Innovative Mounts 90050-75A 96-00 Honda Civic K-Swap Engine Mount Kit 75A

Vehicle Fitment

• 1996-2000 Honda Civic CX, DX, EX, HX, LX (EK/EJ)
• 1998-2000 Honda Civic GX (EK/EJ)
• 1999-2000 Honda Civic Si (EK/EJ)
• 1999 Honda Civic Value Package (EK/EJ)

Engine Fitment

• Honda K20A2 (2.0L I4)
• Honda K20A3 (2.0L I4)
• Honda K20Z1 (2.0L I4)
• Honda K20Z3 (2.0L I4)
• Honda K24 (all variants)

Fitment Notes

• K20 transmission required -- does not fit TSX (K24A2) transmission
• Manual or automatic chassis -- designed for both EK/EJ subframe configurations
• Stock subframe -- does not require subframe modification
• Uses OEM hardware -- no additional fasteners required
• Mounts cannot be returned after bolting down (bolt impressions reveal installation)
• Professional installation strongly recommended

Features

• Innovative Mounts K-Swap conversion mount kit -- purpose-built for EK K-Series swap
• 75A bushing hardness -- street/performance balance (85A track, 95A race)
• Unique no-tear vibration minimizing polyurethane bushings
• Eliminates OEM fluid-dampening mount oil chambers -- reduces wheel hop
• CAD/CAM designed and stress analyzed
• Black powder coat finish
• Lifetime warranty

Specifications

• Bushing hardness: 75A
• Finish: Black powder coat
• Subframe: Stock (no modification required)
• Transmission compatibility: K20 only (not TSX)
• Weight: 25 lbs.
• Warranty: Lifetime

Included Components

• Complete K-Series conversion mount kit
• OEM-spec hardware

Product Description

The Innovative Mounts 90050-75A is a K-Series conversion motor mount kit for the 1996-2000 Honda Civic EK/EJ with stock subframe. Designed for K20 and K24 engine swaps into the EK chassis, this kit bolts directly to the stock subframe without modification and uses OEM-spec hardware -- eliminating the need to source additional fasteners. The 75A bushing hardness is Innovative's street/performance calibration, absorbing enough vibration for daily driving while being significantly stiffer than the OEM fluid-damped mounts to reduce wheel hop and improve throttle response.

Innovative removes the oil-filled chambers of the OEM mounts entirely -- those chambers soften engine response under hard acceleration by allowing excess engine movement. The 75A polyurethane insert transmits power more directly while maintaining a level of NVH compliance above the 85A track and 95A race variants. K20 transmission required -- not compatible with the TSX (K24A2) transmission. Mounts cannot be returned after installation; verify fitment before bolting down. Professional installation strongly recommended. Lifetime warranty.