Goodridge 4-21155 G-Stop SS 4in Extended Brake Lines Toyota Tacoma 4WD PreRunner

Vehicle Fitment

• 2005-2015 Toyota Tacoma Base, Pre Runner, X-Runner (2.7L I4 / 4.0L V6, 2WD/4WD)
• 2015-2017 Toyota Tacoma TRD Pro (4.0L V6 / 3.5L V6, 4WD)
• 2016-2017 Toyota Tacoma SR, SR5, TRD Sport, TRD Off-Road, Limited (2.7L I4 / 3.5L V6, 2WD/4WD)
• 2018-2019 Toyota Tacoma (all trims, 2.7L I4 / 3.5L V6, 2WD/4WD)

Fitment Notes

• This is the 4-inch extended version of the Goodridge 21155 kit, designed for 2nd and 3rd generation Toyota Tacoma trucks running a suspension lift of approximately 3-4 inches.
• Fits 4WD, PreRunner (2WD with front solid axle/6-lug), and 2WD Tacoma configurations. All use the same brake line routing geometry across these drivetrain variants.
• Extended brake lines are required when a suspension lift increases the axle-to-body distance. Installing stock-length lines on a lifted Tacoma can result in line binding or failure under full suspension travel.
• For stock-height Tacomas, use PN 21155. For 2-inch lifts, use PN 2-21155.

Features

• PTFE inner liner with stainless steel overbraid eliminates brake hose expansion under pressure.
• 4-inch extended length accommodates suspension lifts of approximately 3-4 inches.
• Firmer, more consistent brake pedal feel compared to OEM rubber hoses.
• Pressure tested to 3,000 psi for maximum safety and reliability.
• 9-point quality assurance process covering tensile strength and burst pressure.
• Reduces ABS brake pedal chatter during hard stops.
• DOT certified (FMVSS106) and TUV approved for street and off-road use.
• Corrosion and abrasion resistant stainless steel construction.

Specifications

• Hose Construction: PTFE inner core with stainless steel overbraid (-03 PTFE)
• Extension Length: 4 inches over stock
• Pressure Rating: 3,000 psi
• Compliance: DOT (FMVSS106), TUV Approved
• Number of Lines: 4 (2 Front, 2 Rear)
• Position: Front and Rear
• Drivetrain: 4WD, PreRunner, 2WD

Included Components

• 2x Front Brake Lines (4-inch extended)
• 2x Rear Brake Lines (4-inch extended)
• Banjo Bolts
• Copper Washers
• Adapters
• Line Locators / Brackets

Product Description

The Goodridge 4-21155 G-Stop Extended Stainless Steel Brake Line Kit is engineered for 2005-2019 Toyota Tacoma trucks - 2nd and 3rd generation - running a suspension lift of approximately 3-4 inches across 4WD, PreRunner, and 2WD configurations. When a lift raises the body relative to the axle, stock-length brake lines can bind or overstretch during full suspension compression or droop. These 4-inch extended lines restore proper slack and safe routing while delivering a firmer, more precise pedal than factory rubber hoses.

Built with a PTFE inner liner and stainless steel overbraid, the kit is a direct replacement for your OEM rubber lines with all required hardware included. For stock-height Tacomas, use PN 21155. For 2-inch lifts, use PN 2-21155. Backed by Goodridge's lifetime guarantee.