King Shocks 25001-415 2.5 Front Coilover Pair for 2024+ Toyota Land Cruiser 250

Vehicle Fitment

• 2024-2026 Toyota Land Cruiser LC250 (all trims excluding KDSS and E-KDSS equipped models), 2WD and 4WD, Front
• 2024-2026 Lexus GX550 (all trims excluding Overtrail and KDSS/E-KDSS equipped models), 2WD and 4WD, Front
• 2025-2026 Toyota 4Runner (all trims excluding KDSS and E-KDSS equipped models), 2WD and 4WD, Front

Fitment Notes

• Does NOT fit vehicles equipped with OEM KDSS (Kinetic Dynamic Suspension System) or E-KDSS - verify your vehicle's suspension package before ordering
• Does NOT fit Lexus GX550 Overtrail models
• Front position only - sold as a pair of two coilover assemblies; rear shocks sold separately (see 25001-416)
• Does not include compression adjuster - for the 20-click Wide Range Compression Adjuster version see 25001-415A
• Aftermarket upper control arms are recommended for proper alignment when running at maximum lift height; front kits provide up to a 25% increase in usable wheel travel
• 100% bolt-on installation - no cutting or welding required; all necessary washers, bushings, and nuts included; factory shock mounting bolts are reused
• Includes reservoir brackets

Features

• 2.5" diameter shock cylinder precision bored to ±.001" and honed after cadmium plating - same material specification and tolerances as King's Pure Race series shocks
• External remote reservoir in hard-anodized 6063 aluminum dramatically increases fluid volume and heat dissipation for fade-free performance on sustained hard use
• All-new O.D. threaded end cap design with high-strength stainless steel mounting pin - extruded 6061-T6 aluminum construction throughout
• New improved reservoir mounts - eliminates hose clamps for a cleaner, more secure connection
• New Schrader valve protective cap for added sealing and debris protection
• Heat-treated 2024 aluminum alloy piston with highly developed port geometry for King's signature progressive, fade-resistant damping
• Large-diameter hard-chromed micro-polished shafts (minimum 100,000 PSI tensile strength) for maximum debris resistance and extended seal life
• Fully rebuildable, serviceable, and tunable with simple hand tools - Wide Range Compression Adjuster available as a retrofit (see 25001-415A)
• Hand-built in the USA by King's experienced shock technicians

Specifications

• Part Number: 25001-415
• Position: Front (pair - 2 coilover assemblies)
• Shock Body Diameter: 2.5 inches
• Reservoir: External remote reservoir (6061-T6 extruded aluminum, improved mount - no hose clamps)
• Piston: Heat-treated 2024 aluminum alloy
• Shaft Tensile Strength: Minimum 100,000 PSI (hard-chromed, micro-polished)
• Extended Length: 24.558 inches
• Compressed Length: 18.181 inches
• Stroke: 6.377 inches
• Gas Pressure: 150 PSI
• Lift Compatibility: 0-2.5 inches front lift
• Drivetrain: 2WD and 4WD
• Compression Adjuster: Not included (see 25001-415A)
• Installation: 100% bolt-on; no cutting or welding
• Package Weight: 65 lbs
• Package Dimensions: 36" L x 12" W x 10" H
• Warranty: King Shocks 90-day manufacturer warranty
• Made in USA

Included Components

• 2x King Shocks 2.5" Remote Reservoir Front Coilover Assemblies (driver and passenger side)
• 2x Reservoir brackets
• All necessary washers, bushings, and nuts for installation
• Note: Compression adjuster, rear shocks, and springs are NOT included; factory mounting bolts are reused

Product Description

The King Shocks 25001-415 is a pair of 2.5" remote reservoir front coilover shocks for the 2024+ Toyota Land Cruiser LC250, 2024+ Lexus GX550, and 2025+ Toyota 4Runner - excluding all KDSS and E-KDSS equipped models. Built to the same material specification and tolerances as King's Pure Race series, these coilovers pair a 2.5" shock body with an external remote aluminum reservoir and King's latest generation all-new O.D. threaded end cap with high-strength stainless steel mounting pin and improved reservoir mount design that permanently eliminates hose clamps. The front A-arm geometry on the LC250 platform demands a larger-diameter shock to generate sufficient damping force - the 2.5" body delivers precisely that, with 6.377" of stroke and 150 PSI nitrogen charge providing consistent, progressive damping across the platform's large motion ratio.

With a lift range of 0-2.5" and a 25% increase in usable front wheel travel over stock, the 25001-415 transforms the LC250, GX550, and 4Runner's off-road capability without sacrificing daily-driver ride quality. Installation is 100% bolt-on with all hardware included; aftermarket upper control arms are recommended at maximum lift height for proper geometry. For the version with King's 20-click Wide Range Compression Adjuster, order the 25001-415A. Rear shocks (25001-416 / 25001-416A) are sold separately. Hand-built in the USA with a 90-day manufacturer warranty.