ICON Alloys Rebound 18x9 6x5.5 0mm Double Black Simulated Beadlock Wheel

Vehicle Fitment

• Fits vehicles with a 6x5.5" (6x139.7mm) bolt pattern and hub bore of 106.1mm or smaller (hub-centric rings required for hub bores smaller than 106.1mm)
• Common 6x5.5" fitment vehicles include: Toyota Tundra (2000-2021), Toyota Sequoia (2001-2022), Toyota 4Runner (select years), Toyota FJ Cruiser (2007-2014), Toyota Tacoma (select years/configurations), Chevrolet Silverado 1500 (2014+), GMC Sierra 1500 (2014+), Chevrolet Tahoe/Suburban (2015+), GMC Yukon/Yukon XL (2015+), Cadillac Escalade (2015+), Chevrolet Colorado (2015+, 6-lug), GMC Canyon (2015+, 6-lug), Nissan Titan (2004+), Ford Bronco (2021-2024), Ford Ranger (2019-2023), Lexus LX600 (2022+), Jeep Gladiator JT, Jeep Wrangler JL (select 6-lug configurations)
• Always verify offset, hub bore, brake caliper clearance, and suspension lift compatibility with your specific vehicle and tire setup before installation. The 0mm offset and 5" backspacing configuration is engineered to optimize wheel position on supported platforms in conjunction with ICON Vehicle Dynamics suspension lift systems.

Fitment Notes

• Sold individually - one (1) wheel per listing. A full set of four requires four units.
• Lug nuts are NOT included - this wheel uses exposed lugs. Verify lug nut seat type (conical/tapered, ball seat, or flat seat) and thread pitch for your specific vehicle before purchasing hardware.
• Hub-centric rings may be required for vehicles with hub bores smaller than 106.1mm - confirm your vehicle's hub bore diameter before installation.
• The simulated beadlock ring is a cosmetic feature only - it does NOT function as a beadlock and requires no special installation tools or maintenance. This wheel is fully DOT compliant for on-road use. For functional bead retention, see the ICON Alloys Rebound Pro with InnerLock technology.
• At 0mm offset with 5" backspacing, this wheel sits more outboard than the 25mm offset (5.75" BS) Rebound variant. Verify inner and outer clearances - including suspension components, inner fender wells, and fender lips - for your specific vehicle, lift height, and tire width before installation.
• Professional mounting and balancing with an appropriately sized tire prior to vehicle installation is recommended by ICON.
• TPMS sensors from existing wheels can typically be transferred to these wheels - confirm compatibility with your installer.

Features

• ICON Alloys Rebound 18x9 - the larger-diameter, wider 18x9 iteration of ICON's purpose-built off-road truck and SUV wheel, engineered specifically for the midsize, full-size, and heavy-duty pickup and SUV market with ICON-optimized fitment dimensions.
• Double Black finish - Satin Black spoke faces and barrel paired with a Gloss Black Simulated Beadlock ring, creating a two-tone, high-contrast all-black aesthetic that stands apart from single-finish black wheels.
• Gloss Black Simulated Beadlock ring - a cosmetic outer ring that replicates the bold, industrial look of a functional beadlock wheel while remaining fully DOT compliant for street use. No maintenance, specialty tools, or periodic re-torquing required.
• Concave 8-spoke window design - each of the eight spokes features a concave face profile creating a deep, aggressive visual appearance, with open window sections that allow brake hardware to remain visible through the wheel face.
• ICON-optimized dimensions at 0mm offset / 5" backspacing - engineered to maximize caliper clearance, reduce scrub radius, optimize wheel position for unobstructed suspension travel and steering function, and improve all-around handling and ride quality. Ideal complement to ICON Vehicle Dynamics suspension systems.
• 2,750 lb. load rating per wheel - confirmed by ICON for all 6-lug Rebound 18x9 variants; engineered for the sustained loads of lifted full-size and midsize trucks and SUVs in both on-road and off-road conditions.
• One-piece gravity-cast aluminum alloy construction - molten aluminum alloy is poured into the wheel mold and fills using gravity, producing a strong, consistent-density wheel throughout the spoke and barrel structure.
• Reduced unsprung weight and rotating mass - the aluminum alloy one-piece construction keeps wheel weight down to improve acceleration, braking, and suspension response compared to heavier steel alternatives.
• Maximized caliper clearance - designed to clear the majority of stock and aftermarket brake hardware on supported truck and SUV platforms without requiring spacers or adapters.
• Branded center cap included - ICON Alloys logo center cap installed at factory.
• Made in USA by ICON Vehicle Dynamics - backed by a Lifetime Warranty.

Specifications

• Part Number: 1818908350DB
• Brand: ICON Alloys / ICON Vehicle Dynamics
• Model: Rebound
• Wheel Diameter: 18 in.
• Wheel Width: 9 in.
• Bolt Pattern: 6x5.5" (6x139.7mm)
• Offset: 0mm
• Backspacing: 5.0 in.
• Hub Bore: 106.1mm
• Load Rating: 2,750 lbs. per wheel
• Spoke Count: 8 (concave window design)
• Construction: One-piece gravity-cast aluminum alloy
• Finish: Double Black - Satin Black with Gloss Black Simulated Beadlock Ring
• Beadlock: Simulated (cosmetic only) - NOT a functional beadlock; DOT compliant
• Lug Style: Exposed lugs
• Lug Nuts: Not included
• Center Cap: Branded ICON Alloys center cap included
• Warranty: Lifetime

Included Components

• 1x ICON Alloys Rebound 18x9 wheel - Double Black (Satin Black with Gloss Black Simulated Beadlock Ring)
• 1x Branded ICON Alloys center cap
• Lug nuts NOT included - purchase separately to match your vehicle's lug seat type and thread pitch

Product Description

The ICON Alloys Rebound 1818908350DB is the 18x9, 0mm offset Double Black variant of ICON's Rebound wheel series - a larger, wider format designed for midsize and full-size truck and SUV owners who want an aggressively positioned wheel with a flush or slightly outboard stance. The 0mm offset and 5" backspacing combination places the wheel face further outboard than the 25mm offset Rebound variant, producing a more aggressive visual stance and a wider effective track, while still maintaining the ICON-engineered clearance requirements for brake calipers and suspension components on supported platforms.

The Double Black finish is a deliberate design choice that distinguishes this variant from single-finish alternatives. The satin black main body pairs with a gloss black simulated beadlock ring - two distinct black textures and reflectivities that create depth and contrast across the wheel face. The simulated beadlock ring is purely aesthetic: it offers the industrial, purpose-built appearance of a functional beadlock without requiring the installation complexity, periodic hardware re-torquing, or DOT compliance limitations that real beadlock wheels carry. The concave 8-spoke window design adds further visual depth, with each spoke curving inward as it extends toward the barrel, and open window sections showcasing the brake hardware behind.

At 18x9 with a 2,750 lb. per wheel load rating, the Rebound is built for the real demands of lifted trucks that tow, haul, and run off-road - not merely for appearance. One-piece gravity-cast aluminum alloy construction keeps rotating mass in check while maintaining the structural integrity required for sustained off-road use. The 106.1mm hub bore centers the wheel on Toyota and select other 6x5.5" platforms; hub-centric rings should be used for vehicles with smaller hub bores. Sold individually; a complete set of four requires four units. Lug nuts are not included - purchase separately for your vehicle's lug seat type and thread pitch. Backed by ICON Vehicle Dynamics' Lifetime Warranty.