Enkei 562-895-6545GM NVR5 18x9.5 +45 Matte Gunmetal Racing Wheel 5x114.3

Vehicle Fitment

• Universal Fitment - 5x114.3 Bolt Pattern, 18x9.5, +45 Offset, 75.0mm Hub Bore
• Compatible with vehicles using a 5x114.3 bolt pattern (verify fitment before purchase)

Fitment Notes

• This is a universal wheel sold by bolt pattern - not application-specific. Confirm your vehicle's bolt pattern, offset clearance, hub bore, and brake caliper clearance before ordering.
• Hub rings may be required if your vehicle's hub bore is smaller than 75.0mm.
• Lug nuts, TPMS sensors, and hub rings are NOT included - purchase separately as needed.
• All wheels must be test-fit to the vehicle before mounting tires; mounted wheels cannot be returned.
• This SKU features a Middle (M) face concave depth - positioned between the F (Front) and R (Rear/most concave) face options in the NVR5 lineup. Verify the desired concave depth before ordering.
• Common 5x114.3 platforms include select Acura, Honda, Infiniti, Lexus, Mazda, Mitsubishi, Nissan, Subaru, and Toyota models - verify your specific year and trim before ordering.

Features

• 5 split-spoke (twin-spoke) design with integrated lug holes, engineered using CAE (Computer-Aided Engineering) analysis for high-performance and endurance-style racing applications
• Flow-forming (MAT) rim construction spins and rolls the rim section after casting, improving material density and elongation for a stronger, lighter rim without full forging cost
• Middle (M) concave face design delivers a deep dish appearance while maintaining structural rigidity across the spoke layout
• Matte Gunmetal finish provides a subdued, performance-oriented aesthetic that complements both track-focused and street builds
• Enkei Spec-E Inspected: surpasses JWL standards with a higher impact drop point and 20% additional cycles for rotary bending and dynamic radial fatigue testing
• One-piece aluminum alloy construction with exposed lug design for reduced hardware weight and clean visual integration with the spoke pattern
• Developed directly from feedback across multiple motorsport disciplines including endurance racing, drift, and performance street driving
• Available in three distinct face depths - F (Front), M (Middle), and R (Rear/most concave) - allowing fitment to be matched precisely to suspension geometry and brake caliper clearance
• JWL and VIA certified for road-use safety compliance

Specifications

• Part Number: 562-895-6545GM
• Wheel Model: NVR5 (Racing Series)
• Wheel Size: 18x9.5 (18-inch diameter, 9.5-inch width)
• Bolt Pattern: 5x114.3
• Offset: +45mm
• Hub Bore: 75.0mm
• Finish: Matte Gunmetal (Painted)
• Face Design: Middle (M) - moderate concave depth
• Spoke Count: 10 (5 pairs of twin spokes)
• Construction: One-Piece Aluminum Alloy with Flow-Forming Rim Technology
• Lug Style: Exposed Lugs
• Series: Racing Series - Special Order (Limited Availability)
• Certifications: Spec-E Inspected, JWL, VIA
• Also Available In: Dark Hyper Silver (DHS) finish

Included Components

• 1x Enkei NVR5 Wheel (18x9.5 / 5x114.3 / +45 / Matte Gunmetal / Middle Face)
• 1x Center Cap
• Note: Lug nuts, hub rings, valve stems, and TPMS sensors are NOT included

Product Description

The Enkei NVR5 (Part# 562-895-6545GM) is an 18x9.5 one-piece flow-formed racing wheel finished in Matte Gunmetal and engineered to the demands of high-performance and endurance motorsport. The NVR5 is part of Enkei's dedicated Racing Series lineup and was developed using CAE (Computer-Aided Engineering) structural analysis, with direct feedback from real-world competition across endurance racing, drifting, and performance driving disciplines. The result is a 5 split-spoke architecture - effectively 10 individual spokes paired into twin sets - with lug holes integrated directly into the spoke structure for maximum rigidity at the hub interface and a clean, purposeful appearance.

The 562-895-6545GM features a Middle (M) concave face, which places it between the Front (F) flat-face and Rear (R) deep-concave options in the NVR5 range. This moderate dish depth gives the wheel a striking visual depth while maintaining adequate clearance for a wide range of brake caliper configurations. The rim is manufactured using flow-forming technology, which spins and elongates the rim section of the cast wheel under high pressure - improving material strength and reducing rim weight without requiring a full forging process. Combined with Enkei's Spec-E testing protocol, which exceeds JWL requirements with a higher impact drop point and 20% additional fatigue cycles, the NVR5 is built to perform under sustained load at the limit.

The NVR5 is a Special Order / Limited Availability item within the Enkei Racing Series - lead times may vary depending on inventory. This wheel is sold as a universal fitment based on its 5x114.3 bolt pattern, 18x9.5 size, and +45mm offset. Buyers should confirm compatibility with their vehicle's hub bore, brake caliper clearance, and fender fitment before mounting tires. Hub rings, lug nuts, TPMS sensors, and valve stems are not included. Sold individually - a set of four is recommended for a complete performance upgrade.