Go Rhino 731300T XE Hood Hinge Light Mount 30in Single Row Wrangler JL Gladiator

Vehicle Fitment

• 2018-2024 Jeep Wrangler JL (2-Door)
• 2018-2024 Jeep Wrangler JLU (4-Door Unlimited)
• 2020-2024 Jeep Gladiator JT

Fitment Notes

• Excludes the Jeep Wrangler Rubicon 392 - the 392's unique hood and hinge geometry is not compatible with this mount.
• Excludes the Jeep Gladiator Mojave Edition - the Mojave's front-end hood structure differs from the standard JT configuration at the hinge mount points.
• This mount is designed for 30-inch single row LED light bars only - it is not compatible with dual row bars, wider single row bars, or cube light pods. Verify your light bar is a 30-inch single row configuration before ordering.
• The mount straddles over the hood and does not interfere with normal hood opening and closing operation.
• LED light bar is NOT included - mount hardware only.

Features

• Hood hinge mounting position places the 30-inch single row LED light bar at the front of the Jeep's hood, forward of the windshield - providing a forward-facing light beam that illuminates the trail ahead without requiring roof or windshield frame mounting that can interfere with soft top or hard top compatibility.
• Low-profile bracket design keeps the mounted light bar below the driver's forward sightline through the windshield - the bar sits in a position where it does not obstruct the driver's visibility during normal operation or trail driving.
• Mounts directly to the factory hood hinge bolt locations on the JL/JLU and Gladiator JT - no drilling, cutting, or body modification required. Factory bolts are removed, the mount brackets are positioned at the hinge, and the factory hardware is reinstalled through the bracket to secure the assembly.
• Rubber gaskets are included and installed between the mount brackets and the hood surface - protecting the factory hood finish from metal-on-metal contact, preventing paint chipping and corrosion at the contact points, and absorbing vibration between the mount and the hood panel.
• Mild steel bracket construction, zinc plated at the base material level and finished with a textured black powder coat, provides corrosion resistance appropriate for exterior trail and off-road use including water, mud, and UV exposure.
• Textured black powder coat finish coordinates with Go Rhino's full JL/JT accessory lineup and resists abrasion and corrosion in sustained outdoor use.
• Manufactured in North America. Backed by a Limited Lifetime warranty on materials and construction and a 5-year warranty on the textured black finish.

Specifications

• Part Number: 731300T
• Brand: Go Rhino
• Series: XE
• Type: Hood Hinge Light Mount - for 30-inch single row LED light bar
• Compatible Light Bar Size: 30-inch single row (light bar not included)
• Material: Mild steel (zinc plated base)
• Finish: Textured black powder coat
• Mounting: Factory hood hinge bolt locations - no drilling required
• Hood Interference: None - straddles hood; does not affect hood operation
• Rubber Gaskets: Included
• Installation: No drilling or cutting; approximately 30 minutes
• LED Light Bar: NOT included
• GTIN: 887753502506
• Country of Manufacture: North America
• Warranty: Limited Lifetime (materials and construction); 5-year (textured black finish)

Included Components

• 2x Go Rhino XE Hood Hinge Light Mount Brackets - Textured Black (driver and passenger side)
• Rubber gaskets (hood finish protection)
• Hardware kit
• Installation instructions

Product Description

The Go Rhino 731300T is an XE Series hood hinge light mount for a 30-inch single row LED light bar on the 2018-2024 Jeep Wrangler JL and JLU and the 2020-2024 Jeep Gladiator JT, excluding the Wrangler Rubicon 392 and the Gladiator Mojave Edition. The mount positions the light bar at the front of the Jeep's hood using the factory hood hinge bolt locations as attachment points - a no-drill mounting approach that leaves the body completely unmodified while delivering a forward-facing lighting position that illuminates the trail well ahead of the vehicle's path.

The bracket design straddles the hood without interfering with normal hood opening and closing, so the light bar remains installed through routine under-hood maintenance access. The low-profile geometry keeps the bar positioned below the driver's forward sightline through the windshield, so the added lighting does not intrude into the driver's field of view during trail driving. Rubber gaskets installed between the mount brackets and the hood surface protect the factory paint from metal contact damage and absorb vibration between the mount and the hood panel under off-road conditions.

The 731300T is specific to 30-inch single row LED light bars - dual row bars and wider single row bars are not compatible with this mount geometry. Buyers should confirm their light bar is a 30-inch single row configuration before ordering. The light bar itself is not included. Installation uses basic hand tools and the factory hinge bolt locations, taking approximately 30 minutes. Mild steel construction is zinc plated at the base and finished with a textured black powder coat for corrosion resistance in outdoor trail and road use. Manufactured in North America. Backed by a Limited Lifetime structural warranty and a 5-year warranty on the textured black finish.