K&N 50-2545 NextGen Cold Air Intake for 2011-2023 Dodge Challenger 6.4L V8

Vehicle Fitment

• 2011-2023 Dodge Challenger SRT 392 (6.4L HEMI V8, RWD)
• 2015-2023 Dodge Challenger Scat Pack (6.4L HEMI V8, RWD)
• 2015-2023 Dodge Challenger Scat Pack Widebody (6.4L HEMI V8, RWD)
• 2012-2023 Dodge Charger SRT 392 (6.4L HEMI V8, RWD)
• 2017-2023 Dodge Charger Daytona 392 (6.4L HEMI V8, RWD)
• 2015-2023 Dodge Charger Scat Pack (6.4L HEMI V8, RWD)
• 2020-2023 Dodge Charger Scat Pack Widebody (6.4L HEMI V8, RWD)

Fitment Notes

• Fits naturally aspirated 6.4L HEMI V8 engines only.
• Does not fit 5.7L HEMI, 6.2L Supercharged Hellcat, Demon, Redeye, Jailbreak, or 3.6L Pentastar models.
• Direct-fit NextGen intake system utilizing factory mounting locations.
• No ECU tuning is required for the advertised performance gains.

Features

• NextGen cold air intake system engineered specifically for 6.4L HEMI Dodge Challenger and Charger models.
• Dyno-tested to deliver up to 23.8 horsepower at 5,300 RPM.
• Dyno-tested to provide up to 23 lb-ft of torque at 5,300 RPM.
• Increases airflow by up to 17.3% over the factory intake system.
• Large-diameter rotationally molded HDPE intake tube improves airflow efficiency.
• Semi-enclosed NextGen air box helps reduce intake temperatures while protecting against contaminants.
• Oversized washable and reusable High-Flow Lifetime Air Filter with oiled cotton gauze media.
• Filter service interval of up to 100,000 miles under normal highway driving conditions.
• Quick-Lock™ filter attachment simplifies installation and maintenance.
• Typically installs in less than 60 minutes using basic hand tools.

Specifications

• Brand: K&N Engineering
• Part Number: 50-2545
• Product Type: NextGen Cold Air Intake System
• Engine Compatibility: 6.4L HEMI V8 (Naturally Aspirated)
• Drivetrain: RWD
• Intake Tube Material: High-Density Cross-Linked Polyethylene (HDPE)
• Intake Tube Finish: Black
• Air Filter Media: Oiled Cotton Gauze
• Replacement Filter: RU-5301
• Estimated Horsepower Gain: Up to 23.8 HP @ 5,300 RPM
• Estimated Torque Gain: Up to 23 lb-ft @ 5,300 RPM
• Estimated Airflow Increase: Up to 17.3%
• Mounting Position: Engine intake system

Included Components

• 1x HDPE intake tube
• 1x Washable reusable High-Flow Air Filter
• 1x NextGen semi-enclosed air box assembly
• 1x Silicone coupler
• 3x Stainless steel hose clamps
• 1x Mounting hardware kit
• 1x Installation instructions

Product Description

The K&N 50-2545 NextGen Cold Air Intake is engineered for 2011-2023 Dodge Challenger and 2012-2023 Dodge Charger models equipped with the naturally aspirated 6.4L HEMI V8 engine. Featuring a large-diameter rotationally molded HDPE intake tube and a NextGen semi-enclosed air box, the system increases airflow while helping isolate the filter from underhood heat. K&N dyno testing shows gains of up to 23.8 horsepower, 23 lb-ft of torque, and a 17.3% increase in airflow without requiring an ECU tune.

The oversized High-Flow Lifetime Air Filter uses washable, reusable oiled cotton gauze media and can operate for up to 100,000 miles between cleanings under normal highway driving conditions. Designed as a direct-fit replacement for the restrictive factory intake, the 50-2545 improves throttle response, enhances induction sound during acceleration, and installs using factory mounting locations with basic hand tools.