Hellwig 7768 Rear Sway Bar for 2014-2021 Ram ProMaster 1500/2500/3500 1-1/8in

Vehicle Fitment

• 2014-2021 Ram ProMaster 1500 (All Trim Levels, All Wheelbases, All Engines)
• 2014-2021 Ram ProMaster 2500 (All Trim Levels, All Wheelbases, All Engines)
• 2014-2021 Ram ProMaster 3500 (All Trim Levels, All Wheelbases, All Engines)

Fitment Notes

• Fits all Ram ProMaster 1500, 2500, and 3500 full-size van configurations across all wheelbases (Standard, Extended, Super Extended) and all roof heights (Low, High).
• Does NOT fit the Ram ProMaster City - this bar is specifically engineered for the full-size ProMaster 1500/2500/3500 platform only.
• Designed for stock ride height vehicles.
• The full-size Ram ProMaster is a front-wheel drive platform - this bar fits all standard FWD configurations.
• Hellwig recommends pairing with a front sway bar upgrade for a complete front-to-rear handling package on this platform.

Features

• Purpose-built 3-position adjustable rear sway bar engineered specifically for the 2014-2021 Ram ProMaster full-size van platform - improves the rear lateral stiffness and body roll resistance significantly over the factory setup.
• 1-1/8" (1.125 in. / 28.58 mm) diameter solid, heat-treated 4140 chromoly spring steel - a substantial step up that delivers meaningful improvement in rear stability for loaded vans, passenger configurations, and towing applications.
• 3-position adjustable rate design allows stiffness tuning to match the load, use case, and driving conditions - from empty cargo van commuting to maximum loaded commercial hauling.
• Reduces the rear body sway, cornering lean, and crosswind sensitivity that are characteristic of high-profile full-size van platforms operating at or near capacity.
• Keeps weight more evenly distributed across all four tires during cornering for improved traction and driver confidence.
• High-durometer polyurethane bushings included for superior roll resistance, reduced noise and vibration, and long service life.
• Heat-formed as a single piece from 4140 chromoly steel - more dimensionally consistent at the bends than cold-bent alternatives.
• Gray/silver hammertone powdercoated finish for corrosion resistance in commercial and weather-exposed operating environments.
• Quick bolt-on installation using factory mounting locations - all hardware included.
• ISO 9001:2015 certified manufacturing at Hellwig's Visalia, California facility. Made in the USA. Backed by a Limited Lifetime Warranty.

Specifications

• Part Number: 7768
• Bar Diameter: 1-1/8" (1.125 in. / 28.58 mm)
• Bar Material: Solid, heat-treated 4140 chromoly spring steel
• Finish: Gray/Silver Hammertone Powdercoated
• Position: Rear
• Rate Type: 3-position adjustable
• Drivetrain: FWD (standard for all ProMaster 1500/2500/3500)
• Ride Height: Stock height only
• UPC: 745662077686
• Warranty: Limited Lifetime

Included Components

• 1x Hellwig 7768 Rear Sway Bar (1-1/8" diameter, chromoly, gray/silver hammertone powdercoated)
• 1x Set of high-durometer polyurethane bushings
• 1x Complete mounting hardware kit
• 1x Installation instruction sheet

Product Description

The Hellwig 7768 Rear Sway Bar is a direct-fit, 3-position adjustable suspension upgrade engineered for the 2014-2021 Ram ProMaster 1500, 2500, and 3500 full-size vans. The ProMaster's tall, high-profile van body combined with its front-wheel-drive platform creates a naturally elevated center of gravity that amplifies body roll and rear end sway - particularly when the van is loaded with cargo, configured with high-top conversions, or used in passenger shuttle or ambulance applications where rear stability is essential. The factory rear sway bar on these vans is insufficient for the demands of heavy commercial use, and the Hellwig 7768 addresses this directly with a solid 1-1/8" heat-treated 4140 chromoly bar with 3-position rate adjustment.

The 3-position adjustable design is especially valuable on the ProMaster platform, where payload can vary dramatically between trips - from completely empty to maximum GVWR loading. Owners can tune the bar's stiffness to match their most common operating conditions, selecting the firmest setting for maximum-load commercial hauling, the center position for mixed use, or the softer setting for lighter loads where ride quality is a priority. All mounting hardware is included and the installation is fully bolt-on. The bar is designed for stock ride height configurations across all ProMaster 1500, 2500, and 3500 variants regardless of wheelbase or roof height.

Fitment covers the full 2014-2021 production run of the Ram ProMaster in all three payload class configurations - 1500, 2500, and 3500 - across all available wheelbases and roof heights. This bar is not compatible with the Ram ProMaster City, which is a smaller van on a different platform. Built at Hellwig's ISO 9001:2015 certified Visalia, California facility and backed by a Limited Lifetime Warranty, the 7768 is a proven American-made upgrade for one of the most commercially intensive van platforms in the North American market.