Konig HG88514358 Hypergram 18x8.5 5x114.3 +35 Race Bronze Flow Formed Wheel

Vehicle Fitment

• Universal fitment for vehicles with a 5x114.3 (5x4.5") bolt pattern and a hub bore of 73.1mm or smaller (with the use of hub-centric rings where applicable). Compatible with sport compact, sport sedan, and enthusiast vehicles across Honda, Acura, Subaru, Nissan, Mitsubishi, Ford, Mazda, Hyundai, Kia, Toyota, Lexus, and other platforms using the 5x114.3 bolt pattern.
• Use Konig's fitment guide at konigwheels.com to confirm this specific size (18x8.5, +35mm offset) is appropriate for your vehicle before purchasing. The +35mm offset produces a more outward wheel position than higher-offset variants in the same size - verify clearance against your vehicle's fenders and suspension at your desired ride height.

Fitment Notes

• Offset: +35mm (ET35). This is a moderate positive offset that positions the wheel face further outward toward the fender than higher-offset variants (such as +45mm) in the same size. The +35mm offset is compatible with a wide range of FWD, AWD, and RWD applications on the 5x114.3 pattern and is suitable for both square (all four corners) and staggered front setups. Verify clearance against your vehicle's fender arch, strut body, and suspension geometry at your intended ride height before ordering.
• Hub bore: 73.1mm. If your vehicle's hub bore is smaller than 73.1mm, this wheel will not fit. If your vehicle's hub bore is larger than 73.1mm, hub-centric rings are required. Confirm hub bore before ordering.
• Backspacing: 6.13". Verify backspacing clears your vehicle's suspension components and brake calipers, particularly if running lowered suspension or aftermarket brake systems.
• Load rating: 1,521 lbs per wheel. Verify this meets or exceeds the per-wheel load requirement for your vehicle.
• Exposed lug design - confirm your vehicle's lug nuts are compatible with the wheel's lug seat type (typically conical/tapered seat for aftermarket wheels). Using incorrect lug nuts can damage the wheel seat and create a safety hazard.
• Sold individually - one wheel per order. Four wheels are required for a complete square setup; two are required when used as front wheels in a staggered configuration.

Features

• Flow Form construction - Konig's manufacturing process begins with a cast aluminum wheel center, then applies high-pressure hydraulic rollers to the barrel under heat, stretching and compressing the aluminum to achieve the final barrel width and shape. This refines the aluminum grain structure in the barrel, producing a wheel significantly lighter and stronger than a traditional gravity-cast design with greater elongation and shock resistance properties - without the cost of full forging
• 18.18 lb weight at 18x8.5 - the direct result of the denser, thinner Flow Formed barrel walls, which cannot be achieved through casting at equivalent structural integrity. At 18.18 lbs in an 18" diameter, 8.5"-wide wheel, the Hypergram delivers unsprung weight savings that translate to measurable improvements in acceleration, braking response, and steering feel
• 12-spoke motorsport design - the Hypergram's 12 thin spokes maximize the open area behind the spoke face for big brake kit airflow and caliper clearance, while the spoke count and geometry maintain the structural rigidity required for performance and track driving. The thin, open spoke profile is a performance-first design decision - providing caliper clearance for aftermarket brake upgrades that denser spoke patterns would obstruct
• Big brake kit clearance - the open 12-spoke design was engineered specifically to clear a wide range of aftermarket calipers and rotors. Always verify brake clearance with your specific caliper, rotor, and pad combination before finalizing the purchase - clearance varies by offset, vehicle, and brake kit dimensions
• Race Bronze finish - Konig's Race Bronze is a warm, matte-tinted metallic bronze with motorsport character; the matte quality resists glare and is more forgiving of minor surface contact marks than a high-gloss finish in track and performance street use. Race Bronze pairs well with a wide range of vehicle colors, particularly white, silver, black, and dark finishes common on the vehicles this bolt pattern covers
• One-piece construction - center and barrel are a single integrated unit with no welds, fasteners, or bonding interfaces that could introduce weakness under load
• Non-directional design - can be mounted in any orientation and swapped between axle positions and left/right sides without restriction
• Engraved lip branding - Konig model and brand identification are engraved into the outer lip for permanent, track-proof identification that will not peel or fade
• Snap-in center cap included - a sleek snap-in center cap is provided for a finished hub appearance

Specifications

• Part Number: HG88514358
• Brand: Konig
• Model: Hypergram
• Size: 18x8.5"
• Bolt Pattern: 5x114.3 (5x4.5")
• Offset: +35mm (ET35)
• Backspacing: 6.13"
• Hub Bore: 73.1mm
• Finish: Race Bronze
• Construction: Flow Formed (One Piece)
• Spoke Count: 12
• Exposed Lugs: Yes
• Directional: No
• Weight: 18.18 lbs
• Load Rating: 1,521 lbs per wheel
• UPC: 043482215524
• Quantity: Sold individually (1 wheel per order)
• Warranty: Lifetime structural / 1 year finish
• Other Available Colors in This Size/Pattern: Matte Gray, Metallic Carbon Gray with Machined Lip, Matte Black

Included Components

• 1x Konig Hypergram 18x8.5 Flow Formed Wheel in Race Bronze
• 1x Snap-In Center Cap
• Note: Lug nuts and hub-centric rings sold separately where required

Product Description

The Konig HG88514358 is the Hypergram in 18x8.5, 5x114.3, +35mm offset, Race Bronze finish. It is a one-piece Flow Formed aluminum wheel weighing 18.18 lbs, rated at 1,521 lbs load capacity, and sold individually. Suitable for both square (all four corners) and staggered front setups on 5x114.3 vehicles. Confirm vehicle fitment, offset clearance, hub bore, and lug seat compatibility before ordering.

The Hypergram is Konig's flagship Flow Form performance wheel and among the most widely used track and autocross wheels in the sport compact segment. At 18x8.5 and +35mm, this specific variant occupies the sweet spot for performance street and moderate track use on a broad range of 5x114.3 vehicles - the 8.5" width accommodates 235-245mm performance tires effectively, while the +35mm offset provides a more outward wheel position than the +45mm variant for a more aggressive stance without the fitment restrictions of lower-offset configurations. At 18.18 lbs, the Flow Form process delivers meaningful unsprung weight savings over a comparable cast wheel of the same size, contributing to the sharper turn-in and improved braking response that characterizes lightweight wheel upgrades.

The 12-spoke open design provides clearance for a wide range of aftermarket brake calipers - always verify clearance against your specific brake kit before purchasing. Race Bronze is a matte-tinted metallic bronze available alongside Matte Gray, Metallic Carbon Gray with Machined Lip, and Matte Black in this size and bolt pattern. A snap-in center cap is included. Lug nuts and hub-centric rings are sold separately.