Eibach E10-40-043-01-22 Pro-Kit Lowering Springs for 2022-2026 Honda Civic FWD

Vehicle Fitment

• 2022-2026 Honda Civic LX / Sport Sedan (2.0L FWD, FE/FL)
• 2022-2026 Honda Civic LX / Sport Hatchback (2.0L FWD, FE/FL)
• 2022-2026 Honda Civic EX / EX-L / Touring / Sport Touring Sedan (1.5L Turbo FWD, FE1)
• 2022-2026 Honda Civic EX / EX-L / Touring / Sport Touring Hatchback (1.5L Turbo FWD, FE1)

Fitment Notes

• FWD only -- does not fit AWD applications
• Standard Civic only -- Civic Si uses E10-40-043-02-22; Type R uses E10-40-043-03-22
• Rear Camber Kit 5.67476K required for proper alignment after install
• ~1.2 in. front drop / ~1.0 in. rear drop
• Tested with factory OE dampers
• Wheel alignment required after installation
• Set of 4 springs

Features

• Eibach Pro-Kit series
• Progressive spring rate design
• Lowers center of gravity -- reduces body roll
• Reduces brake dive and acceleration squat
• Compatible with factory OE dampers
• High tensile strength spring steel
• Powder coated for corrosion resistance
• Made in USA
• 5-year limited warranty

Specifications

• Part Number: E10-40-043-01-22
• Series: Pro-Kit
• Spring Design: Progressive rate
• Front Drop: ~1.2 in.
• Rear Drop: ~1.0 in.
• Drivetrain: FWD only
• Required Alignment Part: Eibach 5.67476K Rear Camber Kit
• Quantity: Set of 4
• Prop 65: Yes
• Country of Origin: USA
• Warranty: 5-Year Limited

Included Components

• 4x Eibach Pro-Kit progressive lowering springs

Product Description

The Eibach E10-40-043-01-22 is a Pro-Kit progressive lowering spring set for the 2022-2026 Honda Civic (standard trims -- LX, Sport, EX, EX-L, Touring, Sport Touring) in both Sedan and Hatchback body styles with FWD. This kit lowers the 11th-gen Civic approximately 1.2 inches in front and 1.0 inch in the rear, closing the fender gap and lowering the center of gravity for reduced body roll, less brake dive, and sharper cornering response. Progressive spring rate technology provides a compliant initial feel that increases proportionally under load, preserving daily comfort while improving limit handling.

Designed and tested to work with factory OE dampers -- no shock replacement required. Important: Eibach specifies that the Rear Camber Kit (part# 5.67476K) is required for proper alignment after installation on this platform -- this is a mandatory purchase alongside this spring kit. The Civic Si and Type R use separate Eibach part numbers (E10-40-043-02-22 and E10-40-043-03-22 respectively). Wheel alignment required after installation. Made in the USA. Backed by Eibach's 5-year limited warranty.