Enkei 545-580-4935WM PF06 15x8 +35 White Machined 6-Spoke Racing Wheel 4x100

Vehicle Fitment

• Universal Fitment - 4x100 Bolt Pattern, 15x8, +35 Offset, 67mm Hub Bore
• Compatible with vehicles using a 4x100 bolt pattern (verify fitment before purchase)

Fitment Notes

• This is a universal wheel sold by bolt pattern - not application-specific. Confirm your vehicle's bolt pattern, offset clearance, hub bore, and brake caliper clearance before ordering.
• Hub bore on this 4x100 variant is 67mm. Hub rings may be required if your vehicle's hub bore is smaller than 67mm.
• Lug nuts, TPMS sensors, and hub rings are NOT included - purchase separately as needed.
• All wheels must be test-fit to the vehicle before mounting tires; mounted wheels cannot be returned.
• Due to the narrow and deep lug socket pockets in the H-Cross Spoke design, low-profile aftermarket lug nuts are strongly recommended. Standard OEM lug sockets may scratch the machined spoke faces during installation.
• This 15x8 / +35 configuration ships with a Rear (R) face profile - the deepest concavity depth in the PF06 lineup for this size, creating a significant spoke dish and wide visible barrel lip.
• The White Machined finish requires careful maintenance - use pH-neutral wheel cleaners and avoid abrasive products or harsh chemicals that can damage or discolor the white painted base or the machined surfaces.
• This is a Special Order item - lead times may vary. Verify current stock with your retailer before ordering.
• Common 4x100 platforms include select Honda Civic, Honda Fit, Mazda MX-5 Miata (NA/NB/ND), Toyota Corolla/Yaris/Prius, Volkswagen Golf/Polo/Jetta (older), Mini Cooper, Mitsubishi Mirage, Nissan Versa, and others - verify your specific year and trim before ordering.

Features

• Six-spoke design inspired by Enkei's classic 1990s Japanese circuit racing heritage - a nostalgic throwback aesthetic that blends retro Japanese motorsport character with modern lightweight engineering and precision manufacturing
• H Cross Spoke (HCS) geometry borrowed directly from the Enkei GTC02: each spoke is shaped in cross-section like an H-beam, with machined side cuts removing material from low-stress zones identified through advanced CAE strength analysis - achieving maximum stiffness-to-weight ratio in a classic-profile spoke
• Step Rim shape: the barrel transitions through a stepped profile that adds visual depth, enhances the deep-dish aesthetic, and contributes structural rigidity to the barrel section without adding unnecessary mass
• White Machined (WM) finish: a white painted base with precision CNC-machined spoke faces and outer lip ring - the machined silver surfaces contrast sharply against the white barrel for a clean, high-contrast, classically Japanese competition wheel appearance
• Rear (R) face profile on this 15x8 / +35 configuration - the deepest concave spoke depth for this size, producing a dramatic spoke dish and wide visible barrel lip ideal for low-offset aggressive fitments on compact 4x100 platforms
• MAT (Most Advanced Technology) Rim-Roll construction: combines one-piece casting with a flow-forming step that spins and elongates the rim section under pressure, producing near-forged aluminum grain density and tensile strength in the barrel while maintaining the freedom of design that casting allows
• Manufactured in Japan at Enkei's state-of-the-art facilities for the highest level of precision, quality, and finish consistency
• Enkei Spec-E Inspected: surpasses JWL standards with a higher drop point in impact testing and 20% additional cycles for both rotary bending and dynamic radial fatigue load tests
• Available in 15, 16, 17, and 18-inch diameters across 4x100 and 5x114.3 bolt patterns in Black Machined (BKM), White Machined (WM), Gold (GG), and Hyper Silver (HS) finishes
• JWL and VIA certified for road-use safety and compliance

Specifications

• Part Number: 545-580-4935WM
• Wheel Model: PF06 (Racing Series)
• Wheel Size: 15x8 (15-inch diameter, 8-inch width)
• Bolt Pattern: 4x100
• Offset: +35mm
• Hub Bore: 67mm
• Backspacing: 5.88 inches
• Load Rating: 1,102 lbs per wheel
• Approximate Weight: ~14.45 lbs
• Finish: White Machined (WM) - White base with CNC-machined spoke faces and outer lip ring
• Face Profile: R (Rear - maximum/deep concavity)
• Spoke Count: 6 (H Cross Spoke geometry)
• Rim Design: Step Rim Shape
• Construction: One-Piece Aluminum Alloy with MAT Rim-Roll Technology, H Cross Spoke, Step Rim
• Manufactured In: Japan
• Lug Style: Exposed Lugs
• Finish Warranty: 1 Year
• Structural Warranty: Manufacturer's Lifetime
• Series: Racing Series - Special Order (Limited Availability)
• Certifications: Spec-E Inspected, JWL, VIA

Included Components

• 1x Enkei PF06 Wheel (15x8 / 4x100 / +35 / White Machined / Rear Face)
• 1x Center Cap
• 1x Valve Stem (Racing)
• 1x EK Dazzle Wheel Sticker (with application instructions on reverse)
• Note: Lug nuts, hub rings, and TPMS sensors are NOT included
• Note: Low-profile aftermarket lug nuts are strongly recommended due to deep spoke socket pockets

Product Description

The Enkei PF06 (Part# 545-580-4935WM) is a 15x8 one-piece MAT aluminum alloy wheel in White Machined finish, manufactured in Japan and engineered to capture the visual spirit of 1990s Japanese circuit racing in a modern, lightweight competition package. The White Machined (WM) finish is one of the most distinctive and period-correct color choices in the PF06 lineup - a white painted base with precision CNC-machined spoke faces and outer lip ring that delivers the high-contrast white-and-silver look associated with the iconic Japanese motorsport wheels of the bubble era. The deep Rear (R) concave face profile on this 15x8 / +35 configuration amplifies the classic deep-dish appearance, placing the machined spoke faces back into the barrel for a look that reads immediately as competition-derived.

The PF06's structural engineering is as technically deliberate as its aesthetic. The H Cross Spoke (HCS) geometry - borrowed directly from the Enkei GTC02 - shapes each spoke in cross-section like an H-beam connecting rod, with machined side cuts removing material from the spoke sides precisely where advanced strength analysis identifies the lowest stress concentration. This produces a spoke that is simultaneously lighter and stiffer than a solid rectangular cross-section of the same profile. The Step Rim barrel profile adds structural depth to the barrel section while reinforcing the visual deep-dish character of the Rear face. Both are combined with Enkei's MAT Rim-Roll manufacturing process, which flow-forms the rim section after casting to produce near-forged aluminum grain density in the barrel - achieving approximately 14.45 lbs total wheel weight in this 15x8 configuration.

The White Machined finish requires careful maintenance to preserve both the white painted base and the machined surfaces - pH-neutral wheel cleaners are recommended, and abrasive products or harsh chemicals should be avoided. Due to the narrow, deep lug nut socket pockets inherent to the H-Cross Spoke design, low-profile aftermarket lug nuts are strongly recommended to prevent scratching the machined spoke faces during installation. The PF06 is a Special Order item manufactured in Japan - lead times vary by retailer. Each wheel includes a center cap, racing valve stem, and EK Dazzle Wheel sticker. Sold individually - a set of four is recommended for a complete upgrade.