EBC USR7089 USR Sport Slotted Rear Rotors for 2000-2009 Honda S2000 2.0L I4 RWD

Vehicle Fitment

• 2000-2009 Honda S2000 (Base, CR; AP1 2.0L F20C I4 / AP2 2.2L F22C1 I4, RWD)

Fitment Notes

• Fits both AP1 (2000-2003) and AP2 (2004-2009) chassis variants, including the 2008-2009 S2000 CR (Club Racer)
• Rear rotor is solid (non-vented) - pair with USR7088 front rotors for a complete matched axle set
• Do not install upgrade brake pads on the rear axle unless the same upgrade is also fitted to the front
• Do not remove Thermic Black coating with brake cleaner - it clears naturally within the first 10-20 stops

Features

• Fine narrow-profile slot pattern promotes pad degassing and eliminates the wind noise common with wide-slot rotors
• Slots expel heat, water, dust, and debris from the pad contact surface for consistent bite in all conditions
• Promotes flat and parallel pad wear, preventing record-groove wear patterns common with unslotted rotors
• Thermic Black anti-corrosion coating protects rotor surfaces between drives and during storage
• Manufactured from premium G3000/R90-approved grey iron for long service life and thermal stability
• Precision-machined in the UK to OE tolerances for direct bolt-on fitment
• Compatible with EBC Greenstuff, Yellowstuff, and Redstuff brake pad compounds
• Sold as a pair - includes both left and right rear rotors

Specifications

• Position: Rear Axle
• Disc Style: Solid, Slotted
• Disc Diameter: 282mm (11.10 in.)
• Disc Thickness: 12mm
• Disc Height: 40mm
• Number of Bolt Holes: 5
• Finish: Thermic Black Anti-Corrosion Coating

Included Components

• 2x EBC USR7089 Sport Slotted Rear Brake Rotors (Left & Right)

Product Description

The EBC USR7089 USR Series Sport Slotted Rear Rotors are the ideal rear-axle upgrade for Honda S2000 owners looking to improve braking balance and pad longevity without adding noise or harshness. The fine narrow-profile slot design degasses brake pads under hard use, clears moisture and debris from the contact surface, and ensures even, parallel pad wear throughout the life of the rotor - all while remaining significantly quieter than wide-slot alternatives.

Fitting all US-market S2000 variants from 2000 through 2009 - including the AP1 and AP2 chassis and the 2008-2009 CR edition - the USR7089 bolts directly in place of the factory solid rear rotor. For a fully matched braking system, pair with the USR7088 front rotors and EBC Greenstuff, Yellowstuff, or Redstuff pads. No coating removal is required prior to installation.