Go Rhino 69400080SPC RB20 Slim Running Boards 80in Textured Black Boards Only

Vehicle Fitment

• Semi-universal fitment - the 69400080SPC boards are compatible with a wide range of trucks, SUVs, and pickups when paired with the appropriate vehicle-specific mounting bracket set (sold separately). The 80-inch length suits extended cab and crew cab applications across a broad range of makes and models. Complete kits pairing these boards with vehicle-specific brackets are available under separate application-specific part numbers for vehicles including the Ford Ranger, Toyota Tacoma, Toyota Tundra, GMC Canyon, Chevrolet Colorado, RAM 1500, Ford F-150 Super Cab, and others. Verify board length and bracket compatibility for your specific vehicle before ordering.

Fitment Notes

• This part number is BOARDS ONLY - vehicle-specific mounting brackets are NOT included and must be purchased separately for a complete installation.
• Complete kits combining these boards with vehicle-specific mounting bracket sets are available under a broad range of application-specific part numbers. Buyers should select the complete kit part number for their vehicle if brackets are needed.
• Board length is 80 inches - this length is matched to extended cab and crew cab applications on mid-size and full-size trucks. The RB20 Slim series is also available in 73-inch (69400073SPC) and 87-inch (69400087SPC) lengths for other cab configurations and applications.
• No drilling required on most vehicles when paired with the appropriate vehicle-specific mounting bracket kit.
• This is the Textured Black Powder Coat (SPC) finish version. A Protective Bedliner Coating version is available in the RB20 Slim series under an ST-suffix part number for this length.

Features

• RB20 Slim profile delivers the Raptor-inspired bullet-stamped louvered design of the standard RB20 in a slimmer, 5.5-inch-wide format at the widest point - compared to the 7.5-inch width of the standard RB20 - tapering toward the rear to sit tighter against the vehicle's rocker panel for increased ground clearance and a lower, more streamlined appearance suited to off-road and lifted vehicle builds.
• 80-inch board length provides full-length cab coverage for extended cab and crew cab truck, mid-size pickup, and SUV applications, with the step surface running continuously from the front door opening to the rear.
• Bullet-stamped louvered step design features angled perforations pressed across the full board surface - actively channeling water, mud, and snow downward through the openings rather than pooling on the step surface, maintaining traction and reducing the risk of slipping in all weather conditions.
• Constructed from 16-gauge zinc-coated galvanized steel - providing heavy-duty structural strength combined with a base layer of corrosion resistance built into the steel itself before the powder coat finish is applied, for multi-layer protection against road salt, moisture, rock impacts, and abrasion.
• 5.5-inch slim profile mounts high and tight against the rocker panel, delivering additional ground clearance compared to wider running board designs - an important benefit for off-road builds, lifted trucks, and mid-size pickups where underbody clearance directly affects off-road performance and step-to-terrain contact risk.
• Textured black powder coat finish provides corrosion, impact, and abrasion resistance and is backed by a 5-year finish warranty.
• Protects the vehicle's lower rocker panels and body from road debris, gravel, and trail obstacles along the full 80-inch board length.
• Available as boards only (this part number) or as complete kits with vehicle-specific brackets under application-specific part numbers for a broad range of vehicles.
• Backed by a Limited Lifetime warranty on materials and construction and a 5-year warranty on the textured black finish.
• Manufactured in North America.

Specifications

• Part Number: 69400080SPC
• Brand: Go Rhino
• Series: RB20 Slim
• Type: Running Boards - Boards Only (no brackets)
• Board Length: 80 inches
• Board Width: 5.5 inches at widest point (tapers toward rear)
• Step Design: Bullet-stamped louvered perforations; full cab-length
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured black powder coat
• Brackets: NOT included (vehicle-specific brackets sold separately)
• Installation: No-drill bolt-on (most applications, with bracket kit)
• Fitment: Semi-universal (boards only; vehicle-specific brackets required)
• Country of Manufacture: North America
• Warranty: Limited Lifetime (materials and construction); 5-year (textured black finish)
• Sold: As a pair (driver and passenger side)

Included Components

• 2x Go Rhino RB20 Slim Running Boards - 80 inches, Textured Black (driver and passenger side)

Product Description

The Go Rhino 69400080SPC is a pair of RB20 Slim running boards in 80-inch length with a textured black powder coat finish - boards only, no mounting brackets. The RB20 Slim takes the Raptor-inspired bullet-stamped louvered design of the standard RB20 and narrows the step width to 5.5 inches at the widest point (tapering toward the rear), compared to 7.5 inches for the standard RB20. That slimmer profile sits tighter against the rocker panel, increasing ground clearance under the board without eliminating a practical, full-length cab-length stepping surface. For off-road trucks, lifted mid-size pickups, and applications where underbody clearance is actively managed, the RB20 Slim's tucked-in geometry reduces the risk of the step contacting terrain obstacles that would catch a wider board.

The 80-inch length is Go Rhino's mid-range option in the RB20 Slim series - positioned between the 73-inch boards matched to compact 4-door applications (Jeep Wrangler JL, Ford Bronco) and the 87-inch boards suited to full-size crew cab trucks. At 80 inches, these boards cover the full cab span of extended cab and crew cab mid-size and full-size truck applications including the Ford Ranger, Toyota Tacoma, Toyota Tundra, GMC Canyon, and Chevrolet Colorado, among others. The boards are a component of 13 confirmed complete kit part numbers spanning a broad range of truck and SUV applications - buyers who need boards and brackets together should select the complete kit part number specific to their vehicle.

The bullet-stamped louvered step surface channels water, mud, and snow through the angled perforations rather than allowing it to pool on top of the board, maintaining grip in the wet and muddy conditions that off-road-capable trucks routinely encounter. Constructed from 16-gauge zinc-coated galvanized steel with a textured black powder coat finish applied over the galvanized base, the boards provide multi-layer corrosion protection. Backed by a Limited Lifetime structural warranty and a 5-year warranty on the textured black powder coat finish. Manufactured in North America. Sold as a pair.