Eibach E10-35-054-05-22 Pro-Kit Lowering Springs for 21-26 Mustang Mach-E GT AWD

Vehicle Fitment

• 2021-2026 Ford Mustang Mach-E GT AWD (GE 1 / Performance Pack, Electric Motor AWD) - Vehicles equipped with MagneRide Damping System only

Fitment Notes

• Designed exclusively for Mach-E GT AWD models equipped with the MagneRide Damping System (GT Performance Edition / GTPE). Does not fit Mach-E GT AWD without MagneRide.
• Does not fit Mach-E Standard Range or Extended Range non-GT models - see part numbers E10-35-054-01-22, E10-35-054-02-22, or E10-35-054-03-22 for those applications.
• Designed for use with OE (factory) shock absorbers. Not compatible with aftermarket dampers unless verified by Eibach.
• A professional wheel alignment is required after installation.

Features

• Engineered specifically for the MagneRide Damping System on the Mach-E GT AWD - ensures full compatibility with the factory adaptive damper calibration
• Lowers ride height 1.2" in the front and 1.1" in the rear for a sportier, more aggressive stance
• Linear front spring rate (211 lbs/in) tuned to work harmoniously with MagneRide's adaptive electronic damping
• Progressive rear spring rate (799-1,089 lbs/in) delivers a compliant everyday ride that stiffens progressively under hard cornering loads
• Reduces center of gravity to improve stability, reduce body roll, and improve cornering precision
• Decreases excessive fender-well gap for a cleaner, more performance-oriented appearance
• Contributes to improved aerodynamic efficiency - lower ride height reduces underbody drag for better EV range
• No permanent modifications required - bolt-on installation using factory mounting points
• Finished in Eibach's signature black powder coat for corrosion resistance and long-term durability
• Manufactured from Eibach's proprietary high-tensile spring steel using precision CNC coiling technology

Specifications

• Front Drop: -1.2" (approximately -30mm)
• Rear Drop: -1.1" (approximately -28mm)
• Front Spring Rate: 211 lbs/in (linear)
• Rear Spring Rate: 799-1,089 lbs/in (progressive)
• Spring Finish: Black Powder Coat
• Fitment: 2021-2026 Ford Mustang Mach-E GT AWD w/ MagneRide Damping System
• Drivetrain: AWD (All-Wheel Drive) only
• Compatible Damper: OE MagneRide shock absorbers
• Quantity: Set of 4 Springs (2 front, 2 rear)
• Warranty: Limited Lifetime Warranty against factory defects in material and workmanship

Included Components

• 2x Front Lowering Springs
• 2x Rear Lowering Springs

Product Description

The Eibach E10-35-054-05-22 PRO-KIT is the first lowering spring specifically engineered for the Ford Mustang Mach-E GT Performance Edition (GTPE) equipped with Ford's MagneRide Damping System. Unlike conventional lowering springs that can interfere with adaptive damper calibration, this kit was developed in direct coordination with the MagneRide system's electronic control logic. The result is a drop of 1.2" up front and 1.1" out back - closing the fender gap, sharpening the SUV's visual presence, and meaningfully lowering the center of gravity without compromising the MagneRide system's performance envelope.

Eibach engineers selected a linear front spring rate of 211 lbs/in to complement the MagneRide damper's electronically variable response, ensuring consistent and predictable handling feedback across all drive modes. The progressive rear springs (799-1,089 lbs/in) offer a compliant ride under normal conditions while adding progressive stiffness during aggressive cornering - reducing squat under hard acceleration and minimizing nose-dive under braking. Together, the spring package improves both the dynamic capability and the aerodynamic efficiency of the Mach-E GT, which can translate to modest improvements in range at highway speeds due to reduced aerodynamic drag.

Installation is a direct, no-drill bolt-on procedure using the Mach-E's factory suspension mounting points. The kit is designed to function with the factory OE shock absorbers and does not require any modifications to the MagneRide system. A professional wheel alignment is strongly recommended after installation to restore factory geometry and ensure even tire wear. This kit is exclusively compatible with GT AWD models equipped with MagneRide - owners of GT models without MagneRide should reference part number E10-35-054-04-22, which is tuned for that application.