Hawk HB663F.557 HPS Rear Brake Pads for Hyundai Genesis Coupe 2010-2016

Vehicle Fitment

• 2010 Hyundai Genesis Coupe 2.0T R-Spec (2.0L Theta II I4 Turbocharged, RWD) - Rear, w/ Brembo Rear Calipers
• 2010 Hyundai Genesis Coupe 2.0T Track (2.0L Theta II I4 Turbocharged, RWD) - Rear, w/ Brembo Rear Calipers
• 2010 Hyundai Genesis Coupe 3.8 Track (3.8L Lambda II V6, RWD) - Rear, w/ Brembo Rear Calipers
• 2011-2014 Hyundai Genesis Coupe 2.0T R-Spec (2.0L Theta II I4 Turbocharged, RWD) - Rear, w/ Brembo Rear Calipers
• 2011-2016 Hyundai Genesis Coupe 3.8 R-Spec (3.8L Lambda II V6, RWD) - Rear, w/ Brembo Rear Calipers
• 2011-2014 Hyundai Genesis Coupe 3.8 Track (3.8L Lambda II V6, RWD) - Rear, w/ Brembo Rear Calipers
• 2012-2016 Hyundai Genesis Coupe 3.8 Ultimate (3.8L Lambda II V6, RWD) - Rear, w/ Brembo Rear Calipers

Fitment Notes

• Position: Rear axle only for all applications listed above.
• FMSI Caliper Reference: D1428.
• Not compatible with carbon ceramic rotors. For use with iron/metal rotors only.
• This pad fits the Brembo rear caliper standard on performance-trim Genesis Coupe models. Not all Genesis Coupe trims are equipped with Brembo rear calipers - base and non-performance trim levels use a different rear caliper and require a different pad. Verify your specific trim and brake configuration before ordering.
• The Genesis Coupe 2.0T uses the 2.0L Theta II turbocharged inline-4 engine. The 3.8 uses the 3.8L Lambda II naturally aspirated V6. Both engine variants listed here share the same Brembo rear caliper (FMSI D1428) and are covered by this pad.
• All Genesis Coupe models listed are rear-wheel drive.
• The first-generation Genesis Coupe (BK1, 2010) and second-generation (BK2, 2011-2016) share the same rear Brembo caliper fitment covered by this pad.
• No electronic wear sensor is included. Hardware is not included.

Features

• HPS (High Performance Street) Ferro-Carbon compound - Hawk's benchmark street performance formula for the Genesis Coupe's Brembo rear caliper, delivering 20-40% more stopping power than OEM replacement rear pads while maintaining the low dust, quiet operation, and rotor-friendly characteristics that make it practical for daily street driving on a rear-wheel-drive performance coupe.
• Effective from cold through spirited use - Operates from ambient temperature through 700°F (optimal: 100-500°F), providing improved rear brake torque from the first application without any warm-up cycle - appropriate for the Genesis Coupe as a daily-driven performance car where rear brakes must perform consistently from cold starts through spirited weekend driving.
• 20-40% more stopping power than OEM - The HPS compound's higher coefficient of friction extracts more performance from the Genesis Coupe's Brembo rear calipers, improving overall braking balance and contributing to shorter stopping distances over standard replacement compounds.
• Fade resistant for spirited driving - Maintains consistent rear brake performance through the sustained heat generated by aggressive street driving, canyon runs, and light autocross use where standard replacement pads on the Genesis Coupe's rear Brembo calipers approach their thermal limits.
• Smooth and predictable rear torque - The HPS compound's progressive engagement supports stable RWD chassis behavior on the Genesis Coupe, allowing confident trail-braking and controlled deceleration without abrupt rear brake engagement that could upset the car's handling balance.
• Gentle on rotors with extended pad and rotor life - The Ferro-Carbon formulation minimizes abrasive rear rotor wear, extending service intervals for both the pads and rear disc surfaces while maintaining performance above OEM replacement compounds.
• Low dust output with near-silent operation - Produces significantly less brake dust than performance race compounds while operating virtually noise-free, preserving the daily-driver character expected of the Genesis Coupe without the noise and wheel contamination of more aggressive compounds.
• 100% asbestos, lead, chromium, cadmium, and antimony free - Manufactured in an ISO-certified facility to strict quality and environmental standards.

Specifications

• Part Number: HB663F.557
• Compound: HPS (High Performance Street)
• Compound Code: F
• Friction Material: Ferro-Carbon
• Pad Thickness: 0.557 in.
• FMSI Caliper Reference: D1428
• Total Operating Temperature Range: 100-700°F
• Optimal Temperature Range: 100-500°F
• Position: Rear
• Caliper Type: OEM Brembo Rear Disc (Hyundai Genesis Coupe performance trims, 2010-2016)
• Electronic Wear Sensor: Not included
• Hardware: Not included
• Rotor Compatibility: Iron/metal rotors only - not compatible with carbon ceramic rotors
• Recommended Use: Performance Street / Daily Driver / Light Autocross
• Sold as: Set

Included Components

• 2x Hawk HPS Rear Brake Pads (HB663F.557)

Product Description

The Hawk HB663F.557 HPS rear brake pads fit the FMSI D1428 Brembo rear caliper of performance-trim Hyundai Genesis Coupe models across the full 2010-2016 production run. Covered applications span the first-generation BK1 (2010) and second-generation BK2 (2011-2016), including the 2.0T turbocharged four-cylinder and 3.8 V6 variants in R-Spec, Track, and Ultimate trims. Base and non-Brembo Genesis Coupe trims use a different rear caliper and are not covered by this fitment - confirm your specific trim and brake configuration before ordering. All covered models are rear-wheel drive.

HPS is the natural rear brake upgrade for Genesis Coupe owners who drive their car on public roads daily and want improved rear stopping performance over OEM replacement pads. The compound delivers 20-40% more rear stopping force from the Brembo caliper, operates from dead cold through 700°F without a warm-up cycle, and maintains fade resistance through the spirited driving that Genesis Coupe owners regularly enjoy. The HPS compound's progressive rear engagement is particularly well-suited to the RWD Genesis Coupe platform, where smooth, controlled rear brake application supports stable handling balance and confident corner entry on both street and light autocross use.

This pad is for the rear axle only. A separate front pad is required for a complete brake upgrade. Compatible with iron and metal rotors only; carbon ceramic brake discs are not supported.