Go Rhino D10073T Dominator D1 Side Steps 73in Textured Black Boards Only

Vehicle Fitment

• 2007-2018 Jeep Wrangler JK (4-Door Unlimited)
• 2018-2024 Jeep Wrangler JL (4-Door Unlimited, JLU)
• 2021-2024 Ford Bronco (4-Door - excludes Bronco Sport)

Fitment Notes

• This part number is BOARDS ONLY - vehicle-specific mounting brackets are NOT included and must be purchased separately for a complete installation. Complete kits pairing these boards with vehicle-specific brackets are available under separate part numbers, including D14129T (2021+ Ford Bronco 4-Door), D14506T (2018-2026 Jeep Wrangler JL 4-Door), and D14432T / D14439T / D14505T for Jeep Wrangler JK 4-Door configurations.
• Fits 4-Door configurations only. The 2-Door Jeep Wrangler and 2-Door Ford Bronco require a shorter board length - see D10057T for the 2-Door Bronco application.
• The 73-inch board length is matched to the rocker panel and door span of 4-door Jeep Wrangler and Ford Bronco 4-Door bodies. Verify this length is appropriate for your specific vehicle before ordering.
• Installation uses OEM step mount and rock rail attachment locations wherever possible - minimizing or eliminating drilling requirements when paired with the appropriate vehicle-specific bracket kit.
• Designed for lifted vehicles and rigs with oversize tires - the drop-down step geometry positions the step at an accessible height from ground level on elevated builds.

Features

• Dominator D1 slider design combines the rocker panel protection of a full-length rock slider with the step access of a drop-down running board - the steel tube slider body runs at rocker panel height along the full 73-inch cab length, shielding the vehicle's lower rocker panel from rock strikes, trail obstacles, brush impact, and road debris that cause dent and corrosion damage to unprotected rockers on off-road-capable vehicles.
• Full-length drop-down step integrated into the D1 body - the step platform drops below the slider tube profile to position the stepping surface closer to ground level, making entry and exit significantly easier on lifted Wranglers, Broncos, and other 4x4 builds running oversize tires where the cab floor height is substantially elevated above stock.
• 6-inch wide step area with raised hex-pattern mesh stepping surface provides a wide, stable platform with aggressive multi-directional no-slip grip - the mesh openings simultaneously drain water, mud, and snow through the step rather than allowing accumulation on the step surface, maintaining traction in the wet and muddy trail conditions that Jeep and Bronco owners routinely encounter.
• Mild steel tubing construction provides the structural rigidity to absorb rocker panel impacts from rocks, stumps, and trail obstacles without deforming the slider body - built for the repeated contact forces that dedicated off-road trail driving subjects the lower body to.
• Cab-length design runs the full 73-inch span of the vehicle's door openings on each side, providing simultaneous rocker panel protection and a stepping surface across the entire side of the vehicle.
• OEM-location mounting uses factory step mount and rock rail attachment points wherever possible - minimizing drilling requirements and leaving vehicle body modifications to a minimum in most applications.
• Full-length outer rub rail runs the length of the slider body - adding an additional layer of protection at the outermost edge of the step profile where trail contact most commonly occurs, and providing a visible scuff surface that directs obstacles away from the vehicle's rocker panel.
• Textured black powder coat finish provides corrosion, abrasion, and impact resistance appropriate for sustained off-road and trail use.
• Manufactured in North America. Backed by a Limited Lifetime warranty on materials and construction and a 5-year warranty on the textured black finish.

Specifications

• Part Number: D10073T
• Brand: Go Rhino
• Series: Dominator Xtreme D1
• Type: Side Steps / Rock Slider - Boards Only (no brackets)
• Board Length: 73 inches
• Step Width: 6 inches
• Step Surface: Raised hex-pattern mesh (no-slip; water and debris drainage)
• Material: Mild steel (powder-coated steel tubing)
• Finish: Textured black powder coat
• Brackets: NOT included (vehicle-specific brackets sold separately)
• Complete Kits: D14129T (Ford Bronco 4-Door 2021+); D14506T (Jeep Wrangler JL 4-Door 2018+); D14432T / D14439T / D14505T (Jeep Wrangler JK 4-Door)
• Installation: No drilling required (most applications, using OEM mount locations with bracket kit)
• UPC: 887753621405
• Weight: 58.0 lbs
• Country of Manufacture: North America
• Warranty: Limited Lifetime (materials and construction); 5-year (textured black finish)
• Sold: As a pair (driver and passenger side)

Included Components

• 2x Go Rhino Dominator Xtreme D1 Side Step Boards - 73 inches, Textured Black (driver and passenger side)

Product Description

The Go Rhino D10073T is a pair of Dominator Xtreme D1 side step boards in 73-inch length with a textured black powder coat finish - boards only, no mounting brackets. The D1 is Go Rhino's dual-function side step and rock slider, combining the rocker panel protection of a full-length rock slider with the step access of an integrated drop-down running board. The steel tube slider body runs at rocker panel height to absorb rock strikes, brush contact, and trail impacts that would dent and corrode an unprotected rocker panel, while the drop-down step platform positions the step surface at a height accessible from ground level on lifted vehicles and builds with oversize tires.

The 73-inch board length is matched to the rocker panel span of 4-door Jeep Wrangler and Ford Bronco 4-Door body configurations - specifically the Jeep Wrangler JK 4-Door (2007-2018), Jeep Wrangler JLU 4-Door (2018-2024), and Ford Bronco 4-Door (2021-2024, excluding Bronco Sport). These are the vehicles where the D1's combination of rocker protection and drop-down step access has the most relevance - off-road-capable 4-door platforms that are frequently lifted, equipped with oversize tires, and driven on trails where unprotected rocker panels are vulnerable to contact damage. The 6-inch wide raised hex-pattern mesh step surface maintains grip in wet and muddy conditions while draining water and debris through the openings rather than allowing pooling.

The D10073T is sold as boards only - vehicle-specific mounting brackets must be purchased separately. Complete kits that bundle these boards with the correct bracket set include D14129T (Ford Bronco 4-Door 2021+), D14506T (Jeep Wrangler JL 4-Door 2018+), and D14432T, D14439T, and D14505T for Jeep Wrangler JK 4-Door configurations. 2-Door Wrangler and 2-Door Bronco applications use a shorter board length. Manufactured in North America. Backed by a Limited Lifetime structural warranty and a 5-year warranty on the textured black finish. Weight: 58 lbs. Sold as a pair.