H&R 54795-2 Sport Lowering Springs for 18-26 VW Atlas/Atlas Cross Sport FWD/AWD

Vehicle Fitment

• 2018-2025 Volkswagen Atlas S (2WD, 2.0T / VR6)
• 2018-2026 Volkswagen Atlas SE (2WD, 2.0T / VR6)
• 2020-2025 Volkswagen Atlas Cross Sport S (2WD, 2.0T)
• 2020-2026 Volkswagen Atlas Cross Sport SE (2WD, 2.0T)
• 2020-2026 Volkswagen Atlas Cross Sport SE 4MOTION (AWD, 2.0T / VR6, incl. R-Line)
• 2020-2026 Volkswagen Atlas Cross Sport SEL 4MOTION (AWD, 2.0T / VR6, incl. R-Line)
• 2020-2026 Volkswagen Atlas Cross Sport SEL Premium 4MOTION (AWD, 2.0T / VR6, incl. R-Line)

Fitment Notes

• Drop heights may vary on vehicles optionally equipped with factory sport suspension or different engine configurations
• Compatible with OEM dampers -- no shock replacement required
• Performance dampers recommended for optimal handling
• Professional installation and alignment recommended after install

Features

• Sport progressive spring rate design
• 54SiCr6 high-tensile spring steel -- 290,000 psi tensile strength
• Shot-peened for extended fatigue life
• Block-set to prevent sag
• Reduces fender-to-wheel gap
• Lowers center of gravity for reduced body roll
• Direct OEM damper compatibility
• 100% tested before shipment
• ISO 9001 certified / TUV approved production facility
• Made in Germany
• Limited lifetime warranty

Specifications

• Front Drop: Approx. -1.6"
• Rear Drop: Approx. -1.5"
• Spring Material: 54SiCr6 high-tensile steel
• Spring Design: Progressive
• Quantity: Set of 4

Included Components

• 2x Front lowering springs
• 2x Rear lowering springs

Product Description

The H&R 54795-2 is a Sport Lowering Spring kit covering the Volkswagen Atlas and Atlas Cross Sport across FWD and select AWD configurations. The Atlas S and SE in 2WD are supported from 2018 through 2025 and 2026 respectively, while the Atlas Cross Sport S and SE in 2WD and all Atlas Cross Sport 4MOTION AWD variants (SE, SEL, SEL Premium, including R-Line) are supported from 2020 through 2025 or 2026 depending on trim. All applications drop approximately 1.6" front and 1.5" rear, closing the factory fender gap and lowering the center of gravity for improved body roll control and a more planted driving character. H&R manufactures all springs from 54SiCr6 high-tensile spring steel rated at 290,000 psi tensile strength, shot-peened to extend fatigue life, block-set to prevent post-install sag, and finished with a blue epoxy powder coat for long-term corrosion resistance. The progressive spring rate design provides firmer support during cornering and spirited driving while remaining compliant enough for daily street use. All springs are 100% load-tested before leaving H&R's ISO 9001 certified and TUV approved facility in Germany. The 54795-2 is a direct bolt-on installation using the vehicle's factory OEM dampers with no shock replacement required. Performance-grade dampers are recommended for optimal results. Drop heights may vary on vehicles optionally equipped with factory sport suspension. Alignment is required after installation. Backed by H&R's limited lifetime warranty.