorn-style lug nuts; lug nuts are not included
• TPMS sensor compatible - valve stems not included
• Sold individually - one wheel per unit; a set of four requires four units

Features

• Bold wide 5-spoke design with deep machined lip - aggressive fitment aesthetic suited for street and sport compact builds
• Gloss black spoke finish with contrasting natural machined lip for a two-tone look
• One-piece cast aluminum construction - lightweight and strong for everyday street and weekend performance use
• Exposed lug design adds to the performance-inspired visual character of the SSM
• Snap-in center cap with Konig logo included
• TPMS sensor compatible - works with factory and aftermarket TPMS sensors
• Hub-centric ring compatible for a precise, rattle-free fitment on vehicles with a smaller hub bore
• Load rated at 1,518 lbs. per wheel

Specifications

• Brand / Model: Konig SSM (Series 97B)
• Part Number: SS98514225
• Size: 18x9
• Bolt Pattern: 5x114.3mm (5x4.5")
• Offset: +22mm
• Backspacing: 5.87"
• Hub Bore: 73.10mm
• Finish: Gloss Black with Machined Lip
• Construction: One-Piece Cast Aluminum
• Spokes: 5
• Weight: 29 lbs.
• Load Rating: 1,518 lbs.
• Lug Seat: 60° Conical (Tapered)
• TPMS Compatible: Yes
• Center Cap Included: Yes
• Lug Nuts / Valve Stems: Not Included

Included Components

• 1x Konig SSM 18x9 wheel - Gloss Black with Machined Lip
• 1x Snap-in Konig logo center cap

Product Description

The Konig SSM in 18x9 with a +22mm offset delivers the wide, aggressive fitment that sport compact and performance enthusiasts demand, packaged in a bold 5-spoke cast aluminum design with a gloss black finish and deep natural machined lip. The SSM's wide body and relatively low offset push the wheel face outward for a flush, planted stance that pairs well with stock and mildly lowered suspensions across a wide range of 5x114.3 vehicles. The exposed lug design and two-tone finish give it a track-inspired character that stands out without going over the top.

Built from one-piece cast aluminum, the SSM balances everyday durability with competitive weight for a street wheel in this size class. At 29 lbs. per wheel and a 1,518 lb. load rating, it's well suited for spirited street driving and weekend events. TPMS sensor compatibility and hub-centric ring support mean straightforward installation on most applications. Lug nuts and valve stems are not included - be sure to use 60-degree conical seat lug nuts, and confirm offset, hub bore, and brake caliper clearance for your specific vehicle and suspension setup before ordering.