Goodridge 20036 G-Stop SS Brake Lines for 1992-1996 Honda Prelude S/Si/VTEC FWD

Vehicle Fitment

• 1992-1996 Honda Prelude S (2.2L F22A1 SOHC, FWD)
• 1992-1996 Honda Prelude Si (2.3L H23A1 DOHC, FWD)
• 1992-1994 Honda Prelude Si 4WS (2.3L H23A1 DOHC, FWD)
• 1993-1996 Honda Prelude VTEC (2.2L H22A1 DOHC VTEC, FWD)
• 1995-1996 Honda Prelude SE (2.3L H23A1 DOHC, FWD)

Fitment Notes

• Fits all 4th generation (1992-1996) Honda Prelude trims across all engine variants. All models are Front-Wheel Drive (FWD).
• The Si 4WS model was offered from 1992-1994 only; rear-wheel steering (4WS) is a mechanical system and does not affect brake line fitment.
• The VTEC trim was introduced for the 1993 model year in the US market; it was not offered for 1992.
• The SE (Special Edition) trim was a mid-year introduction for 1995, based on the Si platform.

Features

• PTFE inner liner with stainless steel overbraid eliminates brake hose expansion under pressure.
• Firmer, more responsive pedal feel compared to factory rubber hoses.
• Pressure tested to 3,000 psi for maximum safety and reliability.
• 9-point quality assurance process covering tensile strength and burst pressure.
• Reduces ABS brake pedal chatter during hard stops.
• DOT certified (FMVSS106) and TUV approved for street use.
• Corrosion and abrasion resistant for long-term durability.
• Direct bolt-on fitment using OEM-matched hose ends and brackets.

Specifications

• Hose Construction: PTFE inner core with stainless steel overbraid (-03 PTFE)
• Pressure Rating: 3,000 psi
• Compliance: DOT (FMVSS106), TUV Approved
• Number of Lines: 4 (2 Front, 2 Rear)
• Position: Front and Rear
• Drivetrain: FWD

Included Components

• 2x Front Brake Lines
• 2x Rear Brake Lines
• Banjo Bolts
• Copper Washers
• Adapters
• Line Locators / Brackets

Product Description

The Goodridge 20036 G-Stop Stainless Steel Brake Line Kit is a direct bolt-on replacement for the factory rubber brake hoses on all 1992-1996 Honda Prelude models, covering every 4th generation trim including the S, Si, Si 4WS, VTEC, and SE. Constructed with a PTFE inner liner and stainless steel overbraid, these lines eliminate hose flex under pressure - delivering a firmer, more confidence-inspiring brake pedal across all driving conditions.

The 4-line kit includes all required hardware for a clean installation with no modifications needed. Whether you're preserving a stock Prelude or building a performance street car around the H22A1 VTEC engine, the G-Stop kit is a proven upgrade over OEM rubber hoses and is backed by Goodridge's lifetime guarantee.