ICON 48700E V.S. 2.5 Series Front Coilover Kit w/ CDEV for 2021-2026 Ford Bronco

Vehicle Fitment

• 2021-2026 Ford Bronco (Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, Heritage Limited - 2WD/4WD, All Engines)

Fitment Notes

• Does not fit Ford Bronco Raptor
• Lift height range is 1.5-2.5" over stock on Bronco Everglades
• Non-Sasquatch Broncos: adjustable 1.5-4" of front lift; OEM wheels and tires will NOT fit - aftermarket wheels required
• Sasquatch Broncos: adjustable 2-3" of front lift; OEM wheels and tires will fit
• Factory UCAs will not align properly above 2.5" of lift - ICON UCAs with Delta Joint Pro (48400DJ or 48500DJ) strongly recommended above 2.5" lift
• When running 35" tires on Non-Sasquatch Broncos, High Clearance Crash Bar Kit #42000 is recommended
• When running 37" tires, up-travel limiters #611075 are required in the front; crash bar removal may also be required
• Fitment tested with ICON and OE steering components only - certain aftermarket steering components may not be compatible due to tight coilover clearances
• Requires installation of ICON 2.5 Series CDEV rear coilovers (#48710E) and IIC Install Kit (#43501) for full system operation
• ICON Intelligent Control (IIC) app requires an iOS device
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation

Features

• ICON Compression Damping Electronic Valve (CDEV) enables lightning-fast, on-the-fly electronic compression damping adjustment at any speed and in any terrain
• ICON Intelligent Control (IIC) uses onboard G-force sensors and gyroscope to make near-instantaneous damping changes - processing data over 1,000 times per second with sub-40ms response time
• Increases front wheel travel up to 11.5" over stock for maximum off-road performance
• Remote reservoirs significantly increase shock oil volume and heat dissipation, preventing overheating and cavitation under hard use
• Vehicle-specific shock length, valving, and ICON-engineered coil springs tuned specifically for the Ford Bronco platform
• 6061 aircraft-grade aluminum CNC machined components with corrosion-resistant CAD-plated shock bodies
• 7/8" diameter induction-hardened shock shaft with FK rod end bearings for extended longevity and minimal deflection
• 100% bolt-on installation - no drilling, cutting, or welding required; fully rebuildable and re-tunable

Specifications

• Position: Front
• Lift Height (Non-Sasquatch): 1.5-4"
• Lift Height (Sasquatch): 2-3"
• Lift Height (Everglades): 1.5-2.5"
• Shock Body Diameter: 2.5"
• Shaft Diameter: 7/8" (0.875")
• Max Front Wheel Travel: 11.5"
• Reservoir Type: Remote Reservoir
• Damping Adjustment: Electronic (CDEV) - user-adjustable via IIC iOS app
• Spring Type: Linear Rate, ICON Engineered
• Body Material: 6061 Aircraft-Grade Aluminum (CNC Machined)
• Shaft Finish: CAD-Plated, Corrosion Resistant
• Lower Mount Type: CNC Machined High-Strength Alloy Bar Pin
• Upper Mount Type: Mounting Plate
• Shipping Weight: 52.0 lbs
• Shipping Dimensions: 27.0" L x 13.0" W x 7.0" D
• UPC: 840103412382

Included Components

• 2x V.S. 2.5 Series Front Coilover Shocks with Remote Reservoir and CDEV
• 2x ICON-Engineered Coil Springs
• 2x Compression Damping Electronic Valves (CDEV)
• All required mounting hardware

Product Description

The ICON 48700E is ICON's most advanced front coilover kit for the 2021-2026 Ford Bronco, combining the proven 2.5 Series remote reservoir platform with Compression Damping Electronic Valve (CDEV) technology. With up to 11.5" of front wheel travel and adjustable lift heights ranging from 1.5-4" (Non-Sasquatch) or 2-3" (Sasquatch), this kit transforms the Bronco's front suspension for serious off-road capability while maintaining excellent on-road ride quality. The remote reservoirs increase shock oil volume and heat dissipation to eliminate damper fade during extended hard use, and the ICON-engineered coil springs are custom-tuned specifically for the Bronco platform.

What sets the 48700E apart is its integration with ICON's Intelligent Control (IIC) system. When paired with CDEV rear coilovers (#48710E) and the IIC Install Kit (#43501), the system monitors chassis G-forces and terrain data over 1,000 times per second - delivering damping adjustments in under 40 milliseconds with zero driver input required. The entire system is managed wirelessly via the IIC iOS app, which also serves as a data logger. Note that this kit requires the CDEV rear coilovers and IIC module for full operation, an iOS device for the app, and ADAS recalibration after install. ICON UCAs with Delta Joint Pro are strongly recommended for lifts above 2.5".