Eibach E20-15-023-03-22 Sportline Lowering Spring Kit for 2015- B9 Audi A4 / A4

Vehicle Fitment

• 2015-(later) Audi A4 B9 (2.0T / 2.0 TDI / Mild-Hybrid) Quattro & 2.0T / 2.0 TDI / Mild-Hybrid FWD (sedan & Avant) - where OEM "level control / adaptive ride height" is not equipped

Features

• Full 4-spring Sportline lowering kit - front and rear included
• Aggressive lowering drop for sportier stance and lowered center of gravity
• Progressive-rate spring design for better balance between ride quality and sporty handling
• Reduced body roll, squat under acceleration, and nose-dive under braking for improved handling response
• Improved cornering stability and tighter chassis control when pushing performance driving
• Sportier look with reduced fender-well gap and more aggressive posture
• Designed for use with OEM dampers (no shock replacement required in many cases)
• Includes matching front/rear springs to ensure balanced suspension geometry and safe ride height

Specifications

• Part Number: E20-15-023-03-22
• Kit Type: Sportline Lowering Coil Spring Set (4 springs: front + rear)
• Typical Drop: ~45 mm front / ~40 mm rear (approx. 1.8" F / 1.6" R) when installed on suitable B9 Audi A4 / A4 Avant / A5 (non-level control) vehicles
• Axle Load Limits: front axle up to ~1095 kg; rear axle up to ~1220 kg (per manufacturer / retailer specification) :contentReference[oaicite:1]{index=1}
• Intended Use: Road / sport-oriented driving, lowered stance builds, improved handling setup
• Not compatible with vehicles equipped with air-ride or adaptive/level-control suspension systems (unless verified) :contentReference[oaicite:2]{index=2}

Included Components

• 2x Front Lowering Coil Springs
• 2x Rear Lowering Coil Springs

Product Description

The Eibach E20-15-023-03-22 Sportline Lowering Spring Kit is engineered specifically for use on the B9-chassis Audi A4 (sedan/Avant) and related compatible variants (A5 / Quattro / TDI / Mild-Hybrid) - provided the vehicle does not have factory ride-height control systems. This full-set lowers the car significantly (approx. 45 mm front / 40 mm rear), reducing the center of gravity to improve handling, body control, and cornering stability. The progressive-rate design delivers a sportier, more planted ride while retaining acceptable compliance on everyday roads.

By installing this kit, owners will benefit from tighter steering response, reduced body roll under cornering, improved braking stability, and a more aggressive stance with diminished wheel-well gap - all without needing immediate replacement of dampers. Because matched front and rear springs are included, suspension geometry remains balanced, helping avoid issues such as uneven ride height or imbalanced handling. The lowered ride height also enhances overall road-feel and connection to the chassis, appealing to enthusiasts seeking sport-oriented driving dynamics on their Audi A4 / A5 platforms.

Installation is straightforward when using compatible B9-A4 setups; after installation, a wheel alignment is strongly recommended to ensure proper toe, camber, and ride-height adjustment. As with any lowering kit, owners should verify axle-load limits, check for clearance (wheels, bump stops, bodywork), and confirm their vehicle does not feature adaptive suspension before fitting. For vehicles with stock dampers that are aged or worn, upgrading shocks may improve ride quality and preserve handling benefits.