Hellwig 7719 Front Sway Bar for 2005-2023 Toyota Tacoma 4WD/Prerunner Stock-6in

Vehicle Fitment

• 2005-2015 Toyota Tacoma (4WD, All Trims, Stock Height to 6" Lift, All Engines)
• 2005-2015 Toyota Tacoma PreRunner (2WD, All Trims, Stock Height to 6" Lift, All Engines)
• 2016-2023 Toyota Tacoma (2WD/4WD, All Trims, Stock Height to 6" Lift, All Engines)

Fitment Notes

• For 2005-2015 model years: fits 4WD configurations and 2WD PreRunner configurations only - does NOT fit standard 2WD (non-PreRunner) Tacoma models from these years.
• For 2016-2023 model years: fits all 2WD and 4WD configurations including SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, and Limited trims.
• Compatible with stock ride height through 6" of front lift across all supported model years.
• This bar reuses the factory front end links - end links are NOT included in the kit.
• Designed for use with the factory exhaust system.
• Hellwig recommends pairing with the Hellwig 7744 rear sway bar for a complete front-to-rear handling upgrade on this platform.

Features

• Purpose-built front sway bar engineered specifically for the second- and third-generation Toyota Tacoma - significantly larger diameter than stock for meaningful front roll stiffness improvement.
• 1-3/8" (34.93mm) diameter solid, heat-treated 4140 chromoly spring steel - delivers a major increase in lateral stiffness over the factory bar for improved front-end control during cornering and loaded driving.
• Compatible with lifts up to 6", making it ideal for stock-height daily drivers, tow rigs, and lifted off-road builds alike.
• Reduces front body roll and understeer, keeping weight more evenly distributed across all four tires during cornering and lane changes.
• Reuses factory front end links for a clean, OEM-integrated installation - no aftermarket link hardware required.
• High-durometer polyurethane bushings included for superior roll resistance, reduced noise and vibration, and longer service life than rubber.
• Black hammertone powdercoated finish for a distinctive appearance and long-term corrosion resistance.
• Heat-formed as a single piece from 4140 chromoly steel - structurally consistent at the bends versus cold-bent alternatives.
• Quick bolt-on installation using factory mounting locations - all hardware included.
• ISO 9001:2015 certified manufacturing at Hellwig's Visalia, California facility. Made in the USA. Backed by a Limited Lifetime Warranty.

Specifications

• Part Number: 7719
• Bar Diameter: 1-3/8" (1.375 in. / 34.93 mm)
• Bar Material: Solid, heat-treated 4140 chromoly spring steel
• Finish: Black Hammertone Powdercoated
• Position: Front
• Rate Type: Fixed (non-adjustable)
• Lift Compatibility: Stock height to 6" front lift
• End Links: Reuses factory end links (not included)
• Shipping Weight: 36 lbs.
• Shipping Dimensions: 53 in. L x 18 in. W x 8 in. H
• UPC: 745662077198
• Warranty: Limited Lifetime

Included Components

• 1x Hellwig 7719 Front Sway Bar (1-3/8" diameter, chromoly, black hammertone powdercoated)
• 1x Set of high-durometer polyurethane bushings
• 1x Complete mounting hardware kit
• 1x Installation instruction sheet

Product Description

The Hellwig 7719 Front Sway Bar is a direct-fit handling upgrade engineered for the 2005-2023 Toyota Tacoma, spanning both the second-generation (2005-2015) and third-generation (2016-2023) platforms. The factory front sway bar on these trucks is sized for a balance of ride compliance and general handling, but it falls short under the demands of spirited driving, loaded towing, or lifted builds where front body roll becomes more pronounced. The Hellwig 7719 replaces the stock bar with a solid 1-3/8" (34.93mm) heat-treated 4140 chromoly unit finished in a distinctive black hammertone powdercoat - a meaningful diameter upgrade that delivers noticeably stiffer front lateral resistance, improved cornering behavior, reduced understeer, and a more planted front end both on road and during trail driving.

Lift compatibility extends to 6" of front lift, making the 7719 a strong choice not just for stock-height trucks but for those running leveling kits, body lifts, or performance suspension systems. For 2005-2015 model years, fitment is specific to 4WD and 2WD PreRunner configurations - the standard 2WD Tacoma uses a different front suspension setup in these years and is not compatible. Starting with the 2016 third-generation redesign, all 2WD and 4WD configurations are supported. The bar reuses the factory front end links in all applications, keeping the installation clean and OEM-integrated.

Coverage spans all trim levels and engine options across the full 2005-2023 Tacoma range, including SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, and Limited trims on the third generation. Paired with the Hellwig 7744 rear sway bar, the 7719 delivers a complete front-to-rear handling upgrade for the Tacoma platform. Built at Hellwig's ISO 9001:2015 certified Visalia, California facility and backed by a Limited Lifetime Warranty, the 7719 is a proven American-made front suspension upgrade for one of the most popular midsize trucks on the market.