EBC S3KF1129 Stage 3 Greenstuff 6000 Front Brake Kit for 03-09 Toyota 4Runner

Vehicle Fitment

• 2003-2009 Toyota 4Runner (SR5, Sport Edition, Limited, 4.0L V6 / 4.7L V8, RWD/4WD) - requires 338mm front rotors / 17-in. wheel on 2003-2006 SR5/Sport/Limited; all 2007-2009
• 2003-2009 Lexus GX470 (Base, 4.7L V8, RWD/4WD)

Fitment Notes

• Front axle only - does not include rear brake components
• 2003-2006 Toyota 4Runner SR5, Sport, and Limited trims with factory 338mm (13.3 in.) front rotors and 17-inch wheels required for correct fitment; smaller rotor variants are not compatible

Features

• EBC Greenstuff 6000 Series pads built with Aramid fiber for heavy-duty truck and SUV use
• Improves braking performance by up to 10-20% over OEM pads with no fall-off under repeated use
• GD Series rotors use a wide-aperture slot and dimple design to reduce rotor temps by up to 200°F
• Geomet anti-corrosion coating provides long-term rust and oxidation resistance
• Dimpled (blind-drilled) design allows pad degassing without the stress cracking risk of through-drilled holes
• Pads are fully shimmed, slotted, and chamfered for quiet, vibration-free operation
• EBC patented Brake-In coating enables fast pad seating immediately after installation
• Medium dust level - significantly cleaner on wheels than factory pads

Specifications

• Position: Front
• FMSI Pad Number: D976
• Rotor Diameter: 338mm (13.3 in.)
• Rotor Height: 67.5mm
• Rotor Thickness: 28mm
• Center Hole Diameter: 108mm
• Bolt Holes: 6
• Rotor Type: Vented, Dimpled and Slotted
• Rotor Finish: Geomet Black Anti-Corrosion Coating
• Included Rotor Part Number: GD7238
• Included Pad Part Number: DP61657

Included Components

• 2x EBC GD Series Dimpled and Slotted Front Brake Rotors
• 1x Set EBC Greenstuff 6000 Series Front Brake Pads
• 1x EBC Caliper Lube

Product Description

The EBC S3KF1129 Stage 3 Brake Kit delivers a direct-fit front brake upgrade for the 2003-2009 Toyota 4Runner (SR5, Sport Edition, and Limited) and 2003-2009 Lexus GX470. It pairs the Greenstuff 6000 Series brake pads with EBC's GD Series dimpled and slotted rotors into a single kit that improves bite, reduces dust, and virtually eliminates brake noise over OEM components.

The Greenstuff 6000 pads are formulated with Aramid fiber specifically for the demands of heavier trucks and SUVs, handling repeated hard stops and light towing without fade or performance drop-off. The GD Series rotors are machined from OE-spec grey cast iron and finished with Geomet coating for lasting corrosion resistance. Wide-aperture slots channel heat away from the pad contact zone, while blind-drilled dimples promote pad degassing without weakening the rotor. The kit mounts directly to factory calipers with no modifications required.