Konig HG8850843G Hypergram 18x8.5 5x108 +43 Matte Grey Flow Formed Wheel

Vehicle Fitment

• Universal fitment for vehicles with a 5x108 bolt pattern and a hub bore of 73.1mm or smaller (with the use of hub-centric rings where applicable). The 5x108 bolt pattern is used across a wide range of Ford, Lincoln, Volvo, Land Rover, and other European and domestic platforms - including the Ford Focus, Fusion, Escape, Edge, Taurus, and Transit Connect; Lincoln MKC, MKX, MKZ, and LS; Volvo S40, S60, S80, S90, V60, V90, XC40, XC60, XC70, and XC90; and Land Rover Discover and Range Rover variants.
• Use Konig's fitment guide at konigwheels.com to confirm this specific size (18x8.5, +43mm offset) is appropriate for your vehicle before purchasing. Always verify fitment with your vehicle's specific model year and trim level.

Fitment Notes

• Bolt pattern: 5x108. This wheel will only fit vehicles with the 5x108 bolt pattern. It is not compatible with the more common 5x114.3 or 5x100 patterns - verify your vehicle's bolt pattern before ordering.
• Offset: +43mm (ET43). A moderately high positive offset appropriate for FWD and AWD vehicles with inboard wheel mounting points typical of European and domestic front-wheel drive platforms. Verify that +43mm is within the acceptable offset range for your specific vehicle before ordering.
• Hub bore: 73.1mm. If your vehicle's hub bore is smaller than 73.1mm, this wheel will not fit. If your vehicle's hub bore is larger than 73.1mm, hub-centric rings are required to properly center the wheel and prevent vibration. Confirm your vehicle's hub bore before ordering.
• Backspacing: 6.44". Verify backspacing clears your vehicle's suspension components and brake calipers, particularly if running lowered suspension or aftermarket brake systems.
• Load rating: 1,521 lbs per wheel. Verify this meets or exceeds the per-wheel load requirement for your specific vehicle.
• Exposed lug design - confirm your vehicle's lug nuts are compatible with the wheel's lug seat type (typically conical/tapered seat for aftermarket wheels). Using incorrect lug nuts can damage the wheel and create a safety hazard.
• Sold individually - one wheel per order. Four wheels are required for a complete set.

Features

• Flow Form construction - Konig's manufacturing process begins with a cast aluminum wheel center, then applies high-pressure hydraulic rollers to the barrel under heat, stretching and compressing the aluminum to the final barrel width and shape. This refines the aluminum grain structure in the barrel, producing a wheel that is significantly lighter and stronger than a traditional gravity-cast design with greater elongation and shock resistance - without the cost of full forging
• 12-spoke motorsport design - the Hypergram's 12 thin, evenly spaced spokes maximize the open area behind the spoke face for big brake kit airflow and caliper clearance while maintaining the structural rigidity needed for performance driving. The open spoke arrangement is a deliberate engineering choice - it provides clearance for aftermarket and OEM+ brake upgrades that would be obstructed by a denser spoke pattern
• Big brake kit clearance - the 12-spoke design was specifically engineered to clear a wide range of aftermarket calipers and rotors. Always verify brake clearance with your specific caliper, rotor, and pad combination before finalizing the purchase - clearance varies by offset, vehicle, and brake kit dimensions
• Matte Grey finish - a neutral, flat-gray tone that pairs well with the wide range of vehicle colors common on the 5x108 platform vehicles (silver, white, black, and blue being most common on Ford, Volvo, and Land Rover applications); the matte finish reduces glare and maintains a clean, purposeful motorsport aesthetic while being more forgiving of minor surface contact marks than gloss finishes
• One-piece construction - wheel center and barrel are a single integrated unit with no welds, fasteners, or bonding interfaces that could introduce weakness under load
• Non-directional design - can be mounted in any orientation and swapped between axle positions without rotation restriction
• Engraved lip branding - Konig model and brand identification are engraved into the outer lip for permanent, track-proof identification
• Snap-in center cap included - a sleek snap-in center cap is included for a finished appearance at the hub center

Specifications

• Part Number: HG8850843G
• Brand: Konig
• Model: Hypergram
• Size: 18x8.5"
• Bolt Pattern: 5x108
• Offset: +43mm (ET43)
• Backspacing: 6.44"
• Hub Bore: 73.1mm
• Finish: Matte Grey
• Construction: Flow Formed (One Piece)
• Spoke Count: 12
• Exposed Lugs: Yes
• Directional: No
• Weight: 20.61 lbs
• Load Rating: 1,521 lbs per wheel
• UPC: 043482217245
• Quantity: Sold individually (1 wheel per order)
• Warranty: Lifetime structural / 1 year finish

Included Components

• 1x Konig Hypergram 18x8.5 Flow Formed Wheel in Matte Grey
• 1x Snap-In Center Cap
• Note: Lug nuts and hub-centric rings sold separately where required

Product Description

The Konig HG8850843G is the Hypergram in 18x8.5, 5x108, +43mm offset, Matte Grey finish. It is a one-piece Flow Formed aluminum wheel weighing 20.61 lbs, rated at 1,521 lbs load capacity, and sold individually. The 5x108 bolt pattern makes this wheel specifically suited to Ford, Lincoln, Volvo, Land Rover, and other 5x108 platform vehicles. Confirm vehicle fitment, hub bore, and lug seat compatibility before ordering.

The Hypergram is Konig's flagship Flow Form performance wheel - a 12-spoke, motorsport-inspired design engineered specifically for lightweight performance and big brake kit clearance. The 5x108 variant in 18x8.5 at +43mm addresses the specific fitment requirements of European and domestic front-wheel drive and all-wheel drive platforms, where the 5x108 bolt pattern and higher positive offsets are standard. The Flow Form process produces a lighter, stronger barrel than gravity casting by refining the aluminum grain structure under pressure - delivering a wheel that performs and weighs like a forged product at a significantly lower price point.

The Matte Grey finish gives this wheel a clean, neutral, low-glare appearance well suited to the range of vehicle colors common on 5x108 platforms. The 12-spoke design provides caliper clearance for aftermarket brake upgrades - always verify clearance with your specific brake kit before purchase. A snap-in center cap is included. Lug nuts and hub-centric rings are sold separately - confirm lug seat type and hub bore for your specific vehicle before ordering.