Hellwig 7741 Front Sway Bar for 2014-2026 Ram 2500 4WD Coil Spring 0-6in Lift

Vehicle Fitment

• 2014-2026 Ram 2500 (All Trims, 4WD, Rear Coil Spring Models, Stock Height to 6" Lift, All Engines)

Fitment Notes

• Fits 4WD configurations only - does not fit 2WD Ram 2500 models.
• Fits Ram 2500 models equipped with rear coil springs - this is the standard rear suspension configuration on the Ram 2500 pickup.
• Compatible with stock ride height through 6" of lift, making this bar equally suited for stock-height trucks, leveled builds, and lifted applications.
• This bar reuses the factory front end links - end links are NOT included in the kit.
• Fits all available Ram 2500 engine options including the 6.4L HEMI V8 and 6.7L Cummins Turbo Diesel I6.
• Designed for use with the factory exhaust system.
• Hellwig recommends pairing with the Hellwig 7738 rear sway bar for a complete front-to-rear handling upgrade on this platform.

Features

• Purpose-built front sway bar engineered specifically for the 2014-2026 Ram 2500 4WD - designed to deliver a meaningful improvement in front-end roll stiffness over the factory bar.
• 1-3/8" (1.375 in.) diameter solid, heat-treated 4140 chromoly spring steel - significantly larger than stock for improved front lateral stiffness and cornering control.
• Wide lift compatibility (stock to 6") makes this bar ideal for a broad range of Ram 2500 builds, from unmodified daily drivers to lifted tow rigs and off-road setups.
• Reduces front body lean and understeer during cornering, keeping weight more evenly distributed across all four tires for improved traction and handling confidence.
• Reuses factory front end links for a clean, OEM-integrated installation with no aftermarket link hardware required.
• High-durometer polyurethane bushings included for superior roll resistance, reduced noise and vibration, and longer service life than rubber.
• Gray hammertone powdercoated finish for long-term corrosion resistance.
• Heat-formed as a single piece from 4140 chromoly steel - more dimensionally consistent at the bends versus cold-bent aftermarket alternatives.
• Quick bolt-on installation using factory mounting locations - all mounting hardware included.
• ISO 9001:2015 certified manufacturing at Hellwig's Visalia, California facility. Made in the USA. Backed by a Limited Lifetime Warranty.

Specifications

• Part Number: 7741
• Bar Diameter: 1-3/8" (1.375 in.)
• Bar Material: Solid, heat-treated 4140 chromoly spring steel
• Finish: Gray Hammertone Powdercoated
• Position: Front
• Rate Type: Fixed (non-adjustable)
• Drivetrain: 4WD only
• Suspension Requirement: Rear coil spring models
• Lift Compatibility: Stock height to 6" lift
• End Links: Reuses factory end links (not included)
• Shipping Weight: 33 lbs.
• Shipping Dimensions: 54 in. L x 21 in. W x 2 in. H
• UPC: 745662077419
• Warranty: Limited Lifetime

Included Components

• 1x Hellwig 7741 Front Sway Bar (1-3/8" diameter, chromoly, gray hammertone powdercoated)
• 1x Set of high-durometer polyurethane bushings
• 1x Complete mounting hardware kit
• 1x Installation instruction sheet

Product Description

The Hellwig 7741 Front Sway Bar is a direct-fit handling upgrade engineered specifically for the 2014-2026 Ram 2500 equipped with 4WD and rear coil springs. The factory front sway bar on the Ram 2500 is sized to balance ride compliance with general-purpose handling but falls short under the demands of towing, heavy hauling, or spirited driving where front body lean becomes noticeable. The Hellwig 7741 replaces the stock bar with a solid 1-3/8" heat-treated 4140 chromoly unit - a meaningful diameter step up that delivers a significantly stiffer front roll response, reduced understeer, and a much more planted and confidence-inspiring front end. Owners towing fifth wheels or gooseneck trailers will notice improved cornering stability and less front-end lean during loaded highway driving.

One of the most practical strengths of the 7741 is its broad lift compatibility. With a design that accommodates stock ride height through 6" of lift, this bar works equally well on unmodified Ram 2500s, leveled trucks, and moderately lifted builds. The bar reuses the factory front end links in all applications, keeping the installation straightforward and OEM-clean. All mounting hardware and polyurethane bushings are included, and the installation is fully bolt-on using factory front axle mounting locations. The fixed-rate design is precision-optimized for the Ram 2500 4WD front suspension geometry across the entire 2014-2026 production run.

Fitment covers all 2014-2026 Ram 2500 4WD models across all trim levels and both the 6.4L HEMI and 6.7L Cummins engine options on rear coil spring configurations. Paired with the Hellwig 7738 rear sway bar, the 7741 completes a front-to-rear handling transformation on this platform. Built at Hellwig's ISO 9001:2015 certified Visalia, California facility and backed by a Limited Lifetime Warranty, the 7741 is an American-made upgrade that delivers real-world handling improvements on one of the most capable and versatile heavy-duty trucks in production.