ICON K53031 Stage 1 Suspension System 0-2.5" Lift for 00-06 Tundra & Sequoia

Vehicle Fitment

• 2000-2006 Toyota Tundra (All Trims, 2WD / 4WD)
• 2001-2007 Toyota Sequoia (All Trims, 2WD / 4WD) -- front coilover kit compatible

Fitment Notes

• Front lift: 0-2.5" (coilover height adjustable)
• Rear lift: 0-1.5"
• OEM wheels and tires compatible
• Recommended aftermarket tires: 33" x 11.50"
• Recommended aftermarket wheels: ICON Alloys 17x8.5" (4.75" BS / 0mm), 18x9" or 20x9" (5.00" BS / 0mm)
• 700 lb/in Expedition coil available for heavier equipped vehicles (Application Note #47)
• Bump stop spacer kit available to increase adjustment range (Application Note #111)
• Shocks fully serviceable

Features

• 2.5 VS Internal Reservoir front coilovers -- vehicle-specific valving
• 2.0 VS Non-Reservoir rear shocks -- vehicle-specific valving
• Height adjustable 0-2.5" -- allows larger wheel and tire combinations
• Increased wheel travel over stock -- no change to towing capacity
• 6061 aircraft-grade aluminum CNC machined components
• CAD plated coilover body -- corrosion resistant, 7/8" shaft
• Rear shocks: 5/8" polished chrome shafts
• FK rod end bearings -- extended longevity, minimal deflection
• 100% bolt-on -- no drilling, cutting, or welding required

Specifications

• Part Number: K53031
• Series: Stage 1 Suspension System
• Front Lift Range: 0-2.5"
• Rear Lift Range: 0-1.5"
• Front Shock Type: 2.5 VS Internal Reservoir Coilover
• Rear Shock Type: 2.0 VS Non-Reservoir
• Coilover Shaft: 7/8"
• Rear Shock Shaft: 5/8" polished chrome
• Body Material: 6061 Aircraft-Grade Aluminum (CNC machined)
• Coilover Body Finish: CAD plated
• UPC: 840103416762
• Shipping Weight: 48 lbs.

Included Components

• 1x ICON 2.5 VS IR Front Coilover Kit -- 00-06 Tundra / 01-07 Sequoia (PN 58620, covers both sides)
• 2x ICON 2.0 VS NR Rear Shocks -- 00-06 Tundra 0-1.5" (PN 56504)
• All mounting hardware

Product Description

The ICON K53031 is a Stage 1 suspension system for the 2000-2006 Toyota Tundra, delivering 0-2.5" of front lift and 0-1.5" of rear lift through a complete front and rear shock replacement. The front system uses ICON's 2.5 VS Internal Reservoir coilovers -- vehicle-specific valved twin-tube units with a remote internal reservoir for heat management during extended off-road use. Height is adjusted via the threaded coilover body, allowing the driver to run anywhere from stock ride height to 2.5" of lift without changing spring rates. The rear uses ICON's 2.0 VS Non-Reservoir shocks, also vehicle-specific valved, which balance the truck's damping behavior front to rear and increase wheel travel over the factory units.

All components are CNC machined from 6061 aircraft-grade aluminum with a CAD plated coilover body for corrosion resistance. FK rod end bearings are used throughout for long service life and minimal deflection under load. The system is 100% bolt-on -- no drilling, cutting, or welding required for installation -- and is compatible with OEM wheels and tires as well as ICON Alloys wheels in 17", 18", and 20" fitments. Towing capacity is not affected. A 700 lb/in Expedition coil is available separately for heavily optioned trucks. All shocks are fully serviceable. The front coilover kit (PN 58620) is also compatible with the 2001-2007 Toyota Sequoia.