Enkei 409-670-12BK J10 16x7 Matte Black Machined Lip 5x100/5x114.3 Subaru BRZ

Vehicle Fitment

• 2013-2020 Subaru BRZ (Base, Limited, Premium, tS, Series.Gray, Series.Yellow, Series.White, RWD, 2.0L H4)
• 2022-2025 Subaru BRZ (Base, Limited, Premium, tS, RWD, 2.4L H4)
• 2013-2016 Scion FR-S (Base, RWD, 2.0L H4)
• 2017-2020 Toyota 86 (Base, GT, TRD SE, RWD, 2.0L H4)
• 2022-2025 Toyota GR86 (Base, Premium, RWD, 2.4L H4)

Fitment Notes

• Dual-drilled 5x100 / 5x114.3 bolt pattern - all confirmed fitments above use the 5x100 bolt pattern. The 5x114.3 drilling is present but not required for these vehicles.
• Hub bore is 72.62mm; hub-centric rings may be required depending on the specific vehicle's hub bore diameter - verify before installation.
• Offset is +38mm (backspacing: 5.50 in, frontspacing: 2.51 in) - verify clearance with your specific brake and suspension setup before installing.
• This is the Matte Black with Machined Lip version. For the Silver with Machined Lip version in this same size and bolt pattern, see part number 409-670-12SP.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.
• A center cap is included with purchase.

Features

• Clean 10-spoke design with a matte black painted face and machined lip, delivering a sharp two-tone contrast finish that complements the low, aggressive roofline and wide fender proportions of the BRZ / FR-S / 86 / GR86 platform family.
• Dual-drilled 5x100 / 5x114.3 bolt pattern is factory-correct for the 5x100 BRZ / FR-S / 86 / GR86 platform, with the secondary 5x114.3 drilling providing flexibility for other compatible vehicles in the builder's fleet.
• The 16x7 size at +38mm offset is a direct-fitment upgrade over the factory wheel sizing on the BRZ / FR-S / 86 platform, providing a wider contact patch and a more assertive stance while maintaining full OEM clearance.
• Exposed lug design integrates the lug seat directly into the wheel face for a purposeful, motorsport-influenced aesthetic consistent across the J10 Performance Series lineup.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• One-piece cast alloy construction provides a consistent, balanced wheel structure with predictable performance characteristics and no multi-piece joint variance.
• Available in the same 5x100 / 5x114.3 / +38mm configuration across the full J10 diameter range (16, 17, and 18 inches), allowing builds to step up in wheel size while maintaining finish consistency.
• Load rating of 1,522 lbs per wheel provides ample capacity for the sport coupe and lightweight RWD platform this configuration is designed for.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 409-670-12BK
• Wheel Model: J10
• Series: Performance Series
• Wheel Diameter: 16 inches
• Wheel Width: 7 inches
• Bolt Pattern: 5x100 / 5x114.3 (dual-drilled)
• Offset: +38mm
• Backspacing: 5.50 inches
• Frontspacing: 2.51 inches
• Hub Bore: 72.62mm
• Load Rating: 1,522 lbs per wheel
• Finish: Matte Black with Machined Lip
• Wheel Structure: One Piece
• Construction: Cast Alloy
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 10
• Lug Style: Exposed

Included Components

• 1x Enkei J10 16x7 Matte Black with Machined Lip Wheel (409-670-12BK)
• 1x Center cap
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei J10 (409-670-12BK) is a 16x7 Performance Series wheel finished in Matte Black with a machined lip accent, dual-drilled for 5x100 and 5x114.3 and designed with the Subaru BRZ / Scion FR-S / Toyota 86 / GR86 platform as its primary fitment target. This is one of the few J10 SKUs that carries confirmed vehicle-specific fitment data from Enkei's authorized dealer network, covering the full run of the ZC6-chassis BRZ and FR-S (2013-2020), the GR86-generation BRZ (2022-2025), and the Toyota 86 (2017-2020) and GR86 (2022-2025). The 16x7 size at +38mm offset steps up from OEM wheel dimensions while maintaining full brake and suspension clearance, and the matte black with machined lip finish provides a clean, modern look that contrasts well against the low, wide stance these platforms are known for.

Construction follows Enkei's Spec-E testing standard throughout - a benchmark that requires a higher impact drop point and 20% more fatigue test cycles than mandatory JWL minimums, ensuring the wheel is built to withstand both daily road use and spirited track-day driving. The one-piece cast alloy structure delivers a 1,522 lb load rating well suited to the lightweight RWD sport coupe segment, and the dual-drilled 5x100 / 5x114.3 bolt pattern provides secondary compatibility flexibility without compromising the structural integrity of the primary hole set.

This wheel is sold individually and a set of four is required for complete fitment. Hub-centric rings and lug nuts are not included and must be sourced separately - verify hub bore compatibility at 72.62mm for your specific vehicle before purchase. A center cap is included with each wheel. For the Silver with Machined Lip version in this same size and bolt pattern, see 409-670-12SP. The same 5x100 / 5x114.3 / +38mm configuration is also available in 17-inch (409-770-12BK) and 18x7.5-inch (409-875-12BK) sizes for builders who want to step up in diameter while keeping the same finish and fitment.