Haltech HT-060400 Reverse Back-Up Camera Kit uC-10 Display Dash 170 Degree IP67

Vehicle Fitment

• Universal Fit - Compatible with any vehicle equipped with a Haltech uC-10 Display Dash. No vehicle-specific restrictions.

Fitment Notes

• Designed exclusively for use with the Haltech uC-10 Digital Dash - not compatible with Haltech iC-7 or any other Haltech display product.
• Requires uC-10 firmware version v2.29.x or later to enable the camera input function. Update uC-10 firmware before installation if on an earlier version.
• Camera connects to the uC-10 via the dedicated camera input - no additional adapters or modules required.
• License plate mounting bracket is included for rear-of-vehicle placement. Double-sided tape and screws also included for alternative mounting configurations.

Features

• CVBS camera with 720 x 480 resolution delivers clear, real-time rear-view imagery directly to the Haltech uC-10 display during reverse maneuvers
• 170-degree wide-angle lens provides maximum rear visibility, covering blind spots across the full width of the vehicle
• IP67-rated camera body with fitted grommet ensures full weatherproofing against water ingress, dust, and debris in all conditions
• Optional on-screen guide lines assist with reversing accuracy by providing visual distance and alignment references on the uC-10 display
• Pre-terminated, labeled, shielded 6m (19 ft) wiring harness simplifies installation and minimizes electrical interference for a clean camera signal
• Complete kit includes all hardware needed for installation - no additional components required beyond the Haltech uC-10 dash
• License plate mounting bracket allows for clean factory-style rear camera positioning without custom fabrication
• Compact camera design suitable for discreet mounting at the rear of any performance or motorsport vehicle

Specifications

• Part Number: HT-060400
• Camera Type: CVBS (Composite Video Broadcast Signal)
• Camera Resolution: 720 x 480
• Viewing Angle: 170 degrees
• IP Rating: IP67 (dustproof and waterproof) with fitted grommet
• Wiring Harness Length: 6m (19 ft) - pre-terminated, labeled, shielded
• Optional Guide Lines: Yes
• Compatible Display: Haltech uC-10 Digital Dash only
• Required Firmware: uC-10 v2.29.x or later
• UPC: 9356450016162

Included Components

• 1x CVBS Reverse/Back-Up Camera (720 x 480, 170°, IP67)
• 1x 6m (19 ft) Pre-Terminated Labeled Shielded Camera Wire Harness
• 1x License Plate Mounting Bracket
• 1x Double-Sided Mounting Tape
• 1x Set of Mounting Screws

Product Description

The Haltech HT-060400 is a complete reverse and back-up camera kit engineered specifically for use with the Haltech uC-10 Digital Dash. It transforms the uC-10 into a fully functional rear-view camera system, displaying a live 720 x 480 CVBS camera feed directly on the dash screen whenever the vehicle is in reverse. With a 170-degree wide-angle lens, the camera provides comprehensive rear visibility across the full width of the vehicle - eliminating blind spots that are unavoidable with mirrors alone. The IP67-rated camera body and fitted grommet ensure full protection against water, dust, and debris, making it equally suited to track use, street driving, and trailered vehicle maneuvering.

Installation is designed to be straightforward. The kit includes a pre-terminated, labeled, and shielded 6m (19 ft) wiring harness that connects the camera to the uC-10's dedicated camera input port, reducing the risk of signal interference and eliminating the need for custom wiring. A license plate mounting bracket is included for clean, factory-style rear positioning, and double-sided mounting tape and screws provide alternative mounting options for setups where a license plate bracket isn't applicable. Optional on-screen guide lines can be enabled through the uC-10 interface to provide visual distance and alignment assistance during reversing.

Compatibility requires uC-10 firmware version v2.29.x or later - the camera input function is not available on earlier firmware versions. Builders should confirm their uC-10 firmware version and update if necessary prior to installation. The HT-060400 is not compatible with any other Haltech display product, including the iC-7 series. Once installed and configured, the system operates automatically - activating the camera view on the uC-10 display when reverse is engaged, then returning to the standard dash layout when the vehicle moves forward.