Eibach 7208.140 Lowering Springs Pro-Kit for 1995-1998 Porsche 911 Carrera/4 993

Vehicle Fitment

• 1995-1998 Porsche 911 Carrera (3.6L H6, RWD, 993)
• 1995-1998 Porsche 911 Carrera 4 (3.6L H6, AWD, 993)

Fitment Notes

• Does NOT fit the 993-generation Porsche 911 Turbo - the Turbo uses a wider body, different wheel hubs, and unique suspension geometry that is incompatible with this spring set.
• Does NOT fit the 993 Carrera S or Carrera 4S - these wide-body variants share the Turbo's wider rear suspension pickup points and are not confirmed fitments.
• Designed for and tested with factory Porsche MacPherson strut (front) and multi-link (rear) dampers. Aftermarket performance dampers are recommended for best results when lowering.
• The 993 was the final air-cooled 911 generation. This kit is not compatible with any water-cooled 996 or later 911 generations.
• Eibach does not guarantee fitment, height, or warranty on unlisted applications.

Features

• Lowers the Porsche 911 993 Carrera 1.3 in. front and 1.0 in. rear, closing factory fender-well gap and delivering a more purposeful, aggressive stance
• Lowers the Porsche 911 993 Carrera 4 1.3 in. front and 1.0 in. rear - same drop as the RWD Carrera, balanced to the AWD platform's weight distribution
• Progressive spring rate design provides a compliant initial response for street use while stiffening progressively under hard cornering loads to reduce body roll without sacrificing ride quality
• Lowers the center of gravity to reduce squat during acceleration, nose-dive under braking, and lateral body roll in corners - three of the 993's primary dynamic improvement areas
• Engineered specifically for the 993's air-cooled MacPherson strut front and multi-link rear suspension geometry
• Designed and tested with factory Porsche dampers - no shock absorber change is required, though performance dampers are recommended for maximum benefit
• Shot-peened and electrostatic powder-coated for long-term corrosion resistance
• Backed by Eibach's Five-Year Warranty against factory defects in material and workmanship

Specifications

• Part Number: 7208.140
• Product Type: PRO-KIT Lowering Springs (Set of 4)
• Front Drop - Carrera (RWD): 1.3 in. (approx. 33mm)
• Rear Drop - Carrera (RWD): 1.0 in. (approx. 25mm)
• Front Drop - Carrera 4 (AWD): 1.3 in. (approx. 33mm)
• Rear Drop - Carrera 4 (AWD): 1.0 in. (approx. 25mm)
• Spring Design: Progressive rate
• Platform: Porsche 911 993 (1995-1998)
• Drivetrain: RWD (Carrera) and AWD (Carrera 4)
• Warranty: 5-Year limited warranty (factory defects in material and workmanship)

Included Components

• 2x Front progressive lowering springs
• 2x Rear progressive lowering springs

Product Description

The Eibach 7208.140 PRO-KIT is a set of four progressive lowering springs engineered specifically for the 1995-1998 Porsche 911 Carrera and Carrera 4 - the 993 generation, and the last of the iconic air-cooled 911 lineage. Dropping 1.3 inches up front and 1.0 inch at the rear, the PRO-KIT tightens the 993's stance by eliminating the factory fender-well gap without resorting to the extreme drops that compromise daily drivability. The asymmetric drop - slightly more in the front - reflects the 993's rear-engine weight bias and is engineered to preserve the neutral, well-balanced handling characteristic that makes the 993 one of the most celebrated driver's cars of its era.

The progressive spring design is central to why this kit works on a car as dynamically sensitive as the 993. The outer, softer coil winds absorb road imperfections and routine driving loads smoothly, preserving the ride quality that makes the 993 usable every day. As cornering forces build, the spring rate rises progressively to resist body roll and maintain flat, composed cornering - a behavior that complements the 993's multi-link rear suspension and allows the car to communicate chassis feedback clearly to the driver. The kit is designed and tested with the factory Porsche MacPherson strut front and multi-link rear dampers, meaning a shock absorber change is not required, though pairing with quality aftermarket performance dampers will yield additional gains.

Both the RWD Carrera and the AWD Carrera 4 share the same drop specification with this kit, reflecting the similar suspension geometry between the two drivetrains at the 993's front axle. The 993 Turbo, Carrera S, and Carrera 4S are explicitly excluded - these variants use the wider Turbo body with different rear suspension geometry that is incompatible with this spring set. Manufactured by Eibach and covered by a Five-Year Warranty, the 7208.140 PRO-KIT is the definitive performance handling upgrade for any 993 Carrera or Carrera 4 owner seeking improved dynamics without compromising the character that defines this generation.