Eibach E30-35-054-01-22 Pro-Lift-Kit Lift Springs for 21-26 Mustang Mach-E AWD

Vehicle Fitment

• 2021-2026 Ford Mustang Mach-E Select, Route 1, Premium AWD - Extended Range & Extended Range X (Electric Motor AWD)

Fitment Notes

• Fits AWD Extended Range and Extended Range X battery configurations only - Select, Premium, and California Route 1 trims in AWD with Extended Range battery.
• Does not fit Mach-E GT or GT Performance Edition (GTPE) - those applications require separate Eibach part numbers.
• Does not fit Mach-E RWD Standard Range (70 kWh) or Mach-E RWD Extended Range models - those configurations are not listed by Eibach for this part number.
• Tested with factory dampers. No separate aftermarket shocks are required for installation.
• A professional wheel alignment is required after installation.

Features

• Raises ride height +1.5" in the front and +1.5" in the rear for increased ground clearance and a more commanding stance
• Full-travel spring lift design - allows complete factory suspension travel without the added stress on ball joints and bushings caused by spacer lift systems
• Linear front spring rate (200 lbs/in) and linear rear spring rate (950 lbs/in) deliver consistent, predictable ride behavior across all driving conditions
• Engineered specifically for the Mustang Mach-E AWD Extended Range platform, accounting for the vehicle's electric drivetrain weight distribution
• Improves ground clearance for AWD Mach-E owners in regions with snow, rough roads, or where additional underbody protection is desired
• Increases fender clearance for larger aftermarket wheel and tire fitments
• Maintains excellent on-road stability and handling - no compromise to daily drivability
• Tested and validated with factory OE dampers - bolt-on installation using factory mounting points
• No drilling or permanent modifications required
• Made in the U.S.A. - manufactured at Eibach's facility in Corona, California

Specifications

• Front Lift Height: +1.5"
• Rear Lift Height: +1.5"
• Front Spring Rate: 200 lbs/in (linear)
• Rear Spring Rate: 950 lbs/in (linear)
• Position: Front and Rear
• Drivetrain: AWD (All-Wheel Drive) only
• Battery: Extended Range and Extended Range X
• Compatible Trims: Select, Route 1, Premium AWD
• Damper Compatibility: Tested with OE factory dampers
• Quantity: Set of 4 Springs (2 front, 2 rear)
• Country of Origin: Made in U.S.A.
• Warranty: Five-Year Warranty against factory defects in material and workmanship

Included Components

• 2x Front Pro-Lift-Kit Coil Springs
• 2x Rear Pro-Lift-Kit Coil Springs

Product Description

The Eibach E30-35-054-01-22 PRO-LIFT-KIT is a complete set of four lift springs engineered specifically for the 2021-2026 Ford Mustang Mach-E Select, Route 1, and Premium in AWD with Extended Range or Extended Range X battery. Unlike spacer lifts that restrict suspension travel and accelerate wear on bushings and ball joints, this is a full-travel coil spring replacement that raises the Mach-E +1.5" at both the front and rear. Eibach developed the spring rates - 200 lbs/in linear front and 950 lbs/in linear rear - to account for the unique weight distribution of the Mach-E's electric drivetrain and battery pack, delivering a balanced and consistent lift across both axles without the spring rate mismatches common in generic lift applications.

This PRO-LIFT-KIT is particularly well-suited for Mach-E AWD owners in climates with heavy snow, rural roads, or anywhere additional ground clearance and underbody protection are priorities. The increased fender clearance also opens the door for larger-diameter tire fitments beyond the stock setup. The linear spring rates at both ends ensure a predictable, stable ride character - well suited to the Mach-E's quiet, smooth EV powertrain. Because Eibach tested this kit with the factory OE dampers, no companion shocks are required; the springs install directly in place of the factory units using the factory mounting hardware.

This kit fits only the AWD Extended Range and Extended Range X configurations of the Mach-E in Select, Route 1, and Premium trims. It does not fit the Mach-E GT, GT Performance Edition, or any RWD model - those applications use different spring geometry and are served by separate Eibach part numbers. A four-wheel alignment is required after installation to restore factory suspension geometry and ensure even tire wear.