Eibach E86-35-056-05-22 Pro-Truck Coilover 2.0 HD Lift 21-26 Ford Bronco 4WD

Vehicle Fitment

• 2021-2026 Ford Bronco Base - 2-Door & 4-Door (2.3L EcoBoost 4WD | Non Sasquatch)
• 2021-2026 Ford Bronco Big Bend - 2-Door & 4-Door (2.3L EcoBoost & 2.7L V6 EcoBoost 4WD | Non Sasquatch)
• 2021-2026 Ford Bronco Black Diamond - 2-Door & 4-Door (2.3L EcoBoost & 2.7L V6 EcoBoost 4WD | Non Sasquatch)
• 2021-2026 Ford Bronco Outer Banks - 2-Door & 4-Door (2.3L EcoBoost & 2.7L V6 EcoBoost 4WD | Non Sasquatch)
• 2021-2026 Ford Bronco Badlands - 2-Door & 4-Door (2.3L EcoBoost & 2.7L V6 EcoBoost 4WD | Non Sasquatch) - Front: +0.3-2.6" | Rear: +1.7-3.1"
• 2021-2026 Ford Bronco First Edition - 2-Door & 4-Door (2.7L V6 EcoBoost 4WD)
• 2021-2026 Ford Bronco - Any Model w/ Sasquatch Package - 2-Door & 4-Door (2.3L EcoBoost & 2.7L V6 EcoBoost 4WD) - Front: +0-2.2" | Rear: +1.3-2.7"
• 2021-2022 Ford Bronco Wildtrack - 2-Door & 4-Door (2.7L V6 EcoBoost 4WD | HOSS 2.0 / Bilstein)

Fitment Notes

• Lift heights vary by trim and package - Sasquatch-equipped models have a reduced front adjustment range (+0-2.2") due to their factory-lifted suspension geometry.
• Non-Sasquatch models achieve up to +2.6" front and +3.1" rear lift.
• Wildtrack fitment is confirmed for 2021-2022 only (HOSS 2.0 / Bilstein shock variant); 2023+ Wildtrack is not listed.
• Listed lift heights are measured with 150 lbs additional weight over the front axle and 500 lbs over the rear. Actual heights may vary with different load distributions.
• This is the HD Springs variant (05-22) - upgraded spring rates compared to the standard Stage 2 coilover kit (01-22).
• Eibach does not guarantee fitment or performance on unlisted applications.

Features

• Full front-and-rear Pro-Truck Coilover 2.0 system with upgraded HD springs pre-installed - no additional spring sourcing needed.
• Threaded spring perch on front coilovers allows precise ride height adjustment from full low to full high across the listed range.
• 46mm monotube piston with nitrogen-filled variable force valving for consistent, controlled damping on- and off-road.
• Anodized 6061-T6 billet aluminum coilover mounts for corrosion resistance and long-term structural integrity.
• ERO off-road race spring compatible - supports further spring upgrades without replacing the shock bodies.
• Individually dyno-tested for matched front-to-rear performance consistency right out of the box.
• Made in the U.S.A. by Eibach. Backed by a 2-year limited warranty.

Specifications

• Front Lift Range (Non-Sasquatch, e.g. Badlands): +0.3-2.6"
• Rear Lift Range (Non-Sasquatch, e.g. Badlands): +1.7-3.1"
• Front Lift Range (Sasquatch Package): +0-2.2"
• Rear Lift Range (Sasquatch Package): +1.3-2.7"
• Shock Type: Pro-Truck Coilover 2.0 - Front & Rear
• Piston Diameter: 46mm Monotube
• Valving: Nitrogen-Filled Variable Force
• Spring Type: Upgraded HD (Heavy Duty) ERO-Compatible Springs
• Mount Material: Anodized 6061-T6 Billet Aluminum
• Drivetrain: 4WD Only
• Warranty: 2-Year Limited Warranty

Included Components

• 2x Pro-Truck Coilover 2.0 Front Struts with HD Springs (Left & Right)
• 2x Pro-Truck Coilover 2.0 Rear Shocks with HD Springs (Left & Right)
• 1x 6mm Adjustment Spanner Wrench
• 1x Required Mounting Hardware
• 1x Installation Instructions

Product Description

The Eibach E86-35-056-05-22 PRO-TRUCK Coilover 2.0 with HD Springs is a complete front-and-rear coilover lift system purpose-built for the 2021-2026 Ford Bronco in both 2-Door and 4-Door configurations, covering all major trims across the 2.3L EcoBoost and 2.7L V6 EcoBoost engines. The HD Springs variant (05-22) sets itself apart from the standard Stage 2 kit with heavier-rate springs pre-installed at all four corners, making it the preferred choice for Bronco owners who run added accessories, armor, winches, or regularly load the vehicle on the trail. Non-Sasquatch trims can achieve up to 2.6 inches of front lift and 3.1 inches of rear lift; Sasquatch-equipped models deliver a reduced but still substantial range of up to 2.2 inches front and 2.7 inches rear.

Each coilover features a threaded spring perch for on-vehicle ride height tuning, a nitrogen-filled 46mm monotube for consistent damping, and anodized 6061-T6 billet aluminum mounts engineered to handle the stresses of repeated off-road use. The system is bolt-on compatible with factory Bronco control arms and requires no cutting or major modifications. Every unit is individually dyno-tested before leaving the facility and is backed by Eibach's 2-year limited warranty. Made in the U.S.A.