Konig CT8510025C Countergram 15x8 Flow Formed Wheel Hyper Chrome Machined 4x100

Vehicle Fitment

• Universal fitment - fits all vehicles with a 4x100mm bolt pattern and compatible hub bore/offset
• Bolt Pattern: 4x100mm
• Hub Bore: 73.10mm
• Offset: +25mm (ET25)

Fitment Notes

• This is a universal wheel - always verify your vehicle's bolt pattern, hub bore, offset range, and brake caliper clearance before ordering
• Hub-centric rings may be required if your vehicle's hub bore is smaller than 73.10mm
• Lug nuts are not included - conical seat (60°) lug nuts required
• Lower +25mm offset provides increased brake caliper clearance, ideal for big brake kit applications

Features

• Flow-formed aluminum construction for improved tensile strength and reduced weight over standard cast wheels
• Nine-spoke design with a stepped, machined lip for a classic motorsport-inspired look
• Two face profiles available for different concavity levels
• Hyper Chrome center with Mirror Machined Lip finish for a bold, high-contrast appearance
• KONIG and FLOW FORMED branding etched directly into the lip
• One-piece construction for structural integrity and long-term durability
• Snap-in center cap with Konig logo included
• Low +25mm offset designed specifically to clear big brake kits and aftermarket brake upgrades

Specifications

• Part Number: CT8510025C
• Wheel Diameter: 15 in.
• Wheel Width: 8 in.
• Bolt Pattern: 4x100mm
• Offset: +25mm (ET25)
• Backspacing: 5.48 in.
• Frontspacing: 3.52 in.
• Hub Bore: 73.10mm
• Load Rating: 1,212 lbs.
• Construction: One-Piece Flow Formed Alloy
• Spokes: 9
• Finish: Hyper Chrome Center / Mirror Machined Lip
• Lug Seat: Conical 60°
• Exposed Lugs: Yes

Included Components

• 1x Konig Countergram 15x8 Wheel - Hyper Chrome / Mirror Machined Lip
• 1x Snap-In Center Cap (Konig logo)
• Note: Lug nuts are NOT included

Product Description

The Konig Countergram CT8510025C is a 15x8 flow-formed alloy wheel finished in Hyper Chrome with a Mirror Machined Lip - a design that draws clear inspiration from classic motorsport and time-attack aesthetics. Built using Konig's flow-forming process, the aluminum barrel is compressed under heat and pressure after casting, resulting in a wheel that's stronger and lighter than a conventional cast unit, with better shock resistance and load capacity.

The nine-spoke stepped lip design, combined with the +25mm offset, was engineered with big brake fitment in mind, offering generous caliper clearance for both stock and upgraded brake kits. The 4x100mm bolt pattern fits a wide range of sport compacts and economy performance platforms. As with all universal wheels, confirm your vehicle's offset tolerance, hub bore, and brake clearance before ordering. Hub-centric rings and conical-seat lug nuts (sold separately) are recommended for proper installation.