K&N 50-2630 NextGen Cold Air Intake for 2024-2026 Ford Ranger 2.7L V6

Vehicle Fitment

• 2024-2026 Ford Ranger XL (2.7L EcoBoost V6, 4WD)
• 2024-2026 Ford Ranger XLT (2.7L EcoBoost V6, 4WD)
• 2024-2026 Ford Ranger Lariat (2.7L EcoBoost V6, 4WD)

Fitment Notes

• Fits vehicles equipped with the factory 2.7L EcoBoost twin-turbocharged V6 engine only.
• Does not fit 2.3L EcoBoost I4 or 3.0L EcoBoost V6 (Ranger Raptor) models.
• Direct-fit NextGen intake system designed for the factory intake configuration.
• No ECU calibration or tuning is required for the advertised performance gains.

Features

• NextGen cold air intake system engineered specifically for the 2.7L EcoBoost Ranger.
• Dyno-tested to provide up to 14.6 horsepower gain.
• Dyno-tested to provide up to 25.4 lb-ft of torque gain.
• Increases intake airflow by up to 63.5% over the factory intake system.
• Large-diameter rotationally molded HDPE intake tube improves airflow and durability.
• Semi-enclosed NextGen air box helps reduce intake air temperatures while protecting against contaminants.
• Washable and reusable High-Flow Lifetime Air Filter with oiled cotton gauze media.
• Quick-Lock™ filter attachment simplifies installation and filter servicing.
• Up to 100,000 miles between filter cleanings under normal highway driving conditions.
• Typical installation time is less than 60 minutes using basic hand tools.

Specifications

• Brand: K&N Engineering
• Part Number: 50-2630
• Product Type: NextGen Cold Air Intake System
• Vehicle Application: 2024-2026 Ford Ranger
• Engine Compatibility: 2.7L EcoBoost Twin-Turbo V6
• Drivetrain: 4WD
• Intake Tube Material: High-Density Cross-Linked Polyethylene (HDPE)
• Intake Tube Finish: Black
• Filter Media: Oiled Cotton Gauze
• Replacement Filter: RU-5303
• Estimated Horsepower Gain: Up to 14.6 HP @ 5,046 RPM
• Estimated Torque Gain: Up to 25.4 lb-ft @ 3,350 RPM
• Estimated Airflow Increase: Up to 63.5%
• Mounting Position: Engine intake system

Included Components

• 1x HDPE intake tube
• 1x Washable reusable High-Flow Air Filter
• 1x NextGen semi-enclosed air box assembly
• 2x Silicone couplers
• 5x Stainless steel hose clamps
• 1x Mounting hardware kit
• 1x Installation instructions

Product Description

The K&N 50-2630 NextGen Cold Air Intake is engineered specifically for the 2024-2026 Ford Ranger equipped with the 2.7L EcoBoost twin-turbocharged V6 engine. Featuring a large-diameter rotationally molded HDPE intake tube, an oversized washable High-Flow Air Filter, and a semi-enclosed NextGen air box, the system significantly improves airflow while helping shield the intake from engine bay heat. K&N dyno testing demonstrates gains of up to 14.6 horsepower, 25.4 lb-ft of torque, and up to 63.5% greater airflow without requiring an ECU tune.

Designed as a direct-fit replacement for the factory intake, the 50-2630 installs using factory mounting locations and basic hand tools in typically less than one hour. The reusable oiled cotton air filter can provide up to 100,000 miles of service between cleanings under normal highway driving conditions, making this intake an excellent upgrade for improved throttle response, induction sound, and long-term performance.