Go Rhino D10087T Dominator D1 Side Steps 87in Textured Black Boards Only

Vehicle Fitment

• Semi-universal fitment - the D10087T is the 87-inch board and is a component of more than 11 vehicle-specific complete kits covering a broad range of crew cab full-size trucks from RAM, Chevrolet, GMC, Ford, Toyota, Nissan, and Dodge (1999-2024). Representative applications include the RAM 1500/2500/3500 Crew Cab, Chevrolet Silverado Crew Cab, GMC Sierra Crew Cab, Ford F-150/F-250/F-350 Crew Cab, Toyota Tundra/Tacoma, and Nissan Titan in crew cab configurations. Buyers should select the complete kit part number for their specific vehicle to receive the correct bracket set, or purchase these boards separately if they already own the appropriate vehicle-specific bracket kit.

Fitment Notes

• This part number is BOARDS ONLY - vehicle-specific mounting brackets are NOT included and must be purchased separately for a complete installation. Buyers should reference the complete kit part number for their specific year, make, model, and cab configuration (e.g., D14052T, D14053T, D14155T, D14180T, D14205T, D14306T, D14354T, D14415T, D14416T, D14436T, D14516T, and others).
• The 87-inch board length is the longest available in the Dominator D1 series and is matched to crew cab full-size truck applications. The 80-inch board (D10080T) covers extended cab configurations on most platforms.
• Installation uses OEM step mount locations wherever possible - minimizing or eliminating drilling requirements when paired with the appropriate vehicle-specific bracket kit.
• Designed for lifted trucks and vehicles with oversize tires - the drop-down step geometry positions the step at a height accessible from ground level on elevated builds where a flush-mounted step surface would be impractically high.

Features

• Dominator D1 slider design combines the rocker panel protection of a full-length rock slider with the step access of an integrated drop-down running board - the steel tube slider body runs at rocker panel height along the full 87-inch cab length, shielding the vehicle's lower rocker panel from rock impacts, trail obstacles, debris, and brush that cause dent and corrosion damage to unprotected rockers on lifted full-size trucks.
• Full-length drop-down step integrated into the D1 body - the step platform drops below the slider tube profile to position the stepping surface closer to ground level, making entry and exit significantly easier on lifted crew cab full-size trucks with oversize tires where the cab floor height is substantially elevated above stock.
• 6-inch wide step area with raised hex-pattern mesh stepping surface provides a wide, stable platform with aggressive multi-directional no-slip grip - the mesh openings drain water, mud, and snow through the step surface rather than allowing accumulation, maintaining traction in the wet and muddy conditions that lifted truck owners encounter on trail, farm, and construction applications.
• Mild steel tubing construction provides the structural rigidity to absorb rocker panel impacts from trail obstacles without deforming the slider body - built for the repeated contact forces that off-road and work-site driving subjects the vehicle's lower body to over sustained use.
• Cab-length design runs the full 87-inch span of the vehicle's door openings on each side, providing simultaneous rocker panel protection and a stepping surface continuously from the front door opening to the rear - covering all four door positions on a crew cab without interruption.
• OEM-location mounting uses factory step mount attachment points wherever possible - minimizing drilling requirements and leaving the vehicle body unmodified in most applications.
• Ideal for both daily-driven work trucks and dedicated off-road rigs - the D1's dual function as a rocker panel slider and drop-down step suits the full spectrum of lifted truck owners who need reliable step access and lower body protection in a single integrated unit.
• Textured black powder coat finish provides corrosion, abrasion, and impact resistance appropriate for sustained outdoor, trail, and jobsite use.
• Manufactured in North America. Backed by a Limited Lifetime warranty on materials and construction and a 5-year warranty on the textured black finish.

Specifications

• Part Number: D10087T
• Brand: Go Rhino
• Series: Dominator Xtreme D1
• Type: Side Steps / Rock Slider - Boards Only (no brackets)
• Board Length: 87 inches
• Step Width: 6 inches
• Step Surface: Raised hex-pattern mesh (no-slip; water and debris drainage)
• Material: Mild steel (powder-coated steel tubing)
• Finish: Textured black powder coat
• Brackets: NOT included (vehicle-specific brackets sold separately)
• Installation: No drilling required (most applications, using OEM mount locations with bracket kit)
• UPC: 887753621382
• Weight: 74.0 lbs
• Package Dimensions: 90" L x 10" W x 9" H
• Country of Manufacture: North America
• Warranty: Limited Lifetime (materials and construction); 5-year (textured black finish)
• Sold: As a pair (driver and passenger side)

Included Components

• 2x Go Rhino Dominator Xtreme D1 Side Step Boards - 87 inches, Textured Black (driver and passenger side)

Product Description

The Go Rhino D10087T is a pair of Dominator Xtreme D1 side step boards in 87-inch length with a textured black powder coat finish - boards only, no mounting brackets. The D1 is Go Rhino's dual-function side step and rock slider, combining the rocker panel protection of a full-length slider with the step access of an integrated drop-down running board. The steel tube slider body runs at rocker panel height to absorb rock strikes, trail obstacles, and debris impacts that would damage an unprotected lower body, while the drop-down step platform positions the step surface at a height accessible from ground level on lifted trucks running oversize tires.

The 87-inch board length is the longest available in the Dominator D1 series and is the crew cab full-size truck configuration - matched to the longer door span and rocker panel length of crew cab RAM 1500/2500/3500, Chevrolet Silverado, GMC Sierra, Ford F-150/F-250/F-350, Toyota Tundra, Toyota Tacoma, and Nissan Titan applications in crew cab body styles, spanning 1999 through 2024. The D10087T is a component of more than 11 vehicle-specific complete kit part numbers, each pairing these boards with the correct vehicle-specific bracket set for a specific truck application. The 80-inch D10080T serves extended cab configurations on most platforms where the 87-inch board would be too long.

The 6-inch wide raised hex-pattern mesh step surface provides aggressive multi-directional grip in wet, muddy, and icy conditions, with mesh openings that drain water and debris through the step surface rather than allowing pooling. Buyers should select the complete kit part number for their vehicle to receive both the boards and the correct bracket set, or purchase these boards separately if they already own a compatible bracket kit. Manufactured in North America. Backed by a Limited Lifetime structural warranty and a 5-year warranty on the textured black finish. UPC: 887753621382. Weight: 74 lbs. Package dimensions: 90" L x 10" W x 9" H. Sold as a pair.