K&N 77-1576KP Cold Air Intake for 2018-25 Jeep Wrangler JL / Gladiator JT 3.6L V

Vehicle Fitment

• 2018-2025 Jeep Wrangler JL (3.6 L V6, all trims, 4WD)
• 2020-2025 Jeep Gladiator JT (3.6 L V6, all trims, 4WD)

Features

• Mandrel-bent polished aluminum intake tube for increased airflow
• Oversized washable and reusable high-flow cotton gauze air filter
• Heat-shield assembly (where applicable) to isolate intake from engine-bay heat
• Estimated performance gain: ~8.8 HP @ 5400 RPM and ~7.1 lb-ft torque
• Direct-bolt installation using factory mounting points - no major modifications required
• Service interval up to 100,000 miles under normal highway driving for filter cleaning
• Includes all required clamps, couplers and hardware for installation
• Backed by K&N's "No-Hassle" Lifetime Limited Warranty

Specifications

• Part Number: 77-1576KP
• Estimated Horsepower Gain: ~8.8 HP @ 5400 RPM
• Estimated Torque Gain: ~7.1 lb-ft
• Filter Material: Oiled cotton gauze
• Intake Tube Material: Aluminum, bright mirrored polish
• Hose Clamps: Stainless steel worm-gear type, quantity 5
• Couplers: 2 x silicone couplers included
• Weight: approx 10.4 lb (4.7 kg)
• CARB Executive Order: D-269-111 (Check individual vehicle for legality) - *Not legal for sale or use in California on pollution-controlled motor vehicles* (excludes some jurisdictions)

Included Components

• 1x Polished aluminum intake tube
• 1x Oversized high-flow air filter (pre-oiled)
• 1x Heat-shield assembly or bracket hardware kit
• 5x Stainless steel worm-gear hose clamps
• 2x Silicone couplers
• Mounting hardware kit (brackets, bolts, nuts, grommets, edge trim)
• Installation instructions

Product Description

The K&N 77-1576KP Cold Air Intake system is engineered specifically for the Jeep Wrangler JL (2018-25) and Jeep Gladiator JT (2020-25) models equipped with the 3.6 L V6 engine. This vehicle-specific kit replaces the factory intake components with a mandrel-bent polished aluminum tube, oversized high-flow washable filter and all necessary hardware, designed to maximize airflow while retaining direct-bolt installation simplicity.

With estimated gains of approximately 8.8 horsepower and 7.1 lb-ft of torque, this intake offers a noticeable performance boost for daily driving or off-road adventures. The washable filter with a service interval of up to 100,000 miles under normal highway conditions helps cut long-term maintenance costs. Installation is straightforward, typically completed in about one hour using basic hand tools.

Note that this intake is not universally CARB legal - the CARB Executive Order D-269-111 applies to select years/vehicles, and in many states this product is *not legal for sale or use on pollution-controlled motor vehicles*. Always verify local emissions laws and your vehicle's exact engine/trims before purchase.