Enkei 543-895-6538BK Triumph 18x9.5 5x114.3 +38mm Gloss Black 10-Spoke MAT Wheel

Vehicle Fitment

• Universal fitment for vehicles with a 5x114.3 bolt pattern, 72.6mm hub bore, and compatible offset - buyer must verify caliper clearance, suspension clearance, and offset compatibility for their specific vehicle before purchase.

Fitment Notes

• This is a universal wheel sold by bolt pattern specification (5x114.3), not vehicle-specific fitment. Confirm your vehicle's hub bore, offset range, and brake caliper clearance before ordering.
• The 5x114.3 bolt pattern with a 72.6mm hub bore is common across vehicles including Honda Civic Type R (FK8/FL5), Honda Accord, Honda CR-V, Acura Integra, Acura TLX, Nissan 370Z, Infiniti Q50, Infiniti Q60, Mazda MX-5 Miata, Mazda RX-8, Mazda 3, Mazda 6, Mazda CX-5, Subaru WRX / WRX STI (2015+), Subaru BRZ (2013-2024), Toyota GR86 / 86 / FR-S (2013-2024), Scion FR-S (2013-2016), Lexus IS, Lexus RC, Mitsubishi Lancer Evolution, and others. This list is for general reference only and does not constitute a fitment guarantee.
• Hub-centric rings may be required if your vehicle's hub bore is smaller than 72.6mm.
• Lug nuts, TPMS sensors, and valve stems are NOT included and must be purchased separately.
• Sold individually (1 wheel per unit). A set of 4 requires 4 units.

Features

• Built using the same MAT (Most Advanced Technology) process used to manufacture the Enkei RPF1 - one of the most respected lightweight performance wheels in the enthusiast community - making the Triumph a direct beneficiary of Enkei's most advanced production technology in a tuning-market wheel.
• 10 sleek, evenly spaced spokes that deliver a clean, race-inspired profile widely recognized from motorsport and track-day environments, giving the Triumph a sporty aesthetic that translates equally well to street builds.
• The MAT process combines one-piece casting with a rim-forming spin technique that dramatically improves aluminum grain structure, producing a wheel that is lighter and more fatigue-resistant than conventional casting can achieve at equivalent geometry.
• Part of Enkei's Tuning Series, the Triumph is designed for modern sports coupes and sedans where the combination of visual character and genuine engineering substance is equally important.
• Finished in Gloss Black - a deep, highly reflective finish that provides a bold, aggressive aesthetic that complements a wide range of vehicle colors and body styles.
• Validated to Enkei's Spec-E certification, which demands a higher impact drop point and 20% more cycles in rotary bending fatigue and dynamic radial fatigue testing than JWL (Japan Light Alloy Wheel) baseline standards require.
• One-piece alloy construction provides uniform load distribution across all ten spokes and eliminates structural weak points introduced by joinery between sections.
• Exposed lug nut design emphasizes the motorsport-influenced visual character of the wheel and facilitates straightforward installation and removal.
• Non-directional spoke layout allows mounting on any corner without rotational restriction.
• Available in Gloss Black, Matte Bronze, and Storm Gray finishes in 17" and 18" sizes across multiple bolt patterns and offsets.

Specifications

• Part Number: 543-895-6538BK
• Series: Tuning Series
• Wheel Diameter: 18 inches
• Wheel Width: 9.5 inches
• Bolt Pattern: 5x114.3mm (5x4.5")
• Offset: +38mm
• Hub Bore: 72.6mm
• Backspacing: 6.75 inches
• Frontspacing: 3.73 inches
• Weight: 29.00 lbs per wheel
• Load Rating: 1,521 lbs per wheel
• Spoke Count: 10
• Construction: One-piece MAT process aluminum alloy
• Finish: Gloss Black
• Exposed Lugs: Yes
• Directional: No
• Warranty: Manufacturer's Lifetime Structural Warranty; 1-Year Finish Warranty

Included Components

• 1x Enkei Triumph 18x9.5 +38mm 5x114.3 72.6mm Gloss Black Alloy Wheel (543-895-6538BK)
• Note: Lug nuts, valve stems, hub-centric rings, and TPMS sensors are NOT included.

Product Description

The Enkei Triumph (543-895-6538BK) is an 18x9.5 one-piece MAT-process aluminum alloy wheel in Gloss Black, part of Enkei's Tuning Series and built on a specific and significant engineering credential: it uses the same MAT (Most Advanced Technology) manufacturing process that Enkei applies to the RPF1 - widely regarded as one of the best lightweight performance wheels in the aftermarket. By applying that same process to the Triumph, Enkei brings RPF1-level material technology into a ten-spoke design sized for the broader sport sedan and coupe market. The result is a wheel that carries genuine engineering substance beneath its track-inspired aesthetic: the ten sleek spokes create a profile commonplace on race circuits worldwide, and the MAT process ensures that each spoke is made from aluminum that has been processed to dramatically superior grain structure compared to conventional casting.

The MAT process combines one-piece casting with a rim-forming spin technique that refines the aluminum's grain structure at a material level, producing measurably better fatigue resistance and strength per unit mass. This allows the Triumph to be engineered with thinner cross-sections without compromising structural integrity - which is how a 10-spoke 18x9.5 wheel achieves the lightweight character the design targets. Every Triumph passes Enkei's Spec-E certification, which demands a higher impact drop point and 20% more fatigue test cycles than JWL requirements mandate. At 18x9.5 with a +38mm offset and 72.6mm hub bore, this configuration is well-suited as a staggered rear fitment or square setup on sport compacts and sedans in the 5x114.3 platform family.

This configuration - 18x9.5, 5x114.3 bolt pattern, +38mm offset, 72.6mm hub bore - targets the wide 5x114.3 platform family spanning Japanese and Korean sport compacts, performance sedans, and coupes. Buyers should confirm brake caliper clearance, inner fender clearance, and hub-centric ring requirements for their specific vehicle before purchase. Lug nuts, valve stems, and TPMS sensors are not included and must be sourced separately. This listing covers one (1) wheel; a complete set of four requires four units.