Fabtech K2097M 6" Basic Lift Kit w/ Stealth Shocks for 1999-00 Ford F-250/F-350

Vehicle Fitment

• 1999-2000 Ford F-250 Super Duty (2WD, gas or 6.0 L diesel)
• 1999-2000 Ford F-350 Super Duty (2WD, gas or 6.0 L diesel)
• Important Note: Kit is specified for non-dually 2WD models only - not compatible with dually or 4WD configurations.

Features

• Provides a full 6" front and rear suspension lift for significant ground clearance
• Heavy-duty 1/4" thick I-beam / radius-arm relocation brackets to preserve geometry when lifting
• Extended-length front coil springs to support the raised suspension
• Rear block & U-bolt kit to raise the rear ride height and balance stance
• Includes drop pitman arm to correct steering geometry after lift
• Front and rear performance "Stealth" monotube shocks included for improved damping and control over rough terrain
• Allows fitment of larger tires - e.g. up to approximately 315/75R16 on 16x8 wheels (with correct back-spacing, minor trimming may be required)
• Designed to maintain the use of stock radius-arm / I-beam suspension structure - no need for full suspension redesign

Specifications

• Lift height: +6.0" front and rear :contentReference[oaicite:1]{index=1}
• Front suspension: stock I-beams/radius arms relocated via heavy-duty drop brackets + extended coil springs :contentReference[oaicite:2]{index=2}
• Rear suspension: block lift kit with U-bolts included :contentReference[oaicite:3]{index=3}
• Included shocks: 2x front Stealth monotube shocks, 2x rear Stealth monotube shocks :contentReference[oaicite:4]{index=4}
• Drive / axle compatibility: 2WD, non-dually only - kit is not rated for dually trucks :contentReference[oaicite:5]{index=5}
• Wheel/tire compatibility (approximate): up to 315/75R16 (~34-35" diameter) - actual fitment depends on wheel width, offset/back-spacing, and possible trimming :contentReference[oaicite:6]{index=6}

Included Components

• 1x set of heavy-duty I-beam / radius-arm relocation brackets (front)
• 1x set of extended-length front coil springs
• 1x rear block kit with U-bolts
• 1x drop pitman arm
• 2x front Stealth monotube shocks
• 2x rear Stealth monotube shocks
• 1x set of alignment cams / hardware required for installation

Product Description

The Fabtech K2097M is a complete 6" suspension lift kit purpose-built for 1999-2000 2WD Ford F-250 and Ford F-350 Super Duty trucks (gas or 6.0 L diesel, non-dually). By relocating the stock I-beams and radius arms with heavy-duty drop brackets and swapping to extended-length coil springs up front, the kit raises ride height while preserving proper suspension geometry. The rear block and U-bolt kit raise the back to match front lift, giving a balanced stance. Included "Stealth" shocks front and rear help maintain ride comfort and off-road damping - offering a strong combination of lifted ride and control.

This kit is ideal for truck owners who want dramatic ground clearance gains, better off-road capability, and the ability to install larger all-terrain tires without drastically altering suspension architecture - since the stock suspension is maintained and modified rather than replaced. Installation is relatively straightforward with included hardware, but because the lift is significant and the geometry is altered, a professional alignment is strongly recommended.

Important Note: K2097M is specifically designed for 2WD, non-dually 1999-2000 F-250/F-350 Super Duty trucks. It is **not compatible** with dual-rear-wheel / dually models or 4WD configurations. Before purchase, confirm your drivetrain, axle, and wheel/tire setup. After installation, verify brake-line clearance, steering geometry, suspension travel, and perform a full alignment to ensure safe handling.