FOX 803-35-016 Upper Control Arm Kit Black for 09-26 Dodge Ram 1500 Non-Air Ride

Vehicle Fitment

• 2009-2012 Ram 1500 3.7L V6 / 4.7L V8 / 5.7L V8 (Non-Air Ride)
• 2013 Ram 1500 3.6L V6 / 4.7L V8 / 5.7L V8 (Non-Air Ride)
• 2014-2018 Ram 1500 3.0L V6 EcoDiesel / 3.6L V6 / 5.7L V8 (Non-Air Ride)
• 2019-2024 Ram 1500 3.0L V6 EcoDiesel / 3.6L V6 / 5.7L V8 (Non-Air Ride)
• 2025-2026 Ram 1500 3.0L I6 / 3.6L V6 (Non-Air Ride)

Fitment Notes

• Non-air ride suspension models only
• Does NOT fit Ram 1500 TRX or RHO
• Does NOT fit Ram 1500 with factory air ride suspension
• Bolt-on installation -- no chassis modification required
• Fully adjustable caster and camber via 3/4" chromoly heim joints
• Ideal companion for lift or leveling kits
• Also available in Orange: FOX 803-35-015
• Sold as a pair

Features

• FOX upper control arm kit -- CNC machined in the USA
• T6061 billet aluminum construction with Type II anodization
• 1.25" hard chrome plated uniballs with low carbon steel race
• PTFE uniball liner for noise-free comfortable ride
• 3/4" chromoly heim joints with Kevlar fiber reinforced PTFE liner
• Fully adjustable for fine-tuning caster and camber alignment
• Stainless steel taper misalignment spacers and 12-point bolts
• Corrects geometry when running lift or leveling kits
• Maximizes droop travel for increased off-road articulation
• Black finish for corrosion resistance

Specifications

• Type: Upper Control Arm Kit
• Position: Front
• Material: T6061 Billet Aluminum (CNC Machined)
• Finish: Black Type II Anodized
• Uniball: 1.25" Hard Chrome Plated with PTFE Liner
• Heim Joint: 3/4" Chromoly with Kevlar Fiber PTFE Liner
• Hardware: Stainless Steel Taper Misalignment Spacers, 12-Point Bolts
• Adjustability: Caster and Camber
• Installation: Bolt-On, No Modification
• Install Time: Approximately 3 Hours
• Quantity: Pair (Left and Right)

Included Components

• 2x FOX CNC billet aluminum upper control arms (Black)
• 1x Installation manual
• 1x Complete installation hardware kit

Product Description

The FOX 803-35-016 is an upper control arm kit in Black for the 2009-2026 Ram 1500 without air ride suspension, excluding TRX and RHO models. Each arm is CNC machined in the USA from T6061 billet aluminum with Type II anodization for superior corrosion resistance and a sleek performance appearance. The premium 1.25-inch hard chrome plated uniballs with low carbon steel race and PTFE liner deliver extended service life and noise-free operation, while the 3/4-inch chromoly heim joints with Kevlar fiber reinforced PTFE liners provide fully adjustable caster and camber tuning for precise alignment correction.

FOX engineers optimized the UCA geometry specifically for the Ram 1500 platform, making these arms the ideal first step when building a mid-travel truck or correcting suspension geometry after installing a lift or leveling kit. Lifting a vehicle introduces excessive caster that compromises alignment and handling -- FOX UCAs provide the necessary correction while maximizing droop travel for significantly increased off-road articulation. Additional caster adjustment also reduces high-speed wander for more confident highway driving. Stainless steel taper misalignment spacers and 12-point bolts at the steering knuckle ensure a reliable and precise fit with a straightforward bolt-on installation requiring no modification to the vehicle chassis. Also available in Orange under part number 803-35-015.