Enkei 476-880-6540SP Kojin 18x8 Matte Silver 5x114.3 +40mm MAT Racing Wheels

Vehicle Fitment

• Universal fitment - this wheel does not carry vehicle-specific application data. It is drilled for the 5x114.3 bolt pattern only. Buyers must independently verify fitment against their vehicle's bolt pattern, offset requirements, hub bore, and brake clearance before purchase.

Fitment Notes

• Single bolt pattern: 5x114.3 (5x4.5) - confirm your vehicle uses this bolt pattern before ordering. The 5x114.3 bolt circle is among the most widely used in the sport compact, sport sedan, and performance coupe segment, covering a broad range of Nissan, Mazda, Honda, Mitsubishi, Subaru, Toyota, Lexus, Kia, Hyundai, Ford, and Acura platforms.
• Hub bore is 72.6mm - hub-centric rings may be required depending on your vehicle's factory hub bore diameter. Verify before installation; rings are not included.
• Offset is +40mm (backspacing: 6.07 in, frontspacing: 1.93 in). This is a conservative, street-friendly offset well suited to OEM suspension geometry on a broad range of 5x114.3 sport compact and sport sedan platforms. Verify clearance with your specific brake and suspension setup before installing.
• The Kojin is also available in 18x8 / 5x114.3 in Matte Black (476-880-6540BK) and at +45mm offset in both finishes (476-880-6545SP, 476-880-6545BK).
• The Kojin lineup also covers 5x100, 5x112, and 5x120 bolt patterns across the 17 and 18-inch size range. Verify the correct bolt pattern variant before purchase.
• 17x9 and 18x9.5 Kojin variants feature greater spoke concavity than the 18x8 - the 18x8 uses a lower-concavity face profile. See part numbers 476-890-6540SP and 476-895-6540SP for wider options.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.
• A center cap is included with purchase. Valve stems are not included and must be sourced separately.

Features

• The Kojin takes the traditional 5-spoke wheel design and adds carefully considered contours along each spoke face, producing an assertive tuner aesthetic without the visual excess of overly aggressive spoke treatments - a balance that reads as purposeful and sport-oriented across a wide range of sport compact and performance sedan applications.
• Built using Enkei's MAT (Most Advanced Technology) flow-forming process, combining a cast aluminum center with a rim-spinning operation that pressure-densifies the barrel section, producing a wheel that is significantly lighter than conventional casting of equivalent dimensions and substantially stronger in the rim barrel area where impact resistance matters most.
• At approximately 20 lbs per wheel in the 18x8 size, the Kojin delivers meaningful unsprung mass reduction compared to OEM alloy wheels on the sport compact and sport sedan platforms the 5x114.3 bolt pattern serves - with real-world improvements in steering feel, acceleration response, and braking performance.
• Matte Silver finish is a subdued, low-gloss metallic that differentiates the Kojin from the standard polished or hyper silver finishes common in the segment - pairing well with darker body colors where a bright wheel would create excessive contrast, and with lighter colors where a polished finish might look too formal.
• Available in both Matte Silver and Matte Black across sizes from 17 to 18 inches and widths from 8 to 9.5 inches, the Kojin lineup covers a wide range of sport compact, sport sedan, and performance coupe fitments in 5x100, 5x112, 5x114.3, and 5x120 bolt patterns.
• Spoke label details are incorporated between each flared spoke, a subtle branding element that adds visual texture to the face without disrupting the clean line of the spoke design.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 476-880-6540SP
• Wheel Model: Kojin
• Series: Racing Series
• Wheel Diameter: 18 inches
• Wheel Width: 8 inches
• Bolt Pattern: 5x114.3 (5x4.5)
• Offset: +40mm
• Backspacing: 6.07 inches
• Frontspacing: 1.93 inches
• Hub Bore: 72.6mm
• Load Rating: 1,540 lbs per wheel
• Weight: approximately 20 lbs per wheel
• Finish: Matte Silver
• Wheel Structure: One Piece
• Construction: MAT Flow-Forming (Rotary Forged)
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 5
• Spoke Style: Contoured 5-spoke with flared edges
• Lug Style: Exposed

Included Components

• 1x Enkei Kojin 18x8 Matte Silver Wheel (476-880-6540SP)
• 1x Center cap
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei Kojin (476-880-6540SP) is an 18x8 Racing Series wheel in Matte Silver, drilled for the 5x114.3 bolt pattern at +40mm offset. The Kojin is one of the newer additions to Enkei's lineup and represents a departure from the full-race heritage of the RPF1 and PF01 - it's a street-first wheel designed around a refined interpretation of the classic 5-spoke that adds character through spoke contours and flared edge detailing without leaning into the loud, overtly motorsport-derived aesthetics that define Enkei's Racing Series track wheels. The result is a wheel that reads as modern and sport-oriented on a daily-driven sport compact or sport sedan without demanding attention the way a racing-derived design does.

Construction uses the same MAT flow-forming process found in the RPF1 and PF01 - a cast center with a pressure-spinning rim operation that densifies the barrel material and produces a wheel at approximately 20 lbs per wheel in this 18x8 configuration. The +40mm offset and 6.07-inch backspacing position the Kojin at a street-geometry-friendly depth that works with a wide range of OEM suspension setups on 5x114.3 platforms without requiring modifications. The 72.6mm hub bore is standard across the Kojin line; hub-centric rings may be required depending on your vehicle's factory bore - verify before installation.

Because the 476-880-6540SP is a universal fitment wheel, buyers must independently verify compatibility with their specific vehicle before purchase. A center cap is included; valve stems, lug nuts, and hub-centric rings are not. The Matte Black variant is available as 476-880-6540BK. Minimum order from Enkei's US inventory is 4 wheels; single-wheel orders require direct Japan sourcing with extended lead times.