Konig MK87514406 MRK1 17x8 5x114.3 +40 Hyper Carbon Flow Formed Wheel

Vehicle Fitment

• Universal fitment for vehicles with a 5x114.3 (5x4.5") bolt pattern and a hub bore of 73.1mm or smaller (with the use of hub-centric rings where applicable). Compatible with sport compact, sport sedan, and enthusiast vehicles across Honda, Acura, Subaru, Nissan, Mitsubishi, Ford, Mazda, Hyundai, Kia, Toyota, Lexus, and other platforms using the 5x114.3 bolt pattern.
• Use Konig's fitment guide at konigwheels.com to confirm this specific size (17x8, +40mm offset) is appropriate for your vehicle before purchasing.

Fitment Notes

• Offset: +40mm (ET40). A moderately high positive offset appropriate for FWD and AWD vehicles and a wide range of RWD sport compact applications on the 5x114.3 pattern. Verify that +40mm is within the acceptable offset range for your specific vehicle before ordering.
• Hub bore: 73.1mm. If your vehicle's hub bore is smaller than 73.1mm, this wheel will not fit. If your vehicle's hub bore is larger than 73.1mm, hub-centric rings are required to properly center the wheel and prevent vibration. Confirm hub bore before ordering.
• Backspacing: 6.07". Verify backspacing clears your vehicle's suspension components and brake calipers, particularly if running lowered suspension or aftermarket brake systems.
• Load rating: 1,543 lbs per wheel. Verify this meets or exceeds the per-wheel load requirement for your vehicle.
• Hidden lug design - this wheel uses a color-matched cover plate over the lug area. The lugs themselves are standard exposed lugs beneath the plate. Confirm your vehicle's lug nuts are compatible with the wheel's lug seat type before ordering. The cover plate is removable using the included pull tool.
• Sold individually - one wheel per order. Four wheels are required for a complete set.
• The optional AROCOVER (DTM aero-style full-face cover) and red anodized gear caps are sold separately and are not included with this wheel.

Features

• Flow Form construction - Konig's manufacturing process begins with a cast aluminum wheel center, then applies high-pressure hydraulic rollers to the barrel under heat, stretching and compressing the aluminum to the final barrel width and shape. This refines the aluminum grain structure in the barrel, producing a wheel significantly lighter and stronger than a traditional gravity-cast design, with greater elongation and shock resistance properties
• Mesh-style design with motorsport heritage - the MRK1's intricate multi-spoke mesh structure draws direct inspiration from the mesh-style wheels found on iconic race vehicles, combining a classic racing aesthetic with modern Flow Formed engineering. The curved spokes and precision angles create a visually complex, three-dimensional appearance that complements a wide range of vehicle types and colors
• Hidden lug area with color-matched cover plate - the lug bolts are concealed behind a Hyper Carbon-finished aluminum cover plate, creating an ultra-clean, uncluttered wheel face with no visible fasteners. The cover plate is secured with a threaded all-aluminum gear cap finished with a flat pop-in Konig logo. This hidden lug system is a distinctive detail that sets the MRK1 apart from conventional open-lug wheel designs
• Threaded aluminum gear cap system - the gear cap secures the cover plate using a threaded interface for a mechanically positive, vibration-resistant attachment. A gear cap wrench is included with every set of MRK1 wheels for easy tightening and loosening of the cap without specialized tools
• AROCOVER compatible - the MRK1's center cap system is designed to accept Konig's optional AROCOVER, a DTM touring car-inspired full-face aero cover that replaces the standard cover plate and transforms the wheel's appearance entirely. The AROCOVER fits any MRK1 regardless of size, bolt pattern, or offset and is secured with the same gear cap already included with the wheel. The AROCOVER is sold separately
• Knurled bead seats - a textured, knurled surface in the wheel's bead seat area increases friction and mechanical grip between the tire bead and wheel barrel, minimizing tire slip relative to the wheel during hard cornering and aggressive braking
• Hyper Carbon finish - Konig's exclusive Hyper Carbon is described as a deep, wet-look dark grey with exceptional visual depth that creates a dynamic interplay of light and shadow. The finish is darker and richer than conventional gunmetal or matte grey finishes, delivering a sophisticated appearance that distinguishes itself at any viewing angle. Hyper Carbon is the only available finish for the MRK1
• One-piece construction - center and barrel are a single integrated unit with no welds or bonding interfaces
• Non-directional design - can be mounted in any orientation without rotation restriction

Specifications

• Part Number: MK87514406
• Brand: Konig
• Model: MRK1
• Size: 17x8"
• Bolt Pattern: 5x114.3 (5x4.5")
• Offset: +40mm (ET40)
• Backspacing: 6.07"
• Hub Bore: 73.1mm
• Finish: Hyper Carbon (exclusive - only available finish)
• Construction: Flow Formed (One Piece)
• Design: Mesh-Style
• Exposed Lugs: No (hidden lug with color-matched cover plate)
• Directional: No
• Weight: 23 lbs
• Load Rating: 1,543 lbs per wheel
• Quantity: Sold individually (1 wheel per order)
• Warranty: Lifetime structural / 1 year finish
• Available Sizes (5x114.3): 17x8", 18x8.5", 18x9.5"

Included Components

• 1x Konig MRK1 17x8 Flow Formed Wheel in Hyper Carbon
• 1x Color-Matched Hyper Carbon Cover Plate
• 1x Threaded Aluminum Gear Cap with Konig Logo
• 1x Gear Cap Wrench
• 1x Cover Plate Pull Tool
• Note: AROCOVER, red anodized gear caps, lug nuts, and hub-centric rings are sold separately where required

Product Description

The Konig MK87514406 is the MRK1 in 17x8, 5x114.3, +40mm offset, Hyper Carbon finish. It is a one-piece Flow Formed aluminum mesh-style wheel weighing 23 lbs, rated at 1,543 lbs load capacity, and sold individually. Hyper Carbon is the only available finish for the MRK1. Confirm vehicle fitment, hub bore, and lug seat compatibility before ordering.

The MRK1 is Konig's most visually distinctive Flow Form wheel - a modern interpretation of the classic mesh-style racing wheel, built with the same Flow Forming technology used across Konig's performance lineup. The mesh design draws its inspiration directly from the iconic mesh wheels found on legendary race vehicles, and the MRK1's curved spoke structure and precision angles recreate that motorsport aesthetic in a Flow Formed package accessible to street and occasional track use. What sets the MRK1 apart mechanically from other Konig Flow Form wheels is its hidden lug system: the lug bolts are concealed beneath a Hyper Carbon-finished aluminum cover plate, secured with a threaded aluminum gear cap, creating an ultra-clean wheel face with no visible hardware. This is not a simple push-on cap - it uses a threaded interface and includes a dedicated gear cap wrench for secure, tool-assisted installation and removal.

The Hyper Carbon finish is exclusive to the MRK1 - a deep, wet-look dark grey with exceptional visual depth that creates a dynamic light-and-shadow effect across the mesh spoke pattern that standard gunmetal or matte grey cannot replicate. The MRK1 is also compatible with Konig's optional AROCOVER - a DTM touring car-inspired full-face aero cover that mounts over the cover plate using the same gear cap, completely transforming the wheel's appearance into a full-face DTM-style disc. The AROCOVER fits all MRK1 sizes and is sold separately. Knurled bead seats are included for tire bead retention under performance driving conditions. Lug nuts and hub-centric rings are sold separately.