Enkei 467-885-1238HS Raijin Tuning 18x8.5 Hyper Silver 5x120 +38mm MAT Wheels

Vehicle Fitment

• Universal fitment - this wheel does not carry vehicle-specific application data. It is drilled for the 5x120 bolt pattern only. Buyers must independently verify fitment against their vehicle's bolt pattern, offset requirements, hub bore, and brake clearance before purchase.

Fitment Notes

• Single bolt pattern: 5x120 - confirm your vehicle uses this bolt pattern before ordering. Common 5x120 applications include BMW 1, 2, 3, 4, 5, 6, 7, and 8 Series; Mini Cooper; Chevrolet Camaro; Cadillac CTS and XTS; Buick LaCrosse and Regal; Pontiac G8 and GTO; Tesla Model S and Model X; Land Rover Discovery and Range Rover Sport; and others.
• Hub bore is 72.6mm - hub-centric rings may be required for vehicles with a different factory hub bore diameter. Verify your vehicle's hub bore before installation.
• Offset is +38mm (backspacing: 6.25 in) - verify this offset is compatible with your vehicle's suspension geometry and brake caliper clearance.
• This is the Hyper Silver finish variant. The Raijin 18x8.5 / 5x120 / +38mm is also available in Matte Black (467-885-1238BK) and Matte Gunmetal (467-885-1238GM).
• 18" wheels include a standard center cap. The flat center cap available with 19" Raijin wheels can also be used with 18" variants if preferred.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.

Features

• Named after Raijin, the Japanese god of thunder, this wheel's split 7-spoke mesh design is inspired by a crackling lightning bolt - the spokes spread across the full face of the wheel right to its edge, creating a visually immersive profile with little traditional lip and a forward-thrusting character.
• Built using Enkei's MAT (Most Advanced Technology) flow-forming process - the same construction method used on the legendary RPF1 - combining a cast aluminum center with a rim-spinning operation that pressure-densifies the barrel, producing a wheel that is significantly lighter than conventional casting at equivalent structural strength.
• At approximately 19 lbs per wheel for the 18x8.5 size, the Raijin delivers meaningful unsprung mass reduction compared to OEM alloy wheels on the BMW, Camaro, and other 5x120 platforms it is designed to serve.
• Designed as a lightweight street wheel with everyday-driver durability in mind - the MAT construction provides the performance benefits of weight reduction (improved braking response, quicker acceleration, better fuel efficiency) without the cost premium of a full racing wheel.
• Rim-Rolled barrel technology shapes the rim section to improve material elongation and impact resistance without sacrificing hardness, enhancing the wheel's ability to absorb road impacts over daily driving cycles.
• Available in 18 and 19-inch diameters across Silver, Black, Matte Gunmetal, and Titanium Gray (Special Order) finishes, with a broad range of bolt patterns including 5x114.3, 5x120, 5x100, and 5x112 depending on size and configuration.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 467-885-1238HS
• Wheel Model: Raijin
• Series: Tuning Series
• Wheel Diameter: 18 inches
• Wheel Width: 8.5 inches
• Bolt Pattern: 5x120
• Offset: +38mm
• Backspacing: 6.25 inches
• Hub Bore: 72.6mm
• Load Rating: 1,540 lbs per wheel
• Weight: approximately 19 lbs per wheel
• Finish: Hyper Silver
• Wheel Structure: One Piece
• Construction: MAT Flow-Forming (Rotary Forged)
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 7
• Spoke Style: Split mesh
• Lug Style: Exposed

Included Components

• 1x Enkei Raijin 18x8.5 Hyper Silver Wheel (467-885-1238HS)
• 1x Standard center cap
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei Raijin (467-885-1238HS) is an 18x8.5 Tuning Series wheel in Hyper Silver, drilled for the 5x120 bolt pattern at +38mm offset. The 5x120 configuration positions this SKU for BMW, Mini Cooper, Chevrolet Camaro, Cadillac, Buick, Pontiac, Tesla, and Land Rover platforms - the Raijin's premium aesthetic and lightweight MAT construction make it a practical upgrade for these vehicles, where OEM wheel weights are often substantial and aftermarket 5x120 options with serious construction quality at a competitive price are relatively few. The Hyper Silver finish adds a bright, machined-look appearance that complements the darker body colors common on BMW and Camaro platforms without the starkness of a polished or chrome finish.

Construction uses Enkei's MAT flow-forming process - the same technology that defines the RPF1 - combining a cast center with a pressure-spinning rim operation that densifies the barrel material and reduces weight to approximately 19 lbs per wheel. For context, MartiniWorks notes this makes the 18x8.5 Raijin the lightest wheel Enkei produces in Tuning Series at this size, with a weight advantage of up to 4 lbs per wheel over many OEM alternatives. The split 7-spoke mesh design references the lightning aesthetic of its namesake deity - the spokes extend fully to the wheel's face edge, creating a forward, aggressive visual character well suited to the sport sedan and muscle car platforms this bolt pattern serves. Spec-E testing, Rim-Rolled barrel construction, and a 1,540 lb load rating complete the performance credentials.

Because the 467-885-1238HS is a universal fitment wheel, buyers must independently verify compatibility with their specific vehicle before purchase - confirming the 5x120 bolt pattern, hub bore clearance at 72.6mm, offset suitability at +38mm, and adequate brake caliper clearance. Hub-centric rings and lug nuts are not included. The same Raijin 18x8.5 / 5x120 / +38mm configuration is available in Matte Black (467-885-1238BK) and Matte Gunmetal (467-885-1238GM). Minimum order quantity from Enkei's US inventory is 4 wheels; single-wheel orders may be sourced directly from Japan with extended lead times.