EBC USR7088 USR Sport Slotted Front Rotors for 2000-2009 Honda S2000 2.0L I4 RWD

Vehicle Fitment

• 2000-2009 Honda S2000 (Base, CR; 2.0L I4 F20C/F22C1, RWD)

Fitment Notes

• Fits both AP1 (2000-2003, F20C 2.0L) and AP2 (2004-2009, F22C1 2.2L) chassis variants
• Fits all US-market S2000 trims including the 2008-2009 S2000 CR (Club Racer)
• Do not install upgrade brake pads on the rear axle unless the same upgrade is also fitted to the front
• Do not remove Thermic Black coating with brake cleaner - it clears naturally within the first 10-20 stops

Features

• Fine narrow-profile slot pattern degasses brake pads under load while eliminating the air noise common with wide-slot rotors
• Slots expel heat, water, dust, and debris from the pad surface for consistent braking in all conditions
• Promotes flat and parallel pad wear, preventing the record-groove wear patterns common with non-slotted rotors
• Thermic Black anti-corrosion coating protects rotor surfaces between drives and during storage
• Manufactured from premium G3000/R90-approved grey iron for long service life and thermal stability
• Precision-machined in the UK to OE tolerances for direct bolt-on installation
• Compatible with EBC Greenstuff, Yellowstuff, and Redstuff brake pad compounds
• Sold as a pair - includes both left and right front rotors

Specifications

• Position: Front Axle
• Disc Style: Vented, Slotted
• Disc Diameter: 300mm
• Maximum Disc Thickness: 25mm
• Minimum Disc Thickness: 23mm
• Disc Height: 40mm
• Center Hole Diameter: 70.1mm
• Number of Bolt Holes: 5
• FMSI Pad Reference: D829
• Finish: Thermic Black Anti-Corrosion Coating

Included Components

• 2x EBC USR7088 Sport Slotted Front Brake Rotors (Left & Right)

Product Description

The EBC USR7088 USR Series Sport Slotted Front Rotors deliver upgraded braking performance for the Honda S2000 without sacrificing the quiet, smooth character the car is known for. The fine narrow-profile slot design promotes pad degassing and clears heat, water, and debris from the braking surface, while avoiding the wind noise associated with wide-slot competitors. Built from premium grey iron and precision-machined to OE specs, these rotors bolt directly in place of the factory units on all AP1 and AP2 S2000 variants, including the 2008-2009 CR.

For best results, pair with EBC Greenstuff, Yellowstuff, or Redstuff brake pads to form a fully matched brake system. The Thermic Black anti-corrosion coating requires no prep before installation - it wears away naturally in the pad sweep area within the first few stops and provides corrosion protection throughout the rotor's service life.