Eibach AC41-82-089-01-02 Rear Camber Arm Kit for 2020-2026 Toyota GR Supra A90

Vehicle Fitment

• 2020-2026 Toyota GR Supra 3.0L (B58 I6 Turbo, RWD, A90 - 8-Speed Automatic)
• 2023-2026 Toyota GR Supra 3.0L (B58 I6 Turbo, RWD, A91 - 6-Speed Manual)
• 2021-2026 Toyota GR Supra 2.0T (B48 I4 Turbo, RWD, A90 - 8-Speed Automatic)

Fitment Notes

• Rear camber arms only - does not adjust front camber; for a complete alignment solution pair with front alignment components as applicable
• Total rear camber adjustment range: 0.0° to -4.5° when measured with Eibach Pro-Kit springs installed; range at factory ride height will vary
• Designed for use at factory ride height or with aftermarket suspension; suitable for street alignment correction and track camber tuning
• Eibach does not guarantee fitment or specifications for unlisted applications

Features

• Billet 6061-T6 aluminum construction - lightweight yet significantly stronger than OEM steel arms
• Motorsport-grade Aurora PTFE-lined rod-ends and bearings for precise, low-friction camber adjustment with long service life
• Fixed inboard bearing design eliminates the slop and reduced clearance associated with turnbuckle-style adjustable arms
• All adjustments made at the outboard end - no need to reach inboard to tighten lock-nuts, simplifying on-car setup and alignment changes
• Precise camber corrections prevent uneven tire wear caused by suspension lowering or ride height modifications
• Wide adjustment range (0° to -4.5°) suits both conservative street alignment and aggressive track camber setups
• Direct bolt-on replacement for OEM rear camber arms - no drilling, cutting, or modification required
• Backed by Eibach's Two-Year Limited Warranty against factory defects in material and workmanship

Specifications

• Part Number: AC41-82-089-01-02
• Application: Rear Camber Arms (Pair)
• Camber Adjustment Range: 0.0° to -4.5° (with Eibach Pro-Kit)
• Construction: Billet 6061-T6 Aluminum
• Bearing Type: Aurora PTFE-Lined Motorsport Rod-Ends
• Adjustment Location: Outboard End
• Inboard Mount: Fixed Bearing
• Finish: Anodized / Natural Billet

Included Components

• 2x Eibach PRO-ALIGNMENT Adjustable Rear Camber Arms (Left and Right)
• All necessary mounting hardware

Product Description

The Eibach AC41-82-089-01-02 PRO-ALIGNMENT Rear Camber Arm Kit is a precision alignment component engineered specifically for the A90/A91 Toyota GR Supra, covering the 2020-2026 model years across all engine variants - the 3.0L B58 six-cylinder (automatic and manual) and the 2.0T B48 four-cylinder. After lowering or changing ride height on any Supra, the rear suspension geometry shifts, typically pushing camber into negative territory beyond factory alignment limits. This kit replaces the fixed-length OEM rear camber arms with adjustable billet units, restoring proper alignment and allowing precise dialing of rear camber anywhere from 0.0° to -4.5° - enough range for both daily driver correction and aggressive track-day setups.

Unlike conventional turnbuckle-style camber arms, Eibach's design uses a fixed inboard bearing with outboard-end adjustment, providing greater structural integrity and eliminating the clearance issues common with center-adjust designs. All adjustments are made from the outboard end for easy tool access on the car, without the hassle of tightening inboard lock-nuts. The Aurora PTFE-lined motorsport bearings are designed for both long road service life and the lateral loads of track driving. A professional alignment should always be performed after installation to confirm final settings.