K&N 69-2544TP 69 Series Typhoon Cold Air Intake for 11-23 Charger/Challenger 3.6

Vehicle Fitment

• 2011-2023 Dodge Charger 3.6L Pentastar V6
• 2011-2023 Dodge Challenger 3.6L Pentastar V6
• 2011-2023 Chrysler 300 3.6L Pentastar V6
• 2012-2023 Chrysler 300C 3.6L Pentastar V6

Fitment Notes

• Replaces entire factory air filter and intake tube assembly
• Accommodates factory air temperature sensor and crankcase vent hose
• Uses existing factory mounting points -- no drilling or permanent modification
• Heat shield installs into factory airbox location
• No tune required -- will not void vehicle warranty
• 2011-2014 model years are 50-state legal
• 2015+ model years are NOT legal in California or CARB-adopting states
• Install time approximately 60-90 minutes with basic hand tools

Features

• 69 Series Typhoon -- complete cold air intake replacement
• Guaranteed HP increase -- estimated +7.42 HP at 5,095 RPM
• Estimated +7.7 lb-ft of torque gain
• Mandrel-bent polished aluminum intake tube for smooth unrestricted airflow
• Oversized conical K&N high-flow air filter with oiled cotton gauze media
• Custom heat shield isolates cool incoming air from engine bay heat
• Up to 100,000 miles between filter servicing under normal highway driving
• Washable and reusable lifetime air filter
• Improved throttle response, acceleration, and engine sound

Specifications

• Part Number: 69-2544TP
• Series: 69 Series Typhoon
• Intake Type: Cold air intake system
• Intake Pipe Material: Aluminum, mandrel-bent
• Intake Pipe Finish: Polished
• Filter Media: Oiled cotton gauze
• Filter Shape: Round conical
• Filter Color: Red
• Filter Height: 6.5 in (165mm)
• Flange Inside Diameter: 6.0 in (152mm)
• Replacement Filter: RU-1042 / RF-1042 / RU-1042XD
• Clamps: 5x stainless steel
• Couplers: 2x silicone
• Estimated HP Gain: +7.42 HP at 5,095 RPM
• Estimated Torque Gain: +7.7 lb-ft
• CARB EO: D-269-97 (year-specific -- see Fitment Notes)
• Warranty: K&N No-Hassle Lifetime Limited Warranty
• UPC: 024844304742

Included Components

• 1x mandrel-bent polished aluminum intake tube
• 1x K&N high-flow oiled cotton gauze conical air filter
• 1x custom heat shield
• 5x stainless steel clamps
• 2x reinforced silicone couplers
• Mounting hardware and brackets
• Installation instructions

Product Description

The K&N 69-2544TP is a 69 Series Typhoon cold air intake system for the 2011-2023 Dodge Charger, Dodge Challenger, and Chrysler 300/300C equipped with the 3.6L Pentastar V6. This bolt-on kit replaces the restrictive factory air filter and intake tube with a free-flowing mandrel-bent polished aluminum intake tube, an oversized K&N high-flow oiled cotton gauze conical air filter, and a custom heat shield that directs cooler outside air into the engine. The polished aluminum tube accommodates the factory air temperature sensor and crankcase vent hose for a seamless installation using existing mounting points. Dyno-tested with an estimated gain of 7.42 horsepower and 7.7 lb-ft of torque, the Typhoon delivers improved throttle response and a more aggressive engine note across the full RPM range. The oversized filter goes up to 100,000 miles between servicing and is fully washable and reusable. Installs in approximately 60-90 minutes with basic hand tools and no permanent modifications. Backed by K&N's No-Hassle Lifetime Limited Warranty.