Exergy E04 40106 10 mm Stroker CP4.2 Pump for 11-19 Ford 6.7 L Powerstroke

Vehicle Fitment

• 2011-2019 Ford F-250/F-350/F-450/F-550 Super Duty (6.7 L V8 Powerstroke, 2WD/4WD)

Fitment Notes

• Designed exclusively for the 6.7 L V8 Powerstroke engine from model years 2011-2019; not compatible with non-6.7 L Powerstroke engines or other makes.
• This is a high-output replacement pump and requires the factory lift-pump or equivalent to maintain proper fuel feed pressure; not a direct "stock replacement" in all cases.

Features

• 10 mm stroker version of the CP4.2 high-pressure fuel pump engineered for 6.7 L Powerstroke applications.
• Upgraded heavy-duty FPRV screen (two-layer 10-micron or equivalent) to provide enhanced debris protection compared to factory single-layer designs. 
• Test-bench validated under extreme conditions: run at high RPM and high rail pressures to verify durability. 
• Supports high-horsepower setups (commonly up to 800 + HP or more depending on system) while maintaining factory form-factor.
• No core charge required - simplified installation process. 
• Plug-and-play mechanical fitment with factory pump location; retains original mounting points for easier installation. 
• Designed to work with OEM or appropriately configured fuel supply system, reducing risk of system failures in upgraded fuel systems. 
• Manufactured and tested by Exergy as part of their heavy-duty diesel fuel system portfolio with a focus on high-pressure common-rail reliability. 

Specifications

• Part Number: E04 40106
• Type: 10 mm Stroker CP4.2 High-Pressure Fuel Pump for 6.7 L Powerstroke
• Fitment Engine: 6.7 L V8 Powerstroke diesel (model years 2011-2019 Ford Super Duty) 
• Tested to support up to 800 + HP depending on ancillary fuel system and engine build. 
• Weight: Approx. 18 lbs (shipping weight) per manufacturer data. 
• Must be used in conjunction with adequate feed/lift pump to maintain proper rail feed pressure; Exergy specifies minimum pump feed pressure when used with this unit. 

Included Components

• 1 x Exergy E04 40106 10 mm Stroker CP4.2 Fuel Pump Assembly

Product Description

The Exergy E04 40106 is a performance-engineered high-pressure fuel pump specifically designed for the 2011-2019 Ford Super Duty trucks equipped with the 6.7 L V8 Powerstroke engine. This pump upgrade is intended for serious builds needing increased fuel delivery capability while preserving a factory-style look and fitment.

Equipped with a stroked 10 mm CP4.2 core and upgraded internals - including a heavy-duty feed screen to reduce contamination risk - this unit is bench-tested under extreme conditions to support high-horsepower applications up to and beyond 800 HP when installed with a compatible fuel supply system. Installation is straightforward, using the factory pump location and mounting points; however, proper fuel feed pressure and system matching are critical for optimum performance and durability.

Before installing, ensure your truck's engine is the 6.7 L Powerstroke, that the model year falls within 2011-2019, and that your fuel delivery system (especially lift pump/feed pressure) is configured to meet the demands of the upgraded pump. This is not a one-to-one OEM replacement in lower power applications but a premium upgrade for performance-driven builds.